Overview The SL11RIDE is a low-cost, high-speed Universal Serial Bus RISC-based Controller board. It contains a 16-bit RISC processor with built-in SL11RIDE ROM to greatly reduce firmware development efforts. Its serial flash EEPROM interface offers low-cost storage for USB device configuration and customer product specific functions. New functions can be programmed into the I2C by downloading them from a USB Host PC. This unique architecture provides the ability to upgrade products, in the field, without changing the peripheral hardware. Features of SL11RIDE • Two-wire serial EEPROM (I2C) interface port, with SL11RIDE ROM firmware support, to allow on board flash EEPROM programming • Supports 12-MHz/48-MHz external crystal or clock • 6Kx8 internal Mask ROM with built-in BIOS • Supports up to the maximum USB transfer rate of 12 Mbits/sec • Power source requires only 3.3V, and it can be powered via a USB host PC or a Hub • Resume, Suspend, and Low-power modes are available • Includes the necessary firmware to function as a USB to IDE/ATAPI controller Applications Cypress offers a Developer’s Kit with all its product lines. These Developer’s Kits include: ATAPI/IDE firmware, multiple peripheral Mini-port class drivers for Windows98/2000, MAC 8.6 or higher available object code, a complete ATAPI/IDE solution reference design, and a demo board. The SL11RIDE offers solutions for interfacing USB to IDE/ATAPI peripheral products including HDD, CD-ROM, CD-R/RW, ZIP drives, LS120, MO drives, Compact Flash, Disk on Chip, Tape drives, Smart Media cards, ORB, and CLIK, and MicroDrives.
|