# MS9597 Angle Bracket - Summary

## Product Overview
️· Description: 90° Angle Bracket, cadmium plated, made of steel (UNSG41300). Designed for use with a .190 x .250 bolt.
️· Cage Code: 18076
️· Revision: A (dated 7/28/2011)
️· Specification: AS9597

## Material & Finish

️· Material: Steel per AMS 6350
️· Hardness: Rockwell 32-38 HRC (per ASTM E18, oil quenched and tempered)
️· Finish: Cadmium plating per AMS 2400 (dimensions are specified *after* plating).

## Manufacturing Requirements

️· Deburring: Remove burrs and break edges.
️· Edge Treatment: Break sharp edges .003-.015 (unless otherwise specified).
️· Grain Flow: Grain flow must be parallel to the rolling direction.
️· Weight: Approximate weight: .877(A+B) + .145 lbs/100 units

## Part Numbering

️· Format: MS9597-XXX (MS number + dash number from Table 1)
️· Example: MS9597-005 indicates: Bracket, angle, 90°, cadmium plated, .190 bolt, .438 long x .250 bolt, .500 long.

## Dimensions

️· Units: Inches
️· Refer to Table 1 for specific dimensions based on length (A and B) and dash number selection.
️· Length Options (A): 0.438, 0.500, 0.562, 0.625, 0.688, 0.750, 0.812, 0.875, 0.938, 1.000, 1.062, 1.125, 1.188, 1.250, 1.312, 1.375, 1.438, 1.500
️· Length Options (B): 0.500, 0.562, 0.625, 0.688, 0.750, 0.812, 0.875, 0.938, 1.000, 1.062, 1.125, 1.188, 1.250, 1.312, 1.375, 1.500

## Important Warning

️· Cadmium Content: This product utilizes cadmium plating. Be aware of potential environmental and health regulations regarding its use in your location. Consult with local officials.

## Documentation

️· Certified Drawing: Request a certified UMPCO drawing for precise specifications. This drawing takes precedence over this document. If sourced through another organization, the certified drawing must be purchased from them.