1. Header Information

· Company: Bivar (implied by the part type and header information).
· Location: 4 Thomas, Irvine, CA 92618
· Contact: TEL: (949) 951-8808, FAX: (949) 951-3974
· Part Description: T-1 (3mm) LED Holder, 90° Mount, Interlocking Variable Diameter.
· Revision Mark: ® (Registered Trademark symbol).

2. Drawing Information

· Sheet #: 1 of [unknown] (The sheet number is provided, but the total number of sheets isn’t).
· Standard Tolerance:
* .XX ± .01
* .XXX ± .005
* .X ± .1
* X° ± 1° (Angular Tolerance)

3. Material Specification

· Material: Nylon 6/6, 94V-0, Black (This is the primary material used).

4. Revision History (Most Important)

This section tracks changes to the part over time. Here's a reconstructed timeline based on the data:

· Date: 06/19/2009
* Revision: F (presumably the initial revision)
* Action: Added Note 4 (content of note is not provided)
* Responsible: T. Y.
· Date: 07/27/2010
* Revision: G
* Action: Updated Note 4 with Table 3 (content of note is not provided)
* Responsible: T. Y.
· Date: 11/02/2011
* Revision: H
* Action: Removed PPS (likely Polyphenylenesulfide) and GF30 (likely Glass Fiber reinforcement) from material. The material was changed from “Nylon 6/6, PPS, GF30, Black” to just “Nylon 6/6, 94V-0, Black".
* Responsible: T. Y.
· Date: 05/28/2016
* Revision: J
* Action: Removed Material Code (Specific material information removed)
* Responsible: J.C.

5. Part Number List

· H-103C
· H-103C-1
· H-102C-1
· H-101C-1
· H-102C
· H-101C
· H-100C
· H-100C-1

6. Dimensions

A great deal of numerical data is presented but it is not clearly labeled. It is likely a list of dimensions and tolerances associated with different components of the LED holder.

7. Notes and Disclaimers