# PS-LD0301-038(S) LED Converter

## Overview
️· Low profile LED converter for up to 3 LED lines.
️· Optimized for Optrex: T55465D065J-LW-A-AAN & Mitsubishi: AA065VD01.
️· RoHS compliant.
️· Weight: 8g.
️· Dimensions: 64 x 32 x 6.5 mm.

## Features
️· Supports 1-3 LED lines (Serial Mode).
️· Max Output Power: 7W.
️· Max LED Voltage: 25Vdc.
️· Max Lamp Current: 90mAdc.
️· Internal open LED detection.
️· Voltage or external PWM dimming (1000:1 dimming ratio).
️· Remote ON/OFF control.
️· Wide input voltage range.

## Electrical Characteristics
️· Input Voltage: 4.75 ~ 13.2 Vdc.
️· Output Current (Max): 90mAdc (at 100% duty cycle).
️· Output Current (Min): 10% duty cycle.
️· Input Current (Max): 1.0Adc (by 12Vdc).
️· PWM Frequency: 150 - 300 Hz.
️· Open Load Shutdown Voltage: 25Vdc.

## Connections
️· Input (CN1):
- Vin: 4.75 ~ 13.2 Vdc (Pin 1 & 2)
- Vrmt (Remote): 0~1.5V = OFF, 2.5~Vin = ON (Pin 3)
- Ext. PWM: 0~0.5V = LOW, 2.5~5V = HIGH (Pin 4)
- Vbr (Brightness Control): 0.0~5.0V (Pin 5)
- GND: (Pin 6,7,8)
️· Output (CN3):
- RTN1(-): LED Line 1 Return (Pin 1)
- RTN2(-): LED Line 2 Return (Pin 2)
- N.C.: (Pin 3 & 4)
- Vhigh(+): 25Vdc (90mArms) (Pin 5 & 6)

## Environmental
️· Operating Temperature: -20°C ~ +70°C.
️· Storage Temperature: -20°C ~ +85°C.
️· Humidity: Max 95% RH.

## Cables
️· Input: 500mm, stripped & tinned (order key: input cable #13).
️· Output: Matching connectors for Optrex/Mitsubishi (200mm, order key: adapter cable #14).

## Notes
️· Do not use analog dimming and PWM simultaneously.
️· Molex connectors are used in pin terminal style converters.
️· External PWM signal is low active.