| Datenblatt-Suchmaschine für elektronische Bauteile |
|
The question interval is too short.
Please try again in a few seconds.
Hello, Please ask a question about B3714 Datasheet
# Example questions:
➢ What should a customer do to verify a component's suitability for their application?
➢ What is the source and load impedance that the b3714 saw filter is designed to work with?
➢ What is the typical operating temperature range for the b3714 saw filter?
1. Product Identification and Overview
️· Product: SAW (Surface Acoustic Wave) Filter
️· Type: B3714
️· Center Frequency: 314.35 MHz
️· Manufacturer: EPCOS AG
️· Document Date: January 7, 2008
️· Purpose: Designed for remote control receivers.
2. Pin Configuration & Grounding:
️· Pin 1, 3, 4, and 6 are designated as Ground pins.
️· The document emphasizes that following the recommended pin configuration is crucial for optimal performance and minimizing electrical crosstalk.
3. Electrical Characteristics (Key Values - See Table in Original)
️· Operating Temperature Range: -45°C to +85°C
️· Terminating Impedance: 50 Ohms (Source and Load)
️· Insertion Loss (Maximum): 2.5 dB at 25°C
️· Amplitude Ripple: 0.4 dB at 25°C
️· Relative Attenuation: Varies with frequency – See the table in the document for specific values (approx. 55 to 58 at 270.00-286.00 MHz).
️· Insertion Loss at specified temp: up to 2.9 dB at 105 C
4. Maximum Ratings
️· Operable Temperature Range: -45°C to +125°C
️· Storage Temperature Range: -45°C to +125°C
️· DC Voltage: 6V max
️· Source Power: 10 dBm (with 50 Ohm impedance)
5. Ordering Information & References
️· Ordering Code: B39311B3714U410
️· Marking & Package: C61157-A7-A67
️· Packaging: F61074-V8168-Z000
️· Date Codes: L_1126
️· S-Parameters File: B3714_NB.s2p
️· Soldering Profile: S_6001
️· RoHS Compliance: Complies with relevant EU directives regarding hazardous substances.
6. Important Notes & Disclaimers
️· Suitability: EPCOS disclaims responsibility for the suitability of the product for a specific application, emphasizing that customers should perform their own testing and validation.
️· Failure Modes: Recognizes the potential for malfunction or failure and recommends appropriate safety measures in critical applications.
️· Substance Restrictions: Acknowledges that the product may contain regulated substances and directs users to the Material Data Sheets for details.
️· Product Changes: Reserves the right to modify product specifications and discontinue models.
️· Trademark Information: Lists registered and pending trademarks.
7. Contact Information
️· Website: www.epcos.com
️· Contact Local EPCOS Sales Office for technology, price, and delivery questions.
1. Product Identification and Overview
️· Product: SAW (Surface Acoustic Wave) Filter
️· Type: B3714
️· Center Frequency: 314.35 MHz
️· Manufacturer: EPCOS AG
️· Document Date: January 7, 2008
️· Purpose: Designed for remote control receivers.
2. Pin Configuration & Grounding:
️· Pin 1, 3, 4, and 6 are designated as Ground pins.
️· The document emphasizes that following the recommended pin configuration is crucial for optimal performance and minimizing electrical crosstalk.
3. Electrical Characteristics (Key Values - See Table in Original)
️· Operating Temperature Range: -45°C to +85°C
️· Terminating Impedance: 50 Ohms (Source and Load)
️· Insertion Loss (Maximum): 2.5 dB at 25°C
️· Amplitude Ripple: 0.4 dB at 25°C
️· Relative Attenuation: Varies with frequency – See the table in the document for specific values (approx. 55 to 58 at 270.00-286.00 MHz).
️· Insertion Loss at specified temp: up to 2.9 dB at 105 C
4. Maximum Ratings
️· Operable Temperature Range: -45°C to +125°C
️· Storage Temperature Range: -45°C to +125°C
️· DC Voltage: 6V max
️· Source Power: 10 dBm (with 50 Ohm impedance)
5. Ordering Information & References
️· Ordering Code: B39311B3714U410
️· Marking & Package: C61157-A7-A67
️· Packaging: F61074-V8168-Z000
️· Date Codes: L_1126
️· S-Parameters File: B3714_NB.s2p
️· Soldering Profile: S_6001
️· RoHS Compliance: Complies with relevant EU directives regarding hazardous substances.
6. Important Notes & Disclaimers
️· Suitability: EPCOS disclaims responsibility for the suitability of the product for a specific application, emphasizing that customers should perform their own testing and validation.
️· Failure Modes: Recognizes the potential for malfunction or failure and recommends appropriate safety measures in critical applications.
️· Substance Restrictions: Acknowledges that the product may contain regulated substances and directs users to the Material Data Sheets for details.
️· Product Changes: Reserves the right to modify product specifications and discontinue models.
️· Trademark Information: Lists registered and pending trademarks.
7. Contact Information
️· Website: www.epcos.com
️· Contact Local EPCOS Sales Office for technology, price, and delivery questions.
| Part No. | B3714 |
| Manufacturer | EPCOS |
| Size | 52 Kbytes |
| Pages | 6 pages |
| Description | SAW filter Short range devices |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |