Part Number DAC-88GC-2-C, Digital-to-Analog Converters

Specifications

Number of Channels

1

Resolution

12 Bit

Settling Time

3000 ns

Power Consumption

0.7 W

Differential Non-Linearity Error/Other

1.5 LSB

Integral Non-Linearity Error/Other

1 LSB

Package Type

SMT

Required Supply Voltage 1st

15 V

Required Supply Voltage 2nd

-15 V

Required Supply Voltage 3rd

5 V

Operating Temp. Range (min)

0 ºC

Operating Temp. Range (max)

+70 ºC

RoHS

Yes

Status

Recommended for new design

The DAC-88 Series D/A converters are high performance 12-bit devices with a fast

settling voltage output. They are compatible and pin-pin replacement for the standard

DAC88 and 3860 series. They incorporate a level-controlled input storage register and

are specifically designed for systems applications such as data bus interfacing with

computers. When the "load/Register Enable" input is high, data in the storage register is

held, and when the load input is low, data is transferred through to the DAC. There are

two basic models available by coding option: binary and two’s complement. The output

voltage ranges are externally pin programmable and include 0 to +10V, ±5V, and ±10V.

The DAC-88 Series contains a precision zener reference circuit. This eliminates

codedependent ground currents by routing current from the positive supply to the

internal ground node as determined by the R-2R ladder network. The internal feedback

resistors for the on-board amplifier track the ladder network resistors, enhancing

temperature performance. The excellent tracking of the resistors results in a differential

nonlinearity tempco of ±2ppm/°C maximum. The temperature coeffi cient of gain

is±20ppm/°C maximum, and the tempco of zero is ±5ppm/°C maximum.

DATEL Innovation & Excellence

DATEL | 120 Forbes Blvd., Suite 125 Mansfield, MA 02048 | Phone: +1-508-964-5131 | www.datel.com

© DATEL is a registered trademark of DATEL, Inc.

4/17/2019 | Page 1 of 1