STM32MP157C datasheet(136/260 Pages) STMICROELECTRONICS

Teilenummer	STM32MP157C

Bauteilbeschribung	Arm® dual Cortex®-A7 800 MHz Cortex®-M4 MPU, 3D GPU, TFT/DSI, 37 comm. interfaces, 29 timers, adv. analog, crypto

PDF	260 Pages

Scroll/Zoom	100%

Hersteller	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

136 / 260 page

Electrical characteristics

STM32MP157C/F

136/260

DS12505 Rev 5

6.3.6

Supply current characteristics

The current consumption is a function of several parameters and factors such as the

operating voltage, ambient temperature, I/O pin loading, device software configuration,

operating frequencies, I/O pin switching rate, program location in memory and executed

binary code.

The current consumption is measured as described in Figure 12: Current consumption

measurement scheme.

All the Run mode current consumption measurements given in this section are performed

with a CoreMark code unless otherwise specified.

Typical and maximum current consumption

The device is placed under the following conditions:

•

All I/O pins are in analog input mode except when explicitly mentioned.

•

All peripherals are disabled except when explicitly mentioned.

•

The maximum values are obtained for VDD/VBAT = 3.6 V and VDDCORE = 1.25 V, and

the typical values for VDD/VBAT = 3.3 V and VDDCORE = 1.2 V unless otherwise

specified.

The parameters given in Table 22 to Table 26 are derived from tests performed under

supply voltage conditions summarized in Table 13: General operating conditions.

3. Load is for internal STM32MP157C/F analog blocks, no additional external load is accepted unless mentioned.

STM32MP157C Datenblatt(PDF) 136 Page - STMicroelectronics