ST7265X datasheet(104/166 Pages) STMICROELECTRONICS

Teilenummer	ST7265X

Bauteilbeschribung	LOW-POWER, FULL-SPEED USB 8-BIT MCU WITH 32K FLASH, 5K RAM, FLASH CARD I/F, TIMER, PWM, ADC, I2C, SPI

PDF	166 Pages

Scroll/Zoom	100%

Hersteller	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

104 / 166 page

ST7265x

104/166

SERIAL PERIPHERAL INTERFACE (Cont’d)

11.6.5.4 Single Master System

A typical single master system may be configured,

using an MCU as the master and four MCUs as

slaves (see Figure 65).

The master device selects the individual slave de-

vices by using four pins of a parallel port to control

the four SS pins of the slave devices.

The SS pins are pulled high during reset since the

master device ports will be forced to be inputs at

that time, thus disabling the slave devices.

Note: To prevent a bus conflict on the MISO line

the master allows only one active slave device

during a transmission.

For more security, the slave device may respond

to the master with the received data byte. Then the

master will receive the previous byte back from the

slave device if all MISO and MOSI pins are con-

nected and the slave has not written to its SPIDR

Other transmission security methods can use

ports for handshake lines or data bytes with com-

mand fields.

Figure 65. Single Master / Multiple Slave Configuration

MISO

MOSI

MISO

SCK

Slave

MCU

Slave

MCU

Slave

MCU

Slave

MCU

Master

MCU

ST7265X Datenblatt(PDF) 104 Page - STMicroelectronics