`

Copyright © 2010 Future Technology Devices International Limited

3

Document Reference No.: FT_000254

VNC2 Debug Module Datasheet Version 1.1

Clearance No.: FTDI# 149

2 Applications

Enable firmware programming of VNC2 devices on V2DIPx-x development modules and custom

VNC2 based hardware.

Debug firmware code running on a VNC2 device.

2.1 Features

:

One USB ‘miniB’ type socket to connect with a

PC.

Onboard FTDI FT232R which provides

conversion from USB to serial interface for

VNC2 debug port.

Low USB bandwidth consumption.

USB2.0 Full Speed compatible.

UHCI/OHCI/EHCI host controller compatible.

5V Power output to V2DIP-x module (if

needed).

USB powered.

Programming and debugging for VNC2 IC

designs.

Power and traffic indicator LEDs

6 way, keyed connector to support FTDI’s

range of V2DIPx-x development modules.

VNC2 debug module is a Pb-free, RoHS

complaint development module.

-40

℃ to +85℃ operating temperature range.

2.2 Software Drivers

USB drivers for the FT232R device, featured on the VNC2 debug module, are available from

http://www.ftdichip.com.

2.3 Part Number

The part number for the board is- VNC2 DEBUG MODULE