Z/A/X/DZ Common Accessories

177

Z/A/X/DZ

Common Accessories

Ordering Information

■ Terminal Covers (Sold Separately)

Common to Z, A, X, and DZ Models

The Terminal Cover is secured using the switch’s side mounting screws and protects the casing and terminal wires from dust, vibration, or fingers,

thus preventing terminal short-circuiting, ground faults, wire disconnection or improper connection, and electric shock accidents.

Terminal Covers made of phenol resin have five or six thin wall sections.

These sections can be torn open to provide holes for lead cables at desired points.

Note: Use the ‘Screw-terminal use’ Terminal Cover for DZ-series solder terminal models.

Common to Z, A, X, and DZ Models

Model: Separator for Z

Common to Z and X Models

Pin Plunger Switches might need to be actuated by a cam or similar object, in which case, use one of the following Actuators according to the application.

Note: ZAQ-22 is constructed of ferrous material. Therefore, it cannot be used with the X Switch, because of the permanent magnet contained

within those models. Use the ZAQ-22 external panel mount roller plunger only with the Z or DZ switch.

Application

Soldering terminal use

Screw terminal use

Remarks

Material

Mounting direction

Model

Phenol resin

Side mounting

AP-A

AP-B

---

Metal press mold

Side mounting

AP1-A

AP1-B

Used for AP-A and AP-B

Vinyl chloride

Side mounting

AP-Z

---

Actuator

Common to Z and X models

ZAA-1

ZAA-2

Short

ZAQ-3

Medium

ZAQ-2

Long

ZAQ-1

ZAQ-22

Hinge lever

Hinge roller lever

Panel mount plunger

Panel mount roller plunger