40

DC Line Filters VOL.10

●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.

●Please request for a specification sheet for detailed product data prior to the purchase.

●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.

9634DCLVOL10E1106E2

SMD Type

230

210

150

80 to 120 sec.

25 sec. max.

TEMP. (˚C)

Precautions

Shelf Life

Use within 6 months. If the product is used after a

storage period of 6 months or longer, confirm its

solderability before use.

Recommended Soldering Conditions

• Soldering irons:

Tip temperature: 350±5˚C

Duration of heat: approx. 4 seconds

• Flow soldering: not suitable

• Reflow soldering: Refer to the following

temperature profile.

• Standard thickness of cream Solder = 150μm ~

200μm.

Recommended reflow profile shown below are data

obtained from reflow equipment used at NEC TOKIN.

The Solderbility may differ greatly depending on

reflow equipment type, reflow condition, land

pattern area and the amount of cream Solder.

Please check the Solderbility thoroughly before

actual reflow operation.

250

230

150

90

30 Max.

TIME(sec)

TEMP. (˚C)

Reflow Profile 1 (for SBP-5001T)

Reflow Profile 2 (for lead-free type)