SPECIFICATION CONTROL DRAWING

Tyco Electronics Corporation

300 Constitution Drive,

Menlo Park, CA. 94025, U.S.A.

Raychem

TITLE:

COAXIAL SOLDERSLEEVE DEVICE

WITH PRE-INSTALLED LEAD

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.

INCHES DIMENSIONS ARE BETWEEN BRACKETS.

DOCUMENT NO

.:

D-181-32XX-90/9

TOLERANCES:

0.00 N/A

0.0 N/A

0 N/A

ANGLES: N/A

ROUGHNESS IN

MICRON

Tyco Electronics reserves the right to amend

this drawing at any time. Users should

evaluate the suitability of the product for their

application.

DATE:

Jun. 23, 1998

DOC ISSUE:

3

DRAWN BY:

M. FORONDA

CAGE CODE:

06090

REPLACES:

D18132XX

DCR NUMBER:

D981031

PROD. REV.:

SEE TABLE

SCALE:

None

SIZE:

A

SHEET:

1 of 1

If this document is printed it becomes uncontrolled. Check for the latest revision.

© 2004 Tyco Electronics Corporation. All rights reserved

MATERIALS

1. INSULATION SLEEVES: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.

2. SOLDER PREFORMS WITH FLUX:

SOLDER:

TYPE Sn63 per ANSI-J-STD-006.

FLUX:

TYPE ROL1 per ANSI-J-STD-004.

3. MELTABLE RINGS: Thermally stabilized thermoplastic. Color: gray.

4. GROUND LEAD: Raychem 55A0111-XY in accordance with MIL-W-22759/32, AWG XY (see table), stranded tin plated.

Color: white.

5. GROUND LEAD: Raychem 55A0111-XY in accordance with MIL-W-22759/32, AWG XY (see table), stranded tin plated.

Color: white with black strip.

APPLICATION

1. These parts are designed to provide an environment protected coaxial termination on cables, rated for 125

°C minimum, meeting the

dimensional criteria listed, and having a tin or silverplated shields.

2. Temperature range: -55

°C to +150°C. Install using Raychem-approved convection or infrared heating tools in accordance with

Raychem process standard RCPS-200-36.

For best results, prepare the cable as shown:

SolderSleeve is a trademark of Tyco Electronics Corporation.

‘XY’ = WIRE GAUGE (AWG)

Product Revision

Product Dimensions

Product Name

øA

min

øB

min

øC

min

øD

min

øE

min

øF

min

L1

max

L2

max

K

min

AWG

D-181-3220-90/9

F

20

D-181-3222-90/9

F

5.20

4.70

4.45

3.95

4.00

1.30

17.00

21.5

150

22

D-181-3224-90/9

F

(0.205)

(0.185)

(0.175)

(0.155)

(0.160)

(0.055)

(0.670)

(0.850)

(5.900)

24

D-181-3226-90/9

F

26