STM32F103RG datasheet(118/120 Pages) STMICROELECTRONICS

118 / 120 page

Revision history

STM32F103xF, STM32F103xG

118/120

Doc ID 16554 Rev 3

Revision history

Table 74.

Document revision history

Date

Revision

Changes

27-Oct-2009

Initial release.

15-Nov-2010

LQFP64 package mechanical data updated: see Figure 66: LQFP64 –

10 x 10 mm 64 pin low-profile quad flat package outline and Table 71:

LQFP64 – 10 x 10 mm 64 pin low-profile quad flat package mechanical

data.

Internal code removed from Table 73: STM32F103xF and

STM32F103xG ordering information scheme.

Updated note 2 below Table 54: I2C characteristics

Updated Figure 46: I2C bus AC waveforms and measurement circuit

Updated Figure 45: Recommended NRST pin protection

Updated note 1 below Table 49: I/O static characteristics

Updated Table 20: Peripheral current consumption

Updated Table 14: Maximum current consumption in Run mode, code

with data processing running from Flash

Updated Table 15: Maximum current consumption in Run mode, code

with data processing running from RAM

Updated Table 16: Maximum current consumption in Sleep mode, code

running from Flash or RAM

Updated Table 17: Typical and maximum current consumptions in Stop

and Standby modes

Updated Table 18: Typical current consumption in Run mode, code with

data processing running from Flash

Updated Table 19: Typical current consumption in Sleep mode, code

running from Flash or RAM

Updated Table 24: LSE oscillator characteristics (fLSE = 32.768 kHz)

Updated Figure 22: Asynchronous non-multiplexed

SRAM/PSRAM/NOR read waveforms on page 62

Added Section 5.3.13: I/O current injection characteristics on page 83

18-Jan-2012

Section 2.3.26: GPIOs (general-purpose inputs/outputs): modified text

of last sentence.

Table 5: STM32F103xF and STM32F103xG pin definitions: updated

pins PD0, PD1, OSC_IN, OSC_OUT, PB8, PB9, and PF8.

Table 7: Voltage characteristics: Removed the previous footnotes 2 and

3 and added current footnote 2.

Table 8: Current characteristics: updated footnotes 3, 4, and 5.

Table 21: High-speed external user clock characteristics: replaced the

tw(HSE) min value by 5 (instead of 16).

Table 24: LSE oscillator characteristics (fLSE = 32.768 kHz): updated

symbols and footnotes.

STM32F103RG Datenblatt(PDF) 118 Page - STMicroelectronics

STM32F103RG Datenblatt(HTML) 118 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datenblatt Download

Link URL