114- 1056

Rev D

2

of 7

2. REFERENCE MATERIAL

2.1. Revision Summary

Revisions to this application specification include:

S

Changed company logo

2.2. Customer Assistance

Reference Product Base Part Number 435802 and Product Code 4546 are representative of DIP programming

switches (7000 and 7100 Series). Use of these numbers will identify the product line and expedite your

inquiries through a service network established to help you obtain product and tooling information. Such

information can be obtained through a local Representative or, after purchase, by calling PRODUCT

INFORMATION at the number at the bottom of page 1.

2.3. Drawings

Customer Drawings for product part numbers are available from the service network. If there is a conflict

between the information contained in the Customer Drawings and this specification or with any other technical

documentation supplied, the information contained in the Customer Drawings takes priority.

2.4. Specifications

Product Specifications 108--7519 (7000 series) and 108--7532 (7100 series) provide product performance and

test information.

Qualification Test Reports 501--135 (7000 series) and 501--128 (7100 series) provide an independent corporate

test report to show the switch conforms to the above mentioned Product Specifications.

2.5. Instructional Material

Instruction Sheets (408--series) provide product assembly instructions or tooling setup and operation

procedures and Customer Manuals (409--series) provide machine setup and operating procedures.

Documents available which pertain to this product are:

408--7779

Dual In--Line Package (DIP) Programming Switches (7000 and 7100 Series)

2.6. Manuals

Manual 402--40 can be used as a guide to soldering. This manual provides information on various flux types

and characteristics with the commercial designation, flux removal procedures, and a guide for information on

soldering problems.

3. REQUIREMENTS

3.1. Safety

Do not stack product shipping containers so high that the containers buckle or deform.

3.2. Limitations

The switches are designed to operate within a temperature range of --55_ to 105_C[--67_ to 221_F].

3.3. Storage

A. Ultraviolet Light

Prolonged exposure to ultraviolet light may deteriorate the chemical composition of components used in

the switches.

B. Shelf Life

The switches should remain in the shipping containers until ready for use to prevent damage. These

products should be used on a first in, first out basis to avoid storage contamination.