114- 1056

Rev D

7

of 7

6. VISUAL AID

Figure 8 shows a typical application of DIP programming switches. This illustration should be used by

production personnel to ensure a correctly applied product. Applications which DO NOT appear correct should

be inspected using the information in the preceding pages of this specification and in the instructional material

shipped with the product or tooling.

FIGURE 8. VISUAL AID

THEREMUSTBENO

CRACKS IN SOLDER

SWITCH MUST BE VISUALLY

BOTTOMED ON PC BOARD

SWITCH MUST BE

BOTTOMED ON

SOCKET

SOLDERED SWITCH

SWITCH HOUSINGS MUST NOT

BE DAMAGED IN ANY WAY

REMOVABLE SWITCH