Z Series

Surface Mount Bandpass Filter

True surface mounting for uniformity with other system

components.

Standard Parameters

Special Parameters

Comments

Frequency Range

70 to 1000 MHz

30 to 1500 MHz

Percentage

Bandwidth

1 to 100%

0.5 to 200%

Maximum VSWR

1.5:1

1.2:1

Average Input

Power

1 Watt

Up to 5 Watts

Measured up to 10,000 feet

Phase Linearity

± 5°

± 2°

Phase Matching

± 2°

± 1°

Maximum

Attenuation

Up to 50 dBc

Up to 65 dBc

Topology

Chebychev

*Consult Factory

Nominal

Impedance

50 Ohms

**Consult Factory

Number of

Sections

3

5

Shock

5 G's

Up to 500 G's

See Below

Vibration

5 G's

Up to 500 G's

See Below

Humidity

90%, non-condensing

Up to 100%, non-condensing

See Below

Alititude

Unlimited

Unlimited

See Below

Operating

Temperature

0 to +50 °Celsius

-55 to +125 °Celsius

See Below

Storage

Temperature

-55 to +85 °Celsius

-65 to +150 °Celsius

See Below

Gross Leak

As required

As required

Additional testing charges will apply

Fine Leak

As required

As required

Additional testing charges will apply

Moisure

Resistance

100%

100%

Other parameters may be specified. Please consult factory for any deviation from standard.

*Other topologies are available upon requrest or design need. Tese can include, but are not limited to:

Gaussian, Butterworth, Bessel, Elliptical, and Pole-placed designs.

Overview

**Other impedances can be achieved, but the package is designed as a 50 Ohm unit. Matching to any other impedance will need prior approval and may not be

guaranteed.

Any environmental testing will incure additional charges. Consult factory for costs associated with environmental testing. All filters can be "Designed to" and may not

require the additional testing. Each application will be different.

http://www.mtronpti.com/products/Filter/Bandpass/y-series-surface-mount-bandpass