1--21000--8 datasheet(2/4 Pages) TEC

Teilenummer	1--21000--8

Bauteilbeschribung	Base Assembly Universal

Download	4 Pages

Scroll/Zoom	100%

Hersteller	TEC [TE Connectivity Ltd]

Direct Link	http://www.te.com/usa-en/home.html

Logo

2 / 4 page

408- 9875

Rev A

2

of 4

ribbon cable in position. The cable stop provides

proper positioning of the ribbon cable for flush

terminations.

3. INSTALLATION OF BASE ASSEMBLY UNIVERSAL

ARBOR TOOL (Figure 1)

The procedures in this section are typical for both

the Manual Arbor Frame Assembly and the

Pneumatic Auto--Cycle Unit.

Before installing the universal arbor tool in the

Pneumatic Auto--Cycle Unit, DISCONNECT air

from main air valve.

1. Secure upper tool mount to ram with the two

socket head cap screws.

The slot on the upper tool mount must face

toward the FRONT of the frame assembly, as

shown in Figure 1.

2. Remove tool stop from the front of the slide

base.

3. Position lower tooling assembly onto slide base

of frame assembly and slide into position.

4. Replace tool stop and tighten it to secure the

lower tooling assembly onto the slide base.

4. TERMINATION PROCEDURE

1. Install the connector--specific kit onto the

universal arbor tool; then set up the tooling

components for termination. Refer to the

instruction sheet supplied with the

connector--specific kit. See Figure 2.

Figure 2

NOTE:

GUARD REMOVED FOR CLARITY

MANUAL ARBOR

FRAME ASSEMBLY

(Ref)

RAM

REAR TOOL

STOP

CABLE

GUIDES

CABLE POSITIONED IN FLUTES

OF FLUTED PLATE AND

BETWEEN CABLE GUIDES

CABLE CLAMP

CLOSED

LOWER

INSERT

CABLE

STOP

(Ref)

LOCATORS

AMPLIMITE PLUG

CONNECTOR

UPPER

TOOL

UPPER TOOL

MOUNT

(Ref)

TOOL HANDLE

NOTE

i

DANGER

NOTE

i

Ähnliche Beschreibung - 1--21000--8

Hersteller	Teilenummer	Datenblatt	Bauteilbeschribung
Tyco Electronics	2213730-1	653Kb / 3P	BASE ASSEMBLY, LIGHT CONTROLLER
Tyco Electronics	6489700-1	161Kb / 1P	HEADER ASSEMBLY, UNIVERSAL, AMP LATCH
Schneider Electric	HMIG5U2	172Kb / 4P	Base unit, Harmony GTU, Open BOX for Universal Panel Sep 13, 2021
	HMIG2U	145Kb / 4P	Base unit, Harmony GTU, Standard Box for Universal Panel Apr 27, 2022
	HMIG3UFC	136Kb / 4P	Base unit, Harmony GTU, Premium BOX for Universal Panel Sep 20, 2021
rfsolutions.ltd	INTRO	694Kb / 4P	Universal RFID base board with RS232 and optional USB interface.
Taoglas antenna solutio...	CAB.X05	524Kb / 7P	taoglas magnet mount antenna base cable assembly
	CAB.X06	527Kb / 7P	taoglas magnet mount antenna base cable assembly
	CAB.X04	496Kb / 7P	taoglas magnet mount antenna base cable assembly
	CAB.X07	531Kb / 7P	taoglas magnet mount antenna base cable assembly

More results

1--21000--8 Datenblatt(PDF) 2 Page - TE Connectivity Ltd

1--21000--8 Datenblatt(HTML) 2 Page - TE Connectivity Ltd

Ähnliche Teilenummer - 1--21000--8

Ähnliche Beschreibung - 1--21000--8

Html Pages

1 2 3 4

Datenblatt Download

Link URL