STM32L476RG datasheet(103/232 Pages) STMICROELECTRONICS

Teilenummer	STM32L476RG

Bauteilbeschribung	Ultra-low-power ARM® Cortex®-M4 32-bit MCUFPU, 100DMIPS, up to 1MB Flash, 128 KB SRAM, USB OTG FS, LCD, analog, audio

PDF	232 Pages

Scroll/Zoom	100%

Hersteller	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

103 / 232 page

DocID025976 Rev 4

103/232

STM32L476xx

Electrical characteristics

207

6.3.5

Supply current characteristics

The current consumption is a function of several parameters and factors such as the

operating voltage, ambient temperature, I/O pin loading, device software configuration,

operating frequencies, I/O pin switching rate, program location in memory and executed

binary code.

The current consumption is measured as described in Figure 14: Current consumption

measurement scheme.

Typical and maximum current consumption

The MCU is placed under the following conditions:

•

All I/O pins are in analog input mode

•

All peripherals are disabled except when explicitly mentioned

•

The Flash memory access time is adjusted with the minimum wait states number,

depending on the fHCLK frequency (refer to the table “Number of wait states according

to CPU clock (HCLK) frequency” available in the RM0351 reference manual).

•

When the peripherals are enabled fPCLK = fHCLK

The parameters given in Table 26 to Table 39 are derived from tests performed under

ambient temperature and supply voltage conditions summarized in Table 22: General

operating conditions.

STM32L476RG Datenblatt(PDF) 103 Page - STMicroelectronics