9

LM741-MIL

www.ti.com

SNOSD62 – JUNE 2017

Product Folder Links: LM741-MIL

Submit Documentation Feedback

Copyright © 2017, Texas Instruments Incorporated

Typical Application (continued)

Figure 2. Waveforms for LM741-MIL Non-inverting Amplifier Circuit

9 Power Supply Recommendations

For proper operation, the power supplies must be properly decoupled. For decoupling the supply lines, a 0.1-µF

capacitor is recommended and should be placed as close as possible to the LM741-MIL power supply pins.

10 Layout

10.1 Layout Guidelines

As with most amplifiers, take care with lead dress, component placement, and supply decoupling in order to

ensure stability. For example, resistors from the output to an input should be placed with the body close to the

input to minimize pick-up and maximize the frequency of the feedback pole by minimizing the capacitance from

the input to ground. As shown in Figure 3, the feedback resistors and the decoupling capacitors are located close

to the device to ensure maximum stability and noise performance of the system.

10.2 Layout Example

Figure 3. LM741-MIL Layout