02013J8R2ABSTR
AI

## Electronic Component Analysis: 02013J8R2ABSTR
The part number **02013J8R2ABSTR** corresponds to a high-precision, thin-film Surface Mount Device (SMD) capacitor manufactured by **KYOCERA AVX**. This specific series (Accu-P®) is designed for high-frequency applications where stability and low loss are critical.
---
### 1. Part Number Breakdown
To understand the specifications, we can decode the alphanumeric string based on the AVX Accu-P nomenclature:
| Segment | Code | Meaning |
| :--- | :--- | :--- |
| **Case Size** | `0201` | 0.02" x 0.01" (0.6mm x 0.3mm) |
| **Voltage** | `3` | 25 Volts |
| **Dielectric** | `J` | Silicon Dioxide / Silicon Nitride (Accu-P series) |
| **Capacitance** | `8R2` | 8.2 picoFarads (pF) |
| **Tolerance** | `A` | ±0.05 pF (Ultra-tight tolerance) |
| **Failure Rate** | `B` | Standard (Not applicable to all series) |
| **Termination** | `ST` | Sn100 (Lead-Free, Tin plated) |
| **Packaging** | `R` | 7" Reel (Taped and Reeled) |
---
### 2. Key Technical Specifications
This component is highly specialized for RF (Radio Frequency) circuits.
* **Capacitance:** 8.2 pF
* **Tolerance:** ±0.05 pF (Extremely precise)
* **Rated Voltage:** 25 VDC
* **Operating Temperature:** -55°C to +125°C
* **Technology:** Thin-Film (provides better performance than standard Multilayer Ceramic Capacitors/MLCC at high frequencies).
* **Q-Factor:** Very high (Low ESR/low losses at GHz frequencies).
---
### 3. Typical Applications
Due to its 0201 miniature size and high stability, this part is commonly used in:
1. **Mobile Communications:** Smartphones, 5G base stations, and IoT devices.
2. **RF Matching Networks:** Impedance matching for antennas to ensure maximum power transfer.
3. **VCOs:** Voltage Controlled Oscillators where frequency stability is paramount.
4. **Filters:** Low-pass and high-pass filters in satellite and microwave communication.
---
### 4. Comparison: Thin-Film vs. Standard MLCC
| Feature | Accu-P (Thin-Film) | Standard MLCC (Class 1) |
| :--- | :--- | :--- |
| **Tolerance** | Down to ±0.01 pF | Usually ±5% or 0.1 pF |
| **SRF** | Very High | Moderate |
| **Aging** | Negligible | Small |
| **Best Use** | RF/Microwave (>1 GHz) | General Decoupling/Lower RF |
- ⤷
What are the soldering precautions for 0201 sized components to avoid 'tombstoning'?
- ⤷ How does the Q-factor of this capacitor affect signal integrity in RF circuits?
- ⤷ Can this capacitor be substituted with a standard C0G/NP0 ceramic capacitor in high-frequency designs?