ADM3064EARZ-R7
AI

## ADM3064EARZ-R7: Technical Overview
The **ADM3064EARZ-R7** is a high-performance RS-485 transceiver manufactured by Analog Devices. It is designed for high-speed, bidirectional data communication on multipoint bus transmission lines.
### 1. Core Specifications
The following table highlights the primary electrical and physical characteristics of the component:
| Feature | Specification |
| :--- | :--- |
| **Data Rate** | Up to 50 Mbps |
| **Supply Voltage (Vcc)** | 3.0 V to 5.5 V |
| **Communication Protocol** | RS-485 / RS-422 |
| **Duplex** | Full Duplex |
| **Number of Drivers/Receivers** | 1 Driver / 1 Receiver |
| **Operating Temperature** | -40°C to +125°C |
| **Package / Case** | 8-SOIC (0.154", 3.90mm Width) |
| **ESD Protection** | ±12 kV (Contact), ±15 kV (Air Gap) |
---
### 2. Key Electronic Features
#### A. High Speed & Low Latency
Unlike standard RS-485 transceivers that operate at 1–10 Mbps, the ADM3064 supports up to **50 Mbps**. This makes it suitable for high-speed motor control and industrial automation where timing is critical.
#### B. Enhanced Robustness
* **IEC ESD Protection:** It features high-level Integrated Electrostatic Discharge (ESD) protection on the bus pins, reducing the need for external TVS diodes.
* **VCC Undervoltage Lockout (UVLO):** Prevents the device from transmitting erroneous data if the power supply falls below a functional level.
#### C. Receiver Fail-Safe
The device includes a **True Fail-Safe** feature. This ensures that the receiver output (RO) remains in a logic high state if:
1. The inputs are open-circuited.
2. The inputs are short-circuited.
3. The bus is idle (terminated but not driven).
---
### 3. Pin Configuration (8-SOIC)
| Pin No. | Mnemonic | Description |
| :--- | :--- | :--- |
| 1 | **RO** | Receiver Output |
| 2 | **RE** | Receiver Enable (Active Low) |
| 3 | **DE** | Driver Enable (Active High) |
| 4 | **DI** | Driver Input |
| 5 | **GND** | Ground Connection |
| 6 | **A/Y** | Non-inverting Driver Output / Receiver Input |
| 7 | **B/Z** | Inverting Driver Output / Receiver Input |
| 8 | **Vcc** | Power Supply (3.3V or 5V) |
---
### 4. Typical Applications
* **Industrial Fieldbus:** Profibus, Modbus, and BACnet over high-speed links.
* **Motor Control:** Encoder feedback systems (e.g., EnDat 2.2 or BiSS).
* **Process Control:** High-speed data acquisition in noisy electrical environments.
- ⤷
What is the difference between the ADM3064 and the half-duplex ADM3061?
- ⤷ How does the 'R7' suffix affect the ordering/packaging of this part?
- ⤷ What are the recommended values for the decoupling capacitors on the Vcc pin?