AI

The **U74LVC06AL-P14-R** is a specific integrated circuit (IC) belonging to the Low-Voltage CMOS (LVC) family. It is primarily used for signal buffering and voltage level translation.
---
### 1. General Overview
The U74LVC06A consists of **six independent inverting buffers** with open-drain outputs. Because it has open-drain outputs, it requires external pull-up resistors to function as a standard logic inverter.
| Feature | Specification |
| :--- | :--- |
| **Logic Type** | Inverter (Open Drain) |
| **Number of Circuits** | 6 (Hex) |
| **Voltage Supply (Vcc)** | 1.2V to 3.6V |
| **Package Type** | TSSOP-14 (indicated by P14) |
| **Operating Temperature** | -40°C to +125°C |
### 2. Key Characteristics
* **Open-Drain Outputs:** The outputs can be connected to voltages higher than the $V_{CC}$ of the chip (up to 5.5V), making it excellent for **Level Shifting**.
* **Low Power Consumption:** Designed for battery-operated or energy-efficient electronics.
* **5V Tolerant Inputs:** The inputs can handle up to 5.5V even when the supply voltage is lower (e.g., 3.3V).
* **High Drive Capability:** Can sink up to 24mA of current at 3.3V.
### 3. Pin Configuration (TSSOP-14)
The device follows a standard Hex Inverter pinout layout:
| Pin Number | Function | Description |
| :--- | :--- | :--- |
| 1, 3, 5, 9, 11, 13 | 1A to 6A | Data Inputs |
| 2, 4, 6, 8, 10, 12 | 1Y to 6Y | Data Outputs (Open-Drain) |
| 7 | GND | Ground |
| 14 | $V_{CC}$ | Positive Supply |
---
### 4. Part Number Breakdown
The suffixing follows UTC (Unisonic Technologies Co.) naming conventions:
* **U74LVC**: Logic Family (Low Voltage CMOS).
* **06**: Logic Function (Hex Inverter with Open-Drain).
* **A**: Revision/Advanced version.
* **L**: Lead-free/RoHS compliant.
* **P14**: TSSOP-14 Package.
* **R**: Taping/Reel packaging.
### 5. Common Applications
1. **Level Translation:** Converting 1.8V or 3.3V logic signals to 5V logic.
2. **Wired-OR Gates:** Connecting multiple open-drain outputs together to a single pull-up resistor.
3. **LED Drivers:** Sinking current to turn on LEDs.
4. **Bus Interfacing:** Isolating different parts of a circuit.
---
- ⤷What is the maximum output voltage supported by the open-drain pins?
- ⤷ How do I calculate the pull-up resistor value for this IC?
- ⤷ Can this IC be used to interface a 3.3V MCU with a 5V sensor?