X-6AA-R
AI

The **X-6AA-R** is a standard electronic component housing, specifically a **6-cell AA battery holder**. This part is designed to hold six AA batteries in series, typically used to provide a 9V power source (6 batteries x 1.5V) for portable electronic devices.
Below is a detailed breakdown of its specifications and physical characteristics.
---
### Technical Specifications
| Feature | Description |
| :--- | :--- |
| **Battery Type** | AA (R6, LR6) |
| **Cell Count** | 6 Batteries |
| **Nominal Voltage** | 9.0V (Alkaline) / 7.2V (Rechargeable NiMH) |
| **Connection Type** | Wire Leads (usually 150mm - 200mm length) |
| **Orientation** | 2 Rows of 3 (Back-to-back or Side-by-side) |
| **Material** | High-impact ABS Plastic |
| **Contact Material** | Nickel-plated Steel Springs / Brass |
---
### Key Electronic Components
The "parts" of the X-6AA-R assembly include:
1. **Chassis/Housing:** A molded plastic frame that keeps cells aligned and prevents short-circuiting between rows.
2. **Coil Springs:** Located at the negative (-) terminal, these provide mechanical tension to ensure a firm electrical connection and accommodate slight variations in battery length.
3. **Pressure Plates:** Located at the positive (+) terminal, these are flat metal contacts.
4. **Internal Bus Bars:** Small metal strips that connect the cells in **series**. The positive of one cell is linked to the negative of the next to sum the voltage.
5. **Output Leads:**
* **Red Wire:** Positive (+) terminal.
* **Black Wire:** Negative (-) terminal (Ground).
---
### Common Applications
* **Robotics:** Powering microcontrollers (Arduino/ESP32) via a voltage regulator.
* **Handheld Devices:** Radios, flashlights, and portable test equipment.
* **Toys:** Remote-controlled vehicles and electronic learning kits.
* **DIY Projects:** Providing a high-capacity 9V source compared to standard 9V rectangular batteries.
---
### Comparison: 6-AA Holder vs. Standard 9V Battery
| Feature | 6 x AA Holder (X-6AA-R) | Standard 9V (PP3) |
| :--- | :--- | :--- |
| **Capacity** | ~2500 mAh | ~500 mAh |
| **Current Output** | High (Good for motors) | Low (Good for sensors) |
| **Physical Size** | Large | Compact |
- ⤷
What is the maximum current draw recommended for this battery holder?
- ⤷ How can I calculate the total runtime for a device using the X-6AA-R?
- ⤷ Are there versions of this holder with a built-in ON/OFF switch?