GENERAL DESCRIPTION
The AD4030-24/AD4032-24 are 2 MSPS or 500 kSPS successive
approximation register (SAR), analog-to-digital converters (ADC)
with Easy Drive™. With a guaranteed maximum ±0.9 ppm integral
nonlinearity (INL) and no missing codes at 24-bits, the AD4030-24/
AD4032-24 achieve unparalleled precision from −40°C to +125°C.
Figure 1 shows the functional architecture of the AD4030-24/
AD4032-24.
A low drift, internal precision reference buffer eases voltage
reference sharing with other system circuitry. The AD4030-24/
AD4032-24 offer a typical dynamic range of 109 dB when using
a 5 V reference. The low noise floor enables signal chains requiring
less gain and lower power. A block averaging filter with programmable
decimation ratio can increase dynamic range up to 155.5 dB.
The wide differential input and common mode ranges allow inputs
to use the full ±VREF range without saturating, simplifying signal
conditioning requirements and system calibration. The improved
settling of the Easy Drive analog inputs broadens the selection
of analog front-end components compatible with the AD4030-24/
AD4032-24. Both single-ended and differential signals are supported.
The versatile Flexi-SPI serial peripheral interface (SPI) eases host
processor and ADC integration. A wide data clocking window, multiple
SDO lanes, and optional dual data rate (DDR) data clocking can
reduce the serial clock to 10 MHz while operating at a sample rate
of 2 MSPS or 500 kSPS. Echo clock mode and ADC host clock
mode relax the timing requirements and simplify the use of digital
isolators.
The 7 mm × 7 mm, 64-Ball CSP_BGA package of the AD4030-24/
AD4032-24 integrates all critical power supply and reference bypass
capacitors, reducing the footprint and system component
count, and lessening sensitivity to board layout.

FEATURES
► High performance
► Throughput: 2 MSPS (AD4030-24) or 500 kSPS (AD4032-24)
options
► INL: ±0.9 ppm maximum from −40°C to +125°C
► SNR: 108.4 dB typical
► THD: −127 dB typical
► NSD: −169 dBFS/Hz typical
► Low power
► 30 mW at 2 MSPS
► 10 mW at 500 kSPS
► 3 mW at 10 kSPS
► Easy Drive™ features reduce system complexity
► Low 1.2 μA input current for dc inputs at 2 MSPS
► Wide common-mode input range: −(1/128) × VREF to
+(129/128) × VREF
► Flexible external reference voltage range: 4.096 V to 5 V
► Accurate integrated reference buffer with 2 μF bypass
capacitor
► Programmable block averaging filter with up to 216 decimation
► Extended sample resolution to 30 bits
► Overrange and synchronization bits
► Flexi-SPI digital interface
► 1, 2, or 4 SDO lanes allows slower SCK
► Echo clock mode simplifies use of digital isolator
► Compatible with 1.2 V to 1.8 V logic
► 7 mm × 7 mm, 64-Ball CSP_BGA package with internal supply
and reference capacitors to help reduce system footprint

APPLICATIONS
► Automatic test equipment
► Digital control loops
► Medical instrumentation
► Seismology
► Semiconductor manufacturing
► Scientific instrumentation