[QuickLogic]

PRODUCT SUMMARY
The QuickRAM family of ESPs (Embedded Standard Products) offers FPGA logic in combination with Dual-Port SRAM modules. QuickRAM is a 90,000 usable PLD gate ESPs. QuickRAM ESPs are fabricated on a 0.35mm four-layer metal process using QuickLogic’s patented ViaLink technology to provide a unique combination of high performance, high density, low cost, and extreme ease-of-use.

DEVICE HIGHLIGHTS
High Performance and High Density
■ Up to 90,000 Usable PLD Gates with 316 I/Os
■ 300 MHz 16-bit Counters, 400 MHz Datapaths, 160+ MHz FIFOs
■ 0.35um four-layer metal non-volatile CMOS process for smallest die sizes

High Speed Embedded SRAM
■ Up to 22 dual-port RAM modules, organized in userconfigurable 1,152-bit blocks
■ 5ns access times, each port independently accessible
■ Fast and efficient for FIFO, RAM, and ROM functions

Easy to Use / Fast Development Cycles
■ 100% routable with 100% utilization and complete pin-out stability
■ Variable-grain logic cells provide high performance and 100% utilization
■ Comprehensive design tools include high quality Verilog/ VHDL synthesis

Advanced I/O Capabilities
■ Interfaces with both 3.3 volt and 5.0 volt devices
■ PCI compliant with 3.3V and 5.0V buses for -1/-2 speed grades
■ Full JTAG boundary scan
■ Registered I/O cells with individually controlled clocks and output enables

FEATURES

Total of 316 I/O pins
■ 308 bi-directional input/output pins, PCI-compliant for 5.0 volt and 3.3 volt buses for -1/-2/-3/-4 speed grades
■ 8 high-drive input/distributed network pins

Eight Low-Skew Distributed Networks
■ Two array clock/control networks available to the logic cell flip-flop clock, set and reset inputs - each driven by an input-only pin
■ Six global clock/control networks available to the logic cell F1, clock, set and reset inputs and the input and I/O register clock, reset and enable inputs as well as the output enable control - each driven by an input-only or I/O pin, or any logic cell output or I/O cell feedback

High Performance
■ Input + logic cell + output total delays under 6 ns
■ Data path speeds exceeding 400 MHz
■ Counter speeds over 300 MHz
■ FIFO speeds over 160+ MHz

Military Reliability
■ Mil-STD-883 and Miil Temp Ceramic
■ Mil Temp Plastic - Guaranteed -55°C to 125°C