Features
• Two main operation modes
§ NORMAL Mode with all functionality
available
§ SLEEP Mode with very low current
consumption (less than 80μA)
• 10-bit ADC for measuring various parameters
• 4 general purpose ADC inputs configurable for
absolute or ratiometric mode
• 4 low RDS (ON) half-bridge drivers and 4 low
RDS (ON) high-side switches
• Analog EC mirror output controlled via 6-bit DAC
• All outputs short circuit protected
• Hardware 8-bit PWM control for half-bridge and
high-side drivers
• Over-temperature protection with automatic
driver shut-down
• Over-voltage and under-voltage detection with
automatic driver shut-down
• Overload and open/short diagnostic for all
outputs
• Embedded LIN 2.2/SAE J2602-2 transceiver
• Embedded ARM®
Cortex™-M0 microcontroller
• 8 user-configurable GPIO pins