GENERAL DESCRIPTION
The ADP3191/ADP3191A1 are highly efficient, multiphase, synchronous buck switching regulator controllers optimized for converting a 5 V or 12 V main supply into the core supply voltage required by high performance Intel processors. They use an internal 6-bit DAC to read a voltage identification (VID) code directly from the processor, which is used to set the output voltage between 0.8375 V and 1.6 V. The devices use a multimode PWM architecture to drive the logic-level outputs at a programmable switching frequency that can be optimized for VR size and efficiency. The phase relationship of the output signals can be programmed to provide 2-, 3-, or 4-phase operation, allowing for the construction of up to four complementary buck switching stages.

FEATURES
    Selectable 2-, 3-, or 4-phase operation at up to 1 MHz per phase
    ±14.5 mV worst-case differential sensing error over temperature
    Logic-level PWM outputs for interface to external high power drivers
    PWM Flex-ModeTM architecture for excellent load transient performance
    Active current balancing between all output phases
    Built-in power good/crowbar blanking supports on-the-fly VID code changes
    6-bit digitally programmable 0.8375 V to 1.6 V output
    Programmable short circuit protection with programmable latch-off delay

APPLICATIONS
    Desktop PC power supplies for Next-generation Intel® processors VRM modules
    Games consoles