1 Features
• Ultra-small X2SON, WSON, WQFN packages
• Wide supply voltage range of 1.6V to 6.5V
• Quiescent supply current of 315nA
• Low propagation delay of 3μs
• Rail-to-rail common-mode input voltage
• Internal hysteresis
• Push-pull output (TLV703x)
• Open-drain output (TLV704x)
• No phase reversal for overdriven inputs
• "S" and "L" alternate pinouts with 1.2V min supply
• –40°C to 125°C Operating temperature

2 Applications
• Mobile phones and tablets
• Headsets/headphones & earbuds
• PC & notebooks
• Gas Detector
• Smoke & heat detector
• Motion Detector
• Gas Meter
• Servo drive position sensor

3 Description
The TLV7031/41 (single-channel), TLV7032/42 (dualchannel),
and TLV7034/44 (quad-channel) are lowvoltage,
nanoPower comparators. These devices are
available in an ultra-small, leadless packages as
well as standard 5-pin SC70, SOT-23, VSSOP, and
TSSOP packages, making them applicable for spacecritical
designs like smartphones, smart meters, and
other portable or battery-powered applications.
The TLV703x and TLV704x offer an excellent
combination of speed and power, with a propagation
delay of 3μs and a quiescent supply current of 315nA.
The benefit of fast response time at nanoPower
enables power-conscious systems to monitor and
respond quickly to fault conditions. With an operating
voltage range of 1.6V to 6.5V, these comparators are
compatible with 3V and 5V systems.
The TLV703x and TLV704x is designed for no output
phase inversion with overdriven inputs and internal
hysteresis, so engineers can use this family of
comparators for precision voltage monitoring in harsh,
noisy environments where slow-moving input signals
must be converted into clean digital outputs.
The TLV703x has a push-pull output stage capable
of sinking and sourcing milliamps of current when
controlling an LED or driving a capacitive load. The
TLV704x has an open-drain output stage that can be
pulled beyond VCC, making the device an excellent
chice for level translators and bipolar to single-ended
converters. The "S" and "L" options are alternate
single pinouts with 1.2 minimum supply voltage.