General Description
The MAX96717F GMSL™ serializer receives video on a MIPI CSI-2 interface and outputs it on a GMSL2 serial link transceiver. Simultaneously, it sends and receives bidirectional control channel data across the same GMSL2 link. GMSL2 data can be transported over Coaxial or Shielded-Twisted Pair (STP) cables. It operates at a fixed rate of 3Gbps in the forward direction and 187.5Mbps in the reverse direction. The device is programmed through a local I2C/UART interface or across the link from a matching deserializer. The MAX96717F includes two I2C/UART pass-through channels, flexible GPIO, SPI tunnel, a builtin ADC, temperature sensor, and an extensive set of diagnostics for functional safety. Operation is specified over the automotive temperature range of -40°C to +105°C. The device is AEC-Q100 Grade 2 qualified.
Data can be transmitted over low-cost 50Ω Coax or 100Ω STP cables that meet the GMSL2 channel specification. Table 1 provides guidance to typical maximum lengths of commonly used automotive cables. Contact the factory for the GMSL2 channel specification.

Applications
● Advanced Driver Assistance Systems (ADAS)
• LiDAR Systems
• RADAR Systems
● 4Mp 40fps Forward-Vision Camera (FVC) Systems
● Surround View Systems (SVS)
● Driver Monitor Systems (DMS)
● Rear-View Camera (RVC)
● Systems with Multiple Synchronized Cameras

Benefits and Features
● Four-Lane D-PHY MIPI CSI-2 v1.3 Input Port
• 16 Virtual Channels
• Supports any CSI-2 Data Type in Tunneling Mode
● Advanced MIPI D-PHY v1.2 Receivers Rated at 2.5Gbps
• Polarity Flip and Data Lane Reassignment
● Full-Duplex Capability Over a Single Wire
• 3Gbps Forward-Link Rate
• 187.5Mbps Reverse-Link Rate
● CSI-2 ECC, Checksum Local, Remote Error Detection, and Flagging
● ASIL-B Compliant
• End-to-End Data Integrity through CRC in Tunneling Mode
• R-S FEC for Protection of Forward Video and Control-Channel Data
• CRC Protection of Side-Channel and Video Data
● Continuous Link-Margin Monitoring and Optimization
• Reverse-Channel Adaptive Equalization
• Reverse-Channel Eye-Opening Monitor for Continuous Link Margin Diagnosis
● Concurrent Side Channel for Device Configuration and Communication with Peripherals
• I2C/UART, Pass-Through I2C/UART, SPI, GPIO, and Register-Programmable GPIO
● Reference Over Reverse (RoR) Clocking Supports Crystal-Free Operation
● Generates Reference Clock for Image Sensor
● Die Temperature Monitor, Internal and External Supply Voltage Monitor
● Compact 5mm x 5mm TQFN Side-Wettable Package with 0.5mm Pitch