FEATURES
► Input voltage range: 0.6V to 5.5V
► BIAS voltage range: 2.375V to 5.5V
► Maximum output current: 3A
► I2C/PMBus communication
► Jumper selects bias mode of either external bias voltage or 3.3V
internal logic power from the PMBus interface
► Output voltage is precisely programmed to 1.20V by two 1%
resistors in series
► BNC connectors for noise and PSRR measurement
► Component placeholder can connect the PGFB pin directly to
BIASAF to keep PG high
► Operates standalone without PMBus programming
► Jumper turns regulator on or off
► Jumper enables or disables the internal clocks of LT3074 for
noise performance verification
► Jumper and resistor combinations select the serial bus interface
address
► Stacking connectors allow PMBus communication to multiple
EVAL-LT3074-AZ
► 6-pin 0.1 inch pitch connector implements Pmod Type 6 I2C
► LED indication of POWER ON, POWER GOOD and PMBus
ALERT
► Terminals provide output current and output regulation status
monitoring
► The VIOC pin of the LT3074 manages power dissipation and
PSRR
► Banana jacks minimize VIN and VOUT connection voltage drops
► VO+, VO−, and VI+ terminals for regulation and dropout monitoring
► Component footprint for an SMA connector that allows a shielded
VIN power connection
► 22-lead (3mm x 4mm) LQFN package