FEATURES
· Controlled Baseline
– One Assembly
– One Test Site
– One Fabrication Site
· Extended Temperature Performance of
–55°C to 125°C
· Enhanced Diminishing Manufacturing
Sources (DMS) Support
· Enhanced Product-Change Notification
· Qualification Pedigree (1)
· 14-Bit Dual Transmit Digital-to-Analog
Converter (DAC)
· 200-MSPS Update Rate
· Single Supply: 3 V to 3.6 V
· High Spurious-Free Dynamic Range (SFDR):
84 dBc at 5 MHz
· High Third-Order Two-Tone Intermodulation (IMD3): 79 dBc at 15.1 MHz and 16.1 MHz
· WCDMA Adjacent Channel Leakage Ratio
(ACLR): 78 dB at Baseband
· WCDMA ACLR: 73 dB at 30.72 MHz
· Independent or Single Resistor Gain Control
· Dual or Interleaved Data
· On-Chip 1.2-V Reference
· Low Power: 330 mW
· Power-Down Mode: 9 mW
· Package: 48-Pin Thin-Quad Flat Pack (TQFP)

APPLICATIONS
· Cellular Base Transceiver Station Transmit
Channel
– CDMA: W-CDMA, CDMA2000, IS-95
– TDMA: GSM, IS-136, EDGE/UWC-136
· Medical/Test Instrumentation
· Arbitrary Waveform Generators (ARB)
· Direct Digital Synthesis (DDS)
· Cable Modem Termination System (CMTS)

DESCRIPTION
The DAC5672 is a monolithic, dual-channel, 14-bit, high-speed digital-to-analog converter (DAC) with on-chip
voltage reference.
Operating with update rates of up to 200 MSPS, the DAC5672 offers exceptional dynamic performance, tight
gain, and offset matching characteristics that make it suitable in either I/Q baseband or direct IF communication
applications.
Each DAC has a high-impedance, differential-current output, suitable for single-ended or differential
analog-output configurations. External resistors allow scaling the full-scale output current for each DAC
separately or together, typically between 2 mA and 20 mA. An accurate on-chip voltage reference is temperature
compensated and delivers a stable 1.2-V reference voltage. Optionally, an external reference may be used.
The DAC5672 has two 14-bit parallel input ports with separate clocks and data latches. For flexibility, the
DAC5672 also supports multiplexed data for each DAC on one port when operating in the interleaved mode.
The DAC5672 has been specifically designed for a differential transformer-coupled output with a 50-W
doubly-terminated load. For a 20-mA full-scale output current, both a 4:1 impedance ratio (resulting in an output
power of 4 dBm) and 1:1 impedance ratio transformer (–2 dBm output power) are supported.
The DAC5672 is available in a 48-pin thin quad flat pack (TQFP) package. Pin compatibility between family
members provides 12-bit (DAC5662) and 14-bit (DAC5672) resolution. Furthermore, the DAC5672 is pin
compatible to the DAC2904 and AD9767 dual DACs. The device is characterized for operation over the military
temperature range of –55°C to 125°C.