Features
 AEC-Q100 qualified
 General
 Quad channel smart high-side driver with MultiSense analog feedback
 LED Mode for channel 0 and 1
 Very low standby current
 Compatible with 3 V and 5 V CMOS outputs
 MultiSense diagnostic functions
 Multiplexed analog feedback of:
 Load current with high precision proportional current mirror;
 VCC supply voltage;
 TCHIP device temperature
 Overload and short to ground (power limitation) indication
 Thermal shutdown indication
 OFF-state open load detection
 Output short to VCC detection
 Sense enable/disable
 Protections
 Undervoltage shutdown
 Overvoltage clamp
 Load current limitation
 Self limiting of fast thermal transients
 Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin
 Loss of ground and loss of VCC
 Reverse battery through self turn-on
 Electrostatic discharge protection