1FEATURES
2· FLEXIBLE SUPPLY RANGE:
+2.6V to +12V Single Supply
±1.3V to ±6V Dual Supplies
· UNITY-GAIN STABLE
· WIDEBAND ±5V OPERATION: 60MHz
(G = +2V/V)
· OUTPUT VOLTAGE SWING: ±4V
· HIGH SLEW RATE: 250V/ms
· LOW QUIESCENT CURRENT: 460mA/ch
· LOW DISABLE CURRENT: 18mA/ch

APPLICATIONS
· VIDEO LINE DRIVING
· xDSL LINE RECEIVERS
· HIGH-SPEED IMAGING CHANNELS
· ADC BUFFERS
· PORTABLE INSTRUMENTS
· TRANSIMPEDANCE AMPLIFIERS
· ACTIVE FILTERS

DESCRIPTION
The OPA2889 represents a major step forward in
unity-gain stable, voltage-feedback op amps. A new
internal architecture provides slew rate and full-power bandwidth previously found only in wideband,
current-feedback op amps. These capabilities give
exceptional full-power bandwidth. Using a dual ±5V
supply, the OPA2889 can deliver a ±4V output swing
with over 40mA drive current and 60MHz bandwidth. This combination of features makes the OPA2889 an
ideal RGB line driver or single-supply analog-to-digital
converter (ADC) input driver or low power twisted pair
line receiver.
The low 460mA/ch supply current of the OPA2889 is
precisely trimmed at +25°C. System power may be
reduced further using the optional disable control pin.
Leaving this disable pin open, or holding it HIGH,
operates the OPA2889 normally. If pulled LOW, the OPA2889 supply current drops to less than 20mA/ch
while the output goes into a high-impedance state.