8-position, industrial connectors shall be applicable for use in manufacturing
environments and shall meet/exceed the ANSI/TIA-568-C.2 standard for Category
5e performance requirements. Bulkhead RJ45 jack and plug shall incorporate an
IP67 rated seal and shall be designed to provide protection from dust and
temporary immersion in water typically found in harsh industrial environments.
Tethered protective cap shall ensure IP67 protection of the connector and plug in
the unmated condition. Secondary seals on both the connector and plug shall
provide an additional environmental barrier. Termination to a 4-pair 24 AWG 100
ohm twisted pair cable shall not require the use of a punchdown tool. AN IP67
rating shall be achieved when mated with an IP67 and NEMA UL Type 12
industrial grade, bayonet style patch cord.