Stud mounts used with heavy cable ties shall provide an
economical method of replacing cushion clamps, pipe
hangers, and other metal clamps used in heavy duty
OEM and transportation equipment. The stud mount shall
be hammered on or spun on existing weld studs,
Huck-Spin* bolts or exposed standard bolts. Optionally,
the mount can be secured with Panduit® Sta-Strap®
Chassis/Panel Mount Ties through the frame. The installed
mount shall exceed the minimum loop tensile of the cable
tie for which it is designed. The material shall be UV
resistant and meet the application temperature and the
recognized static ground storage requirements for heavy
vehicles. The material shall be impact resistant and resist
all common fuels, salt spray, and wash down chemicals.