GENERAL DESCRIPTION
The W78C32C microcontroller supplies a wider frequency range than most 8-bit microcontrollers on the market. It is compatible with the industry standard 80C32 microcontroller series.
The W78C32C contains four 8-bit bidirectional parallel ports, three 16-bit timer/counters, and a serial port. These peripherals are supported by a six-source, two-level interrupt capability. There are 256 bytes of RAM, and the device supports ROMless operation for application programs.
The W78C32C microcontroller has two power reduction modes, idle mode and power-down mode, both of which are software selectable. The idle mode turns off the processor clock but allows for continued peripheral operation. The power-down mode stops the crystal oscillator for minimum power consumption. The external clock can be stopped at any time and in any state without affecting the 1.processor.

FEATURES
● 8-bit CMOS microcontroller
● Fully static design
● Low standby current at full supply voltage
● DC-40 MHz operation
● 256 bytes of on-chip scratchpad RAM
● ROMless operation
● 64K bytes program memory address space
● 64K bytes data memory address space
● Four 8-bit bidirectional ports
● Three 16-bit timer/counters
● One full duplex serial port
● Boolean processor
● Six-source, two-level interrupt capability
● Built-in power management
● Packages:
   - DIP 40: W78C32C-24/40
   - PLCC 44: W78C32CP-24/40
   - QFP 44: W78C32CF-24/40