 |
Datenblatt-Suchmaschine für elektronische Bauteile |
|
|
Datenblatt-Suchmaschine für elektronische Bauteile |
|
02310HH02TXCG Verteiler |
| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty. BuyNow | |
 ComSIT USA | 1023106387 | SANYO DENKI AMERICA | AVAILABLE EU | 118 | ||
ComSIT USA | 9140023101 | HARTING Technology Group | Heavy Duty Connector Accessory Insert Frame RoHS : Compliant | 350 | ||
| FGB0023105 | feme | Electronic Component RoHS : Not Compliant | 200 | |||
 Chip 1 Exchange | NT-2030231-00 | INSTOCK | 7 | |||
| NT-3002310-00 | INSTOCK | 6 | ||||
 Avnet Silica | OX-171-0023-10M0000000 | Microchip Technology Inc | Oven Controlled OCXO Oscillators 10 MHz OCXO (Alt: OX-171-0023-10M0000000) RoHS : Compliant | 0 | ||
 Braemac Americas-Symmetry | ACML-0402-310-T | Abracon Corporation | RoHS : Compliant |
| 0 | |
 EBV Elektronik | CYBLE-212023-10 | Infineon Technologies AG | EZBLE Module Bluetooth Smart (Alt: SP005820292) RoHS : Compliant | 0 | ||
| PK8072006023100S RPL2 | Intel Corporation | INTEL XEON 6980P GRANITE RAPIDS CPU (Alt: 99CKX8) RoHS : Compliant | 0 | |||
 Master Electronics | 023100427 | TE Connectivity | The 023100427 is a white self-adhesive label of type MCLH-R1 used for marking terminal block assemblies on LH-R1 label holders. RoHS : Compliant |
| 20 | |
| FMO-30231000 | Carling Technologies | F-SERIES TOGGLE SWITCH RoHS : Compliant |
| 0 | ||
| 113023-1002C | ITT Interconnect Solutions | CIRCULAR RoHS : Not Compliant |
| 0 | ||
| 023105723 | TE Connectivity | ABB-CONNECTION - CONNECTION - MARKERS RoHS : Compliant |
| 0 | ||
| 023105804 | TE Connectivity | ABB-CONNECTION - CONNECTION - MARKERS RoHS : Compliant |
| 0 | ||
| 113023-1052C | ITT Interconnect Solutions | CIRCULAR RoHS : Not Compliant |
| 0 | ||
| 023101713 | TE Connectivity | ABB-CONNECTION - CONNECTION - MARKERS RoHS : Compliant |
| 0 | ||
| 023103414 | TE Connectivity | ABB-CONNECTION - CONNECTION - MARKERS RoHS : Compliant |
| 0 | ||
| 023104224 | TE Connectivity | ABB-CONNECTION - CONNECTION - MARKERS RoHS : Compliant |
| 0 | ||
| 023106907 | TE Connectivity | ABB-CONNECTION - CONNECTION - MARKERS RoHS : Compliant |
| 0 | ||
| 419-0023-100 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| FFSD-06-D-02.31-01-N | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 9670231-0000 | TE Connectivity | MOQ Reduction RoHS : Compliant |
| 0 | ||
| TCSD-13-D-02.31-01-N | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HCSD-18-S-02.31-01 | Samtec Inc | RoHS : Compliant |
| 0 | ||
 Neutron USA | MOX-400231007FE | Ohmite Mfg Co | Metal Oxide Resistors 1000M 1% RoHS : Compliant |
| 50 | |
| 1023100000 | Weidmüller Interface GmbH & Co. KG | DIN Rail Terminal Blocks 2.5,W/O RIBS,DIV CUR RoHS : Compliant |
| 50 | ||
| 09140023102 | HARTING Technology Group | Heavy Duty Power Connectors HAN MOD 40A FX2 CRIMP MODULE RoHS : Compliant |
| 50 | ||
| 6102.3100 | Schurter Electronic Components | AC Power Entry Modules Inlet Class II w/o Gnd Screw-on RoHS : Compliant |
| 50 | ||
| 09140023103 | HARTING Technology Group | Han 40A Crimp Module, Female UL 1000V RoHS : Compliant |
| 50 | ||
| MOX-750231006JE | Ohmite Mfg Co | Metal Oxide Resistors 100M ohms 5% RoHS : Compliant |
| 18 | ||
| 6002-310-007 | Digilent Inc | AC Power Cords Software Defined Radio - UK Power Cord for USRP X410/X300/X310/N300/N310/E320 12 V Power Supply |
| 6 | ||
| 150231-06 | AMETEK Inc | Blower, Nautilair, 8.9" variable speed, 120VAC, 1PH, 12A closed loop 5.7VDC |
| 6 | ||
| STD4023/1024 | HGST a Western Digital Company | 1GB (2 512mb kit) SimpleTech 168-pin PC133 ECC SDRAM Memory for Dell PowerApp.Web 120 PowerEdge 1550 1650 2500 2550(Compatible to Dell 3110855 3116573 ) |
| 3 | ||
| 6002-310-003 | Digilent Inc | AC Power Cords Software Defined Radio - US Power Cord for USRP 12 V Power Supply |
| 3 | ||
| 6002-310-002 | Digilent Inc | AC Power Cords Software Defined Radio - Europe Power Cord for USRP 12 V Power Supply |
| 3 | ||
| 09140023101 | HARTING Technology Group | Heavy Duty Power Connectors HAN QUINTAX 2P FEMAL ORDER CONTACTS SEP RoHS : Compliant |
| 0 | ||
| 150231-00 | AMETEK Inc | Blower, Nautilair, 8.9", 120V |
| 0 | ||
| 02310MUN-AO | AddOn Networks | HUAWEI 02310MUN-AO PASSIVE 1M COMPAT DAC TAA 10GBASE CU 1M |
| 0 | ||
| 02560231-000 | TE Connectivity | Angular position sensor, RVDT, R: ±30, Vout at R ends: 87mV/V, Sensitivity: 2.9 mV/V/degree, ±0.25% Non-linearity, -55~150°C RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3FCA023-10M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex LC UPC to SC UPC, MM OM4, 2.0mm Riser, Aqua - 10 meter. Pasternack’s PE3FCA023-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long patch cable assembly is equipped with simplex LC/UPC to SC/UPC connectors. Our aqua blue fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This multimode OM4 patch cable assembly is optimized for ultra-high-speed, high-bandwidth data transmission, supporting greater distances and faster speeds than OM1 and OM3 fiber. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA023-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of LC/UPC to SC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 87 | |
| PE3W08023-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SSMC Plug to SMB Jack Bulkhead Cable 100 cm Using RG178 Coax., Radio frequency assembly SSMC plug to SMB jack bulkhead cable 100 cm using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SSMC plug to SMB jack bulkhead cable 100 cm using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMC to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMC cable connection on one end and SMB bulkhead cable connection on the other. Our SSMC to SMB cable assemblies have a plug gender on end 1 and jack on end 2. This SSMC to SMB cable is a plug to jack coax assembly, PE3W08023-100CM, can also be known as a SSMC male to SMB female cable assembly and will be shipped same-day as it is purchased. SSMC male to SMB female cable assembly PE3W08023-100CM is built with RG178 which is a flexible coax type. The Pasternack flexible SSMC cable assembly is manufactured with SSMC to SMB cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 2 GHz maximum frequency SSMC plug to SMB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08023-100CM can also be used in the other direction and will be SMB jack bulkhead to SSMC plug cable assembly if the opposite connectivity is required. SSMC male to SMB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMC to SMB cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMC plug to SMB jack bulkhead cable 100 cm using RG178 coax. |
| 62 | ||
| PE2CP1023-10 | Pasternack Enterprises | Key Specifications, Directionality: Directional, Connector Series: N, Connector Gender: Female, Minimum Frequency: 800 MHz, Maximum Frequency: 2.5 GHz, Maximum Input Power: 60 Watt, Coupling Value: 10 dB. Directional 10 dB N Coupler From 800 MHz to 2.5 GHz Rated to 60 Watts. RF coupler part number PE2CP1023-10 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with type N ports. Our directional coupler design uses type N ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 800 MHz and a maximum frequency of 2.5 GHz. Directional coupler part # PE2CP1023-10 is constructed with a coupling value of 10 dB and a coupler directivity of 20 dB. This female type N directional coupler is built with a maximum insertion loss of 0.5 dB and a maximum input power of 60 watts. Our directional coupler design with type N connector is rated for a maximum insertion loss of 0.5 dB and a maximum VSWR of 1.25. Additional female N type coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2CP1023-10 directional 10 dB N type coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts. |
| 3 | ||
| PEWAT1023-10 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-90, Attenuation, Nominal: 10 dB, Attenuation, Typical: 0.7 dB, Flange Size: UG-39/U, Minimum Frequency: 8.2 GHz, Maximum Frequency: 12.4 GHz, Maximum Power: 2 W. WR-90 Waveguide Fixed Attenuator, 10 dB, from 8.2 GHz to 12.4 GHz, UG-39/U Square Cover Flange, Rated to 2 Watt. Pasternack’s PEWAT1023-10 is a waveguide fixed attenuator built to operate in full WR-90 band. This WR-90 waveguide attenuator comes with a grey paint finish and a maximum VSWR of 1.25:1. Our waveguide fixed attenuator is rated for a minimum frequency of 8.2 GHz and a maximum frequency of 12.4 GHz. Make your online purchase right now to take advantage of our same-day shipping. The PEWAT1023-10 WR-90 interface waveguide fixed attenuator from Pasternack is constructed with passivated-plated brass copper material. This waveguide attenuator has an overall length of 4.92 inches, a width of 1.63 inches and weighs 0.5 lbs. Our PEWAT1023-10 WR-90 waveguide fixed attenuator is rated for 0.7 of typical attenuation accuracy. This waveguide fixed attenuator from Pasternack is designed with a UG-39/U flange. The PEWAT1023-10 waveguide fixed attenuator is rated for maximum input power (CW) of 2 Watts along with 10 dB of nominal attenuation. Additional dimensions and specifications for this fixed waveguide attenuator are in our downloadable PDF datasheet. Pasternack’s WR-90 interface waveguide fixed attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 8.2 GHz waveguide fixed attenuator that meets your requirements. |
| 2 | ||
| PE3W02310/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMB Jack Bulkhead Low Loss Cable 36 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly SMA male to SMB jack bulkhead low loss cable 36 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMB jack bulkhead low loss cable 36 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMB bulkhead cable connection on the other. Our low loss SMA to SMB cable assembly has a male gender on end 1 and a jack on end 2. PE3W02310/HS-36 can also be known as a low loss SMA plug to SMB female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W02310/HS-36 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. SMA plug to SMB female cable assembly PE3W02310/HS-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W02310/HS-36 can also be used in the other direction and will be a SMB jack bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMB female bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA and SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMB low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W02310/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMB Jack Bulkhead Low Loss Cable 12 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly SMA male to SMB jack bulkhead low loss cable 12 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMB jack bulkhead low loss cable 12 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMB bulkhead cable connection on the other. Our low loss SMA to SMB cable assembly has a male gender on end 1 and a jack on end 2. PE3W02310/HS-12 can also be known as a low loss SMA plug to SMB female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W02310/HS-12 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. SMA plug to SMB female cable assembly PE3W02310/HS-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W02310/HS-12 can also be used in the other direction and will be a SMB jack bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMB female bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA and SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMB low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W02310/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to SMB Jack Bulkhead Low Loss Cable 60 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly SMA male to SMB jack bulkhead low loss cable 60 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMB jack bulkhead low loss cable 60 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMB bulkhead cable connection on the other. Our low loss SMA to SMB cable assembly has a male gender on end 1 and a jack on end 2. PE3W02310/HS-60 can also be known as a low loss SMA plug to SMB female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W02310/HS-60 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. SMA plug to SMB female cable assembly PE3W02310/HS-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W02310/HS-60 can also be used in the other direction and will be a SMB jack bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMB female bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA and SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMB low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W02310/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Male to SMB Jack Bulkhead Low Loss Cable Using LMR-195 Coax with HeatShrink., Radio frequency assembly SMA male to SMB jack bulkhead low loss cable using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMB jack bulkhead low loss cable using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMB bulkhead cable connection on the other. Our low loss SMA to SMB cable assembly has a male gender on end 1 and a jack on end 2. PE3W02310/HS can also be known as a low loss SMA plug to SMB female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W02310/HS RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. SMA plug to SMB female cable assembly PE3W02310/HS is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W02310/HS can also be used in the other direction and will be a SMB jack bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMB female bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA and SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMB low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3W02310/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMB Jack Bulkhead Low Loss Cable 24 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly SMA male to SMB jack bulkhead low loss cable 24 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMB jack bulkhead low loss cable 24 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMB bulkhead cable connection on the other. Our low loss SMA to SMB cable assembly has a male gender on end 1 and a jack on end 2. PE3W02310/HS-24 can also be known as a low loss SMA plug to SMB female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W02310/HS-24 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. SMA plug to SMB female cable assembly PE3W02310/HS-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W02310/HS-24 can also be used in the other direction and will be a SMB jack bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMB female bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA and SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMB low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W02310/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to SMB Jack Bulkhead Low Loss Cable 48 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly SMA male to SMB jack bulkhead low loss cable 48 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMB jack bulkhead low loss cable 48 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMB bulkhead cable connection on the other. Our low loss SMA to SMB cable assembly has a male gender on end 1 and a jack on end 2. PE3W02310/HS-48 can also be known as a low loss SMA plug to SMB female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W02310/HS-48 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. SMA plug to SMB female cable assembly PE3W02310/HS-48 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W02310/HS-48 can also be used in the other direction and will be a SMB jack bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMB female bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA and SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMB low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE34023-108 | Pasternack Enterprises | Key Specifications, Connector Series 1: LC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: LC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG219/79D, RF Cable Type: RG219, RF Cable Impedance: 50 Ohm, Length: 108 inches. LC Male to LC Male Cable 108 Inch Length Using RG219 Coax., Radio frequency assembly LC male to LC male cable 108 inch length using RG219 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. LC male to LC male cable 108 inch length using RG219 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom LC to LC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with LC cable connection on one end and LC cable connection on the other. Our LC to LC cable assemblies have a male gender on end 1 and male on end 2. This LC to LC cable is a male to male coax assembly, PE34023-108, can also be known as a LC plug to LC plug cable assembly and will be shipped same-day as it is purchased. LC plug to LC plug cable assembly PE34023-108 is built with RG219 which is a flexible coax type. The Pasternack flexible LC cable assembly is manufactured with LC to LC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency LC male to LC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. LC plug to LC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality LC to LC cable assembly for quick shipment worldwide. Variations of LC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this LC male to LC male cable 108 inch length using RG219 coax. |
| 0 | ||
| PE3W02310 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Male to SMB Jack Bulkhead Cable Using LMR-195 Coax. PE3W02310 is a SMA male to SMB jack bulkhead cable using LMR-195 coax. This Pasternack SMA male to SMB jack bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMB for connector 2. Our male SMA to jack SMB bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02310 SMA male to SMB jack bulkhead cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3M0023-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/60-RG142-27478, RF Cable Type: M17/60-RG142, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. MIL-DTL-17 SMA Male to SMA Male Cable 100 cm Length Using M17/60-RG142 Coax., Radio frequency assembly MIL-DTL-17 SMA male to SMA male cable 100 cm length using M17/60-RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male to SMA male cable 100 cm length using M17/60-RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/55-3028 SMA to M39012/55-3028 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/55-3028 SMA cable connection on one end and M39012/55-3028 SMA cable connection on the other. Our M39012/55-3028 SMA to M39012/55-3028 SMA cable assemblies have a male gender on end 1 and male on end 2. This M39012/55-3028 SMA to M39012/55-3028 SMA cable is a male to male coax assembly, PE3M0023-100CM, can also be known as a MIL-DTL-17/MIL-C-17 M39012/55-3028 SMA plug to M39012/55-3028 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/55-3028 SMA plug to M39012/55-3028 SMA plug cable assembly PE3M0023-100CM is built with M17/60-RG142 which is a flexible coax type. The Pasternack flexible M39012/55-3028 SMA cable assembly is manufactured with M39012/55-3028 SMA to M39012/55-3028 SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 12.4 GHz maximum frequency M39012/55-3028 SMA male to M39012/55-3028 SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. M39012/55-3028 SMA plug to M39012/55-3028 SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/55-3028 SMA to M39012/55-3028 SMA cable assembly for quick shipment worldwide. Variations of M39012/55-3028 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male to SMA male cable 100 cm length using M17/60-RG142 coax. |
| 0 | ||
 Vyrian | Y402310R0000C9R | Vishay Precision Group Inc | Fixed Resistor, Metal Foil, 0.3W, 10ohm, 87V, 0.25% +/-Tol, 0.2ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 8,850 | ||
| DS1023-100 | Analog Devices Inc | Silicon Delay Line, Programmable, 1-Func, 255-Tap, True Output, CMOS, PDIP16 | 5,100 | |||
| KX023-1025-FR | ROHM Semiconductor | Analog Circuit, 1 Func, PBGA16 RoHS : Compliant | 2,800 | |||
| PK8072006023100S RPL2 | Intel Corporation | 2,300 | ||||
| 7000-12321-0231000 | Murrelektronik | 1,650 | ||||
| PK8072006023100 | Intel Corporation | 1,200 | ||||
| 10132797-023100LF | Amphenol Communications Solutions | Board Stacking Connector, 20 Contact(s), 2 Row(s), Female, Straight, 0.02 inch Pitch, Surface Mount Terminal, Black Insulator, Plug | 1,150 | |||
| 7282-7023-10 | Yazaki Corp | Combination Line Connector, 2 Contact(s), Male | 580 | |||
| 462A023-100-0 | TE Connectivity | HEAT SHRINK BOOT, DUAL WALL, 26.9 ID Before Shrink, 1.9:1 Shrink Ratio, BLACK RoHS : Compliant | 290 | |||
| 5962R1023102VXC | Texas Instruments | Digital Signal Processor, 32-Ext Bit, 25MHz, CMOS, CQFP256 | 270 | |||
| 5962R1023101VXC | Texas Instruments | Digital Signal Processor, 32-Ext Bit, 25MHz, CMOS, CQFP256 RoHS : Not Compliant | 210 | |||
| 2F8-755086000202310 | Intel Corporation | 37 | ||||
| 1202310088 | Molex | Circular Connector RoHS : Compliant | 36 | |||
 Win Source Electronics | KX023-1025 | Kionix Inc | Accelerometer Specifications RoHS : Compliant |
| 38,390 | |
| KX023-1025-FR | Kionix Inc | ACCELEROMETER 2-8G I2C/SPI 16LGA / Accelerometer X, Y, Z Axis ±2g, 4g, 8g 0.39Hz ~ 800Hz 16-LGA (3x3) |
| 34,720 |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
German ▼ 
English
Chinese
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand