028GVD-R Price, Verteiler, Stock

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: UMCX 2.1, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-81mm, RF Cable Type: 0.81mm, RF Cable Impedance: 50. SMA Male to UMCX 2.1 Plug Cable Using 0.81mm Coax, RoHS. PE3CA1028 is a SMA male to UMCX 2.1 plug cable using 0.81mm coax. This Pasternack SMA male to UMCX 2.1 plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm UMCX 2.1 for connector 2. Our male SMA to plug UMCX 2.1 cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3CA1028 SMA male to UMCX 2.1 plug cable assembly is constructed with 0.81mm coax and the maximum VSWR is 1.5:1.

228

PE1028

Pasternack Enterprises

Key Specifications. Primary Application Audio/Video/Data Cable Family/Type D-Subminiature Part Type Dust Cap/Cover Connector Series 9-Pin D-Subminiature/HD15. Hinged D-Sub Hood Kit, DB9/HD15 Black., Pasternack’s PE1028 is a hinged D-sub hood kit that has a one-piece foldover design for easy and quick assembly. This hood kit comes with a thumbscrew that has 4-40 threads for common D-sub applications. The thumbscrew of this kit has a slotted head with diamond knurls that allow the user to secure or remove them quickly by hand or with a flat-blade screwdriver. Our black-colored hinged kit is made of polypropylene. The PE1028 hinged kit from Pasternack is built for 9-pin D-subminiature/HD15 connectors. This hood kit has a plastic backshell for covering D-sub cable assembly connectors. Our hinged D-sub hood kit is suitable for serial data transmission, data networks, instrument control, and device management. Additional specifications for this D-sub hood kit are on our downloadable PDF datasheet above. Pasternack has one of the largest in-stock selections of hinged D-sub hood kits for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal hood kit for your requirements.

1 : $4.57
25 : $4.34
50 : $4.11
100 : $3.93

PE3C0283/PH90

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to SMA Male Right Angle Cable Using LMR-195 Coax with 90 Deg. Clock. PE3C0283/PH90 is a TNC male right angle to SMA male right angle cable using LMR-195 coax. This Pasternack TNC male right angle to SMA male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. TNC right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0283/PH90 TNC male right angle to SMA male right angle cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C10287-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-LLPX, RF Cable Type: LMR-240-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Plenum TNC Male to TNC Male Low Loss Cable 48 Inch Length Using LMR-240-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum TNC male to TNC male low loss cable 48 inch length using LMR-240-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum TNC male to TNC male low loss cable 48 inch length using LMR-240-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our low loss a TNC to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10287-48 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10287-48 RF cable has a Fluoropolymer jacket of 0.214-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. The Pasternack TNC cable assembly is manufactured with TNC to TNC cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $77.99
10 : $76.43
25 : $74.87
100 : $73.31

PE3C1028LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Male to N Male Right Angle Cable Using LMR-400-U. PE3C1028LF/HS is a N male to N male right angle cable using LMR-400-UF coax. This Pasternack N male to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1028LF/HS N male to N male right angle cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W02816

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm. TNC Female to TNC Female Cable Using LMR-240-DB Coax. PE3W02816 is a TNC female to TNC female cable using LMR-240-DB coax. This Pasternack TNC female to TNC female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our female TNC to female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02816 TNC female to TNC female cable assembly is constructed with LMR-240-DB coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W02830LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to N Male Cable Using PE-C100-LSZH Coax with HeatShrink, LF Solder. PE3W02830LF/HS is a reverse polarity SMA male to N male cable using PE-C100-LSZH coax. This Pasternack reverse polarity SMA male to N male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our reverse polarity male SMA to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02830LF/HS SMA reverse polarity male to N male cable assembly is constructed with PE-C100-LSZH coax.

PE3W02839-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Reverse Polarity SMA Male to Reverse Polarity SMA Female Low Loss Cable 24 Inch Length Using LMR-240-UF Coax., Radio frequency assembly reverse polarity SMA male to reverse polarity SMA female low loss cable 24 inch length using LMR-240-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA male to reverse polarity SMA female low loss cable 24 inch length using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our low loss reverse polarity SMA to reverse polarity SMA cable assemblies have a male gender on end 1 and female on end 2. PE3W02839-24 can also be known as a low loss reverse polarity SMA plug to reverse polarity SMA jack cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA plug to reverse polarity SMA jack cable assembly PE3W02839-24 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 6 GHz maximum frequency reverse polarity SMA male to reverse polarity SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02839-24 can also be used in the other direction and will be reverse polarity SMA female to reverse polarity SMA male cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity plug to SMA reverse polarity jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA male to reverse polarity SMA female low loss cable 24 inch length using LMR-240-UF coax.

1 : $121.99
25 : $115.89
50 : $109.79
100 : $104.91

PE3W02898

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMB Jack to BNC Female Cable Using RG174 Coax. PE3W02898 is a SMB jack to BNC female cable using RG174 coax. This Pasternack SMB jack to BNC female cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm BNC for connector 2. Our jack SMB to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02898 SMB jack to BNC female cable assembly is constructed with RG174 coax.

PE3W07028

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. BNC Male to BNC Female Cable Using LMR-240-UF Coax. PE3W07028 is a BNC male to BNC female cable using LMR-240-UF coax. This Pasternack BNC male to BNC female cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07028 BNC male to BNC female cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W02839LF-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Reverse Polarity SMA Male to Reverse Polarity SMA Female Low Loss Cable 12 Inch Length Using LMR-240-UF Coax, LF Solder., Radio frequency assembly reverse polarity SMA male to reverse polarity SMA female low loss cable 12 inch length using LMR-240-UF coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The reverse polarity SMA male to reverse polarity SMA female low loss cable 12 inch length using LMR-240-UF coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a reverse polarity SMA cable connection on one end and a reverse polarity SMA cable connection on the other. Our low loss reverse polarity SMA to reverse polarity SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W02839LF-12 can also be known as a low loss reverse polarity SMA plug to reverse polarity SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W02839LF-12 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to SMA female cable has a maximum VSWR of 1.4:1. Reverse polarity SMA plug to reverse polarity SMA jack cable assembly PE3W02839LF-12 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W02839LF-12 can also be used in the other direction and will be a reverse polarity SMA female to reverse polarity SMA male cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity plug to SMA reverse polarity jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $93.99
10 : $92.11
25 : $90.23
100 : $88.35

PE3W02844

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. SMA Male to 2.92mm Male Cable Using RG405 Coax. PE3W02844 is a SMA male to 2.92mm male cable using RG405 coax. This Pasternack SMA male to 2.92mm male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm 2.92mm for connector 2. Our male SMA to male 2.92mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W02844 SMA male to 2.92mm male cable assembly is constructed with RG405 coax.

PE3W06028/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. UHF Male to BNC Male Right Angle Cable Using LMR-195 Coax with HeatShrink. PE3W06028/HS is a UHF male to BNC male right angle cable using LMR-195 coax. This Pasternack UHF male to BNC male right angle cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm BNC for connector 2. UHF to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male UHF to male BNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06028/HS UHF male to BNC male right angle cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W10285-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: FME, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. FME Jack to N Male Cable 36 Inch Length Using RG58 Coax., Radio frequency assembly FME jack to N male cable 36 inch length using RG58 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The FME jack to N male cable 36 inch length using RG58 coax, FME cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FME to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FME cable connection on one end and N type cable connection on the other. Our FME to type N cable assemblies have a jack gender on end 1 and male on end 2. PE3W10285-36 can also be known as a FME female to type N plug cable assembly and will be shipped same-day as it is purchased. FME female to N type plug cable assembly PE3W10285-36 is built with RG58 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this FME jack to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10285-36 can also be used in the other direction and will be type N male to FME jack cable assembly if the opposite connectivity is required. FME female to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FME to type N cable assembly for quick shipment worldwide. Variations of FME cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this FME jack to N male cable 36 inch length using RG58 coax.

1 : $91.99
25 : $87.39
50 : $82.79
100 : $79.11

PE6028-50

Pasternack Enterprises

Key Specifications, Termination Type: RF Load, Connector Series: N, Connector Gender: Female, Minimum Frequency: DC, Maximum Frequency: 1 GHz, Impedance: 50 Ohm, Maximum Power: 0.5 Watt. 0.5 Watt RF Load Up to 1,000 MHz with N Female Nickel Plated Brass. PE6028-50 0.5 Watts RF load (also known as termination or dummy load) has a type N connector that is female. This Pasternack 0.5 watt type N female load / termination is rated for a maximum frequency of 1 GHz. Our N type female termination load is a rf load termination with a 50 Ohm impedance. This type N load / coax terminator is manufactured with no chain. PE6028-50 0.5 watt type N female load termination is one of over 40,000 RF, microwave and millimeter wave components in-stock at Pasternack. Our type N female 0.5 watt termination load will ship worldwide the same day as purchased.

1 : $31.99
25 : $30.39
50 : $28.79
100 : $27.51

Teledyne HiRel

M38510/28904BYA

Teledyne HiRel

STATIC RAM, 1K X 4, 55 NS ACCESS TIME
RoHS : Not Compliant

M38510/28902BYA

Teledyne HiRel

STATIC RAM, 1K X 4, 35 NS ACCESS TIME
RoHS : Not Compliant

M38510/28904BVA

Teledyne HiRel

STATIC RAM, 1K X 4, 55 NS ACCESS TIME
RoHS : Not Compliant

M38510/28902BVA

Teledyne HiRel

STATIC RAM, 1K X 4, 35 NS ACCESS TIME
RoHS : Not Compliant

M38510/28904BXA

Teledyne HiRel

STATIC RAM, 1K X 4, 55 NS ACCESS TIME
RoHS : Not Compliant

M38510/28902BXA

Teledyne HiRel

STATIC RAM, 1K X 4, 35 NS ACCESS TIME
RoHS : Not Compliant

Venkel Ltd.

C1206X7R102-821MNE

VENKEL LTD

HV Chip Capacitor;1206;X7R;1000V;820pF;�20%
RoHS : Compliant

SMPI606028-180MU

VENKEL LTD

Square Miniature Power Inductor;606028;18uH;�20%
RoHS : Compliant

SMPI606028-101NU

VENKEL LTD

Square Miniature Power Inductor;606028;100uH;�30%
RoHS : Compliant

C1808X7R102-822KNE

VENKEL LTD

HV Chip Capacitor;1808;X7R;1000V;8200pF;�10%
RoHS : Compliant

C1812C0G202-820JNE

VENKEL LTD

HV Chip Capacitor;1812;C0G;2000V;82pF;�5%
RoHS : Compliant

C1808C0G202-8R2CNE

VENKEL LTD

HV Chip Capacitor;1808;C0G;2000V;8.2pF;�0.25pF
RoHS : Compliant

C1206C0G202-820JNP

VENKEL LTD

HV Chip Capacitor;1206;C0G;2000V;82pF;�5%
RoHS : Compliant

SAFC1808C0G202-820JNE

VENKEL LTD

Safety Cap;1808;C0G;X2;82pF;�5%
RoHS : Compliant

SAFC1808X7R502-821KNE

VENKEL LTD

Safety Cap;1808;X7R;X1/Y2;820pF;�10%
RoHS : Compliant

C1812C0G102-820KNE

VENKEL LTD

HV Chip Capacitor;1812;C0G;1000V;82pF;�10%
RoHS : Compliant

SMPI606028-100MU

VENKEL LTD

Square Miniature Power Inductor;606028;10uH;�20%
RoHS : Compliant

SMPI606028-3R3NU

VENKEL LTD

Square Miniature Power Inductor;606028;3.3uH;�30%
RoHS : Compliant

SMPI606028-470MU

VENKEL LTD

Square Miniature Power Inductor;606028;47uH;�20%
RoHS : Compliant

SMPI606028-6R8MU

VENKEL LTD

Square Miniature Power Inductor;606028;6.8uH;�20%
RoHS : Compliant

C1206X7R102-822KNE

VENKEL LTD

HV Chip Capacitor;1206;X7R;1000V;8200pF;�10%
RoHS : Compliant

Vyrian

1052028:0051

Phoenix Contact

Terminal Block Accessory, Marker Strip, PA
RoHS : Compliant

12,258

802-80-028-66-001101

PRECI-DIP SSA

Board Connector, 28 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Press Fit Terminal, Black Insulator
RoHS : Compliant

10,791

2N6028RLRAG

onsemi

Programmable UJT, TO-92
RoHS : Compliant

9,276

LT3028EFE

Analog Devices Inc

Adjustable Positive LDO Regulator, 2 Output, 1.22V1 Min, 1.22V2 Min, 20V1 Max, 20V2 Max, PDSO16
RoHS : Not Compliant

8,099

5055680281

Molex

Board Connector, 2 Contact(s), 1 Row(s), Male, Straight, 0.049 inch Pitch, Surface Mount Terminal, Black Insulator, Plug
RoHS : Compliant

6,424

XC4028EX-4HQ208C

AMD Xilinx

Field Programmable Gate Array, 1024 CLBs, 18000 Gates, 143MHz, 1024-Cell, CMOS, PQFP208
RoHS : Not Compliant

3,389

XC4028XL-3HQG304I

AMD Xilinx

Field Programmable Gate Array, 1024 CLBs, 18000 Gates, 166MHz, CMOS, PQFP304
RoHS : Compliant

3,100

XC4028EX-4BG352I

AMD Xilinx

Field Programmable Gate Array, 1024 CLBs, 18000 Gates, 143MHz, 1024-Cell, CMOS, PBGA352
RoHS : Not Compliant

3,027

XH4028XLPQPQ208I

AMD Xilinx

Field Programmable Gate Array, CMOS, PQFP208

2,754

XC4028XLA-07HQ160C

AMD Xilinx

Field Programmable Gate Array, 1024 CLBs, 18000 Gates, 294MHz, 1024-Cell, CMOS, PQFP160
RoHS : Not Compliant

2,617

XC4028XL

AMD Xilinx

2,399

XC4028EX-3PQPQ240C

AMD Xilinx

Field Programmable Gate Array, CMOS, PQFP240
RoHS : Not Compliant

1,773

XC4028XLA-07BG256C

AMD Xilinx

Field Programmable Gate Array, 1024 CLBs, 18000 Gates, 294MHz, 1024-Cell, CMOS, PBGA256
RoHS : Not Compliant

1,496

XC4028XL-2BGG352C

AMD Xilinx

Field Programmable Gate Array, 1024 CLBs, 18000 Gates, 179MHz, CMOS, PBGA352
RoHS : Compliant

1,363

5-102802-8

Tyco Electronics Amp

Board Connector, 40 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal, Guide Pin, Black Insulator

850

Win Source Electronics

SGM2028-3.3YN5G/TR

SG Micro Corp

RoHS : Compliant

1,875 : $0.1604
1,400 : $0.1789
1,085 : $0.185
785 : $0.1912
510 : $0.1974
210 : $0.2405

53,666

MC14028BCPG

onsemi

BCD-To-Decimal Decoder Binary-To-Octal Decoder
RoHS : Compliant

1,090 : $0.3084
875 : $0.321
675 : $0.3335
470 : $0.3586
305 : $0.3712
145 : $0.3963

47,250

BSZ028N04LS

Infineon Technologies AG

OptiMOSTM Power-MOSFET, 40 V
RoHS : Compliant

535 : $0.6287
400 : $0.7012
310 : $0.7253
225 : $0.7495
145 : $0.7737
60 : $0.9429

33,920

0287010.PXCN

Littelfuse Inc

FUSE AUTOMOTIVE 10A 32VDC BLADE / ATOF™ Blade Fuse Rated 32V
RoHS : Compliant

5,665 : $0.053
4,235 : $0.0591
3,275 : $0.0611
2,375 : $0.0632
1,535 : $0.0652
630 : $0.0794

24,374

TA0281A

Tai-Saw Technology Co Ltd

SAW Filter 915 MHz
RoHS : Compliant

500 : $0.6039
375 : $0.6736
290 : $0.6968
210 : $0.72
135 : $0.7433
60 : $0.9059

23,449

TLIN10285DRBRQ1

Texas Instruments

IC TRANSCEIVER 1/1 8VSON / 1/1 Transceiver LIN 8-SON (3x3)
RoHS : Compliant

250 : $1.2023
200 : $1.2512
155 : $1.3
110 : $1.3978
70 : $1.4467
35 : $1.5444

20,000

BSC028N06NS

Infineon Technologies AG

Trans MOSFET N-CH 60V 100A 8-Pin TDSON EP T/R / New OptiMOS™ 40V and 60V
RoHS : Compliant

385 : $0.7879
285 : $0.8788
220 : $0.9091
160 : $0.9394
105 : $0.9697
45 : $1.1819

20,000

SRR4028-101Y

Bourns Inc

FIXED IND 100UH 510MA 600 MOHM / SRR4028 Series - Shielded SMD Power Inductors
RoHS : Compliant

705 : $0.4278
525 : $0.4772
410 : $0.4936
295 : $0.5101
190 : $0.5265
80 : $0.6417

19,792

TPS73028DBVR

Texas Instruments

IC REG LDO 2.8V 0.2A SOT23-5
RoHS : Compliant

305 : $0.9997
225 : $1.115
175 : $1.1534
130 : $1.1919
85 : $1.2303
35 : $1.4995

18,250

AD8028ARM

Analog Devices Inc

IC OPAMP R-R DUAL LDIST 10MSOP
RoHS : Not Compliant

115 : $3.375
92 : $3.516
71 : $3.657
50 : $3.9377
32 : $4.0787
15 : $4.3595

10,011

TQP3M9028

TriQuint Semiconductor

RF Amp Single Cascadable Amp 4GHz 5.25V 4-Pin(3+Tab) SOT-89 T/R / High Linearity LNA Gain Block
RoHS : Compliant

136 : $2.2196
101 : $2.4757
79 : $2.5611
57 : $2.6464
37 : $2.7318
16 : $3.3294

10,000

0287002.PXCN

Littelfuse Inc

FUSE AUTO 2A 32VDC BLADE / ATOF™ Blade Fuse Rated 32V
RoHS : Compliant

5,705 : $0.0526
4,270 : $0.0586
3,305 : $0.0606
2,395 : $0.0627
1,550 : $0.0647
635 : $0.0788

8,000

ADUM6028-5BRIZ-RL

Analog Devices Inc

DC DC CONVERTER 3.3V 5V 300MW / Isolated Module DC DC Converter 1 Output 3.3V, 5V 60mA 4.5V - 5.5V Input
RoHS : Compliant

29 : $11.8063
22 : $13.1685
17 : $13.6226
12 : $14.0767
8 : $14.5308
4 : $17.7093

7,500

TPS79028DBVT

Texas Instruments

IC REG LDO 2.8V 50MA SOT23-5
RoHS : Compliant

475 : $0.7083
355 : $0.79
275 : $0.8173
200 : $0.8446
130 : $0.8718
55 : $1.0624

5,450

744028004

Wurth Elektronik

FIXED IND 4.7UH 850MA 310MOHM SM
RoHS : Compliant

350 : $0.9635
265 : $1.0748
205 : $1.1118
150 : $1.1489
95 : $1.186
40 : $1.4454

2,695

Wuhan P&S

10145028-030LF

Amphenol FCi

Wire-to-board connector, socket, 30 positions, left and right double row

1 : $5.58
100 : $2.24
500 : $2.07
1,000 : $2.01

5,000

10028917-001LF

Amphenol FCi

Power Header 2x2
RoHS : Compliant

1 : $7.05
100 : $6.74
500 : $5.9
1,000 : $5.69

300

028GVD-R Verteiler

Link URL