08480800ACNRWNFZCWC Price, Verteiler, Stock

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. SMA Male to SSMC Plug Right Angle Cable Using RG188-DS Coax. PE3W08402 is a SMA male to SSMC plug right angle cable using RG188-DS coax. This Pasternack SMA male to SSMC plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SSMC for connector 2. SMA to SSMC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to plug SSMC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08402 SMA male to SSMC plug right angle cable assembly is constructed with RG188-DS coax.

730

PE3W02084/HS-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male Right Angle to BNC Male Right Angle Low Loss Cable 36 Inch Length Using LMR-240 Coax with HeatShrink., Radio frequency assembly N male right angle to BNC male right angle low loss cable 36 inch length using LMR-240 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to BNC male right angle low loss cable 36 inch length using LMR-240 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and right angle BNC cable connection on the other. Our low loss right angle N type to right angle BNC cable assemblies have a male gender on end 1 and male on end 2. PE3W02084/HS-36 can also be known as a low loss right angle type N plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to BNC plug cable assembly PE3W02084/HS-36 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to right angle BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency type N right angle male to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02084/HS-36 can also be used in the other direction and will be right angle BNC male to right angle N type male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to BNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to BNC male right angle low loss cable 36 inch length using LMR-240 coax with heatshrink.

1 : $183.99
25 : $174.79
50 : $165.59
100 : $158.23

PE3M0084-72

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/128-RG400-27478, RF Cable Type: M17/128-RG400, RF Cable Impedance: 50 Ohm, Length: 72 inches. MIL-DTL-17 TNC Male to TNC Male Cable 72 Inch Length Using M17/128-RG400 Coax., Radio frequency assembly MIL-DTL-17 TNC male to TNC male cable 72 inch length using M17/128-RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 TNC male to TNC male cable 72 inch length using M17/128-RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/26-0011 TNC to M39012/26-0011 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/26-0011 TNC cable connection on one end and M39012/26-0011 TNC cable connection on the other. Our M39012/26-0011 TNC to M39012/26-0011 TNC cable assemblies have a male gender on end 1 and male on end 2. This M39012/26-0011 TNC to M39012/26-0011 TNC cable is a male to male coax assembly, PE3M0084-72, can also be known as a MIL-DTL-17/MIL-C-17 M39012/26-0011 TNC plug to M39012/26-0011 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/26-0011 TNC plug to M39012/26-0011 TNC plug cable assembly PE3M0084-72 is built with M17/128-RG400 which is a flexible coax type. The Pasternack flexible M39012/26-0011 TNC cable assembly is manufactured with M39012/26-0011 TNC to M39012/26-0011 TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/26-0011 TNC male to M39012/26-0011 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. M39012/26-0011 TNC plug to M39012/26-0011 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/26-0011 TNC to M39012/26-0011 TNC cable assembly for quick shipment worldwide. Variations of M39012/26-0011 TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 TNC male to TNC male cable 72 inch length using M17/128-RG400 coax.

1 : $229.99
25 : $218.49
50 : $206.99

PE33084-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Female Bulkhead to SMA Female Bulkhead Cable 12 Inch Length Using RG178 Coax., Radio frequency assembly SMA female bulkhead to SMA female bulkhead cable 12 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to SMA female bulkhead cable 12 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and SMA bulkhead cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE33084-12, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE33084-12 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA female bulkhead to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack bulkhead to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SMA female bulkhead cable 12 inch length using RG178 coax.

1 : $81.99
25 : $77.89
50 : $73.79
100 : $70.51

PE3C0848

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Low Loss Cable Using LMR-400 Coax., Radio frequency assembly SMA male to SMA male low loss cable using LMR-400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable using LMR-400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C0848 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C0848 is built with LMR-400 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low loss cable using LMR-400 coax.

PE3C0848/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMA Male Low Loss Cable 12 Inch Length Using LMR-400 Coax with HeatShrink., Radio frequency assembly SMA male to SMA male low loss cable 12 inch length using LMR-400 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable 12 inch length using LMR-400 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C0848/HS-12 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0848/HS-12 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C0848/HS-12 is built with LMR-400 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $161.99
25 : $153.89
50 : $145.79
100 : $139.31

PE3C10846-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Male to SMP Female Non-Magnetic Cable 6 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10846-6 non-magnetic SMA male to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMP cable connection on the other. Our SMA to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10846-6 can also be known as a non-magnetic SMA plug to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10846-6 SMA plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMP cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 6-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10846-6 can also be used in the other direction and will be an SMP female to SMA male cable assembly if the opposite connectivity is required. This non-magnetic SMA plug to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP non-magnetic RF cable assembly as per your requirements.

1 : $194.32
25 : $184.6
50 : $174.89
100 : $167.12

PE3W08084/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using RG405 Coax with HeatShrink. PE3W08084/HS is a SMA male to SMA male cable using RG405 coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W08084/HS SMA male to SMA male cable assembly is constructed with RG405 coax.

PE3W08428/PH45

Pasternack Enterprises

PE3W08439

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to 2.92mm Male Cable Using PE-SR047FL Coax. PE3W08439 is a SMP female right angle to 2.92mm male cable using PE-SR047FL coax. This Pasternack SMP female right angle to 2.92mm male cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm 2.92mm for connector 2. SMP right angle to 2.92mm coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMP right angle to male 2.92mm cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W08439 SMP female right angle to 2.92mm male cable assembly is constructed with PE-SR047FL coax.

PE3W08449/HS-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. MMCX Plug to SMC Plug Cable 60 Inch Length Using RG188-DS Coax with HeatShrink., Radio frequency assembly MMCX plug to SMC plug cable 60 inch length using RG188-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug to SMC plug cable 60 inch length using RG188-DS coax with heatshrink, MMCX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MMCX cable connection on one end and SMC cable connection on the other. Our MMCX to SMC cable assemblies have a plug gender on end 1 and plug on end 2. PE3W08449/HS-60 can also be known as a MMCX male to SMC male cable assembly and will be shipped same-day as it is purchased. MMCX male to SMC male cable assembly PE3W08449/HS-60 is built with RG188-DS which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with MMCX to SMC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency MMCX plug to SMC plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08449/HS-60 can also be used in the other direction and will be SMC plug to MMCX plug cable assembly if the opposite connectivity is required. MMCX male to SMC male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to SMC cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug to SMC plug cable 60 inch length using RG188-DS coax with heatshrink.

1 : $139.99
25 : $132.99
50 : $125.99
100 : $120.39

PE3W08467-24

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length: 24 inches. N Male to N Male Right Angle Cable 24 Inch Using LMR-600-DB Coax., Radio frequency assembly N male to N male right angle cable 24 inch using LMR-600-DB coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to N male right angle cable 24 inch using LMR-600-DB coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and right angle N type cable connection on the other. Our low loss type N to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE3W08467-24, can also be known as a low loss N type plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3W08467-24 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08467-24 can also be used in the other direction and will be right angle type N male to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle cable 24 inch using LMR-600-DB coax.

1 : $261.99
25 : $248.89
50 : $235.79
100 : $225.31

PE3W08484

Pasternack Enterprises

PE3C0847/HSGR

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm. SMA Male to TNC Male Low Loss Cable Using PE-P142LL Coax., Radio frequency assembly SMA male to TNC male low loss cable using PE-P142LL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male low loss cable using PE-P142LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our low loss SMA to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C0847/HSGR can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3C0847/HSGR is built with PE-P142LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0847/HSGR can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male low loss cable using PE-P142LL coax.

PE3C10841

Pasternack Enterprises

Venkel Ltd.

TFCR1210-4W-K-2084DT-1K

VENKEL LTD

Thin Film CR;1210;1/4W;�100PPM;2.08M;�0.5%
RoHS : Compliant

TFCR2512-2W-E-2084CT

VENKEL LTD

Thin Film CR;2512;1/2W;�25PPM;2.08M;�0.25%
RoHS : Compliant

LMCI1608-47NKT

VENKEL LTD

Low Value Multilayer Chip Inductor;0603;47nH;�10%
RoHS : Compliant

TFCR1206-8W-K-2084FT

VENKEL LTD

Thin Film CR;1206;1/8W;�100PPM;2.08M;�1%
RoHS : Compliant

TFCR1210-4W-C-2084BT-1K

VENKEL LTD

Thin Film CR;1210;1/4W;�50PPM;2.08M;�0.1%
RoHS : Compliant

TFCR1210-4W-K-2084FT-1K

VENKEL LTD

Thin Film CR;1210;1/4W;�100PPM;2.08M;�1%
RoHS : Compliant

MLF1608-4R7KT

VENKEL LTD

Multilayer Chip Inductor;0603;4.7uH;�10%
RoHS : Compliant

TFCR1206-8W-C-2084BT-1K

VENKEL LTD

Thin Film CR;1206;1/8W;�50PPM;2.08M;�0.1%
RoHS : Compliant

TFCR1206-8W-K-2084FT-1K

VENKEL LTD

Thin Film CR;1206;1/8W;�100PPM;2.08M;�1%
RoHS : Compliant

TFCR2512-2W-C-2084CT-1K

VENKEL LTD

Thin Film CR;2512;1/2W;�50PPM;2.08M;�0.25%
RoHS : Compliant

TFCR1210-4W-E-2084FT

VENKEL LTD

Thin Film CR;1210;1/4W;�25PPM;2.08M;�1%
RoHS : Compliant

MLF1608-4R7MT

VENKEL LTD

Multilayer Chip Inductor;0603;4.7uH;�20%
RoHS : Compliant

TFCR1206-8W-C-2084FT-1K

VENKEL LTD

Thin Film CR;1206;1/8W;�50PPM;2.08M;�1%
RoHS : Compliant

MLF1608-47NMT

VENKEL LTD

Multilayer Chip Inductor;0603;47nH;�20%
RoHS : Compliant

TFCR1206-8W-C-2084DT-1K

VENKEL LTD

Thin Film CR;1206;1/8W;�50PPM;2.08M;�0.5%
RoHS : Compliant

Vyrian

PX0849/A

Bulgin

USB Connector, 4 Contact(s), Male
RoHS : Compliant

12,707

LT1084CT-12#PBF

Analog Devices Inc

Fixed Positive LDO Regulator, 12V, 1.5V Dropout, BIPolar, PSFM3
RoHS : Compliant

10,837

RBO08-40G

STMicroelectronics

Silicon Surge Protector
RoHS : Compliant

10,539

LTC6084CDD-PBF

Analog Devices Inc

10,052

MAX20084ATEB-VY+T

Analog Devices (Maxim Integrated)

9,500

IPP084N06L3GXKSA1

Infineon Technologies AG

Power Field-Effect Transistor, 50A I(D), 60V, 0.0084ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB
RoHS : Compliant

8,944

M80-8410845

Harwin PLC

Board Connector, 8 Contact(s), 2 Row(s), Male, Right Angle, 0.079 inch Pitch, Solder Terminal, Locking, Black Insulator, Plug

8,569

MAX5084ATT+

Analog Devices Inc

Fixed/Adjustable Positive Standard Regulator, 5V, BICMOS
RoHS : Compliant

7,367

BTB08-400CRG

STMicroelectronics

TRIAC, 400V V(DRM), 8A I(T)RMS
RoHS : Compliant

5,467

LTC6084CMS8#TR

Analog Devices Inc

Operational Amplifier, 2 Func, 900uV Offset-Max, CMOS, PDSO8
RoHS : Not Compliant

5,105

EPF10K30QI208-4

Altera Corporation

Loadable PLD, 21.1ns, CMOS, PQFP208

3,997

DT108/4GB

Kingston Technology Company

3,600

MT5C6408-45

Micron Technology Inc

Memory IC

2,831

MT5LC1008-45IT

Micron Technology Inc

Standard SRAM, 128KX8, 45ns, CMOS, PDIP32
RoHS : Not Compliant

2,623

LK16084R7K-T

TAIYO YUDEN

General Purpose Inductor, 4.7uH, 10%, 1 Element, Ferrite-Core, SMD, 0603
RoHS : Compliant

1,064

Win Source Electronics

TL084IDRG4

Texas Instruments

IC OPAMP JFET 3MHZ 14SOIC
RoHS : Compliant

3,800 : $0.0885
3,045 : $0.0921
2,345 : $0.0956
1,635 : $0.1028
1,055 : $0.1064
495 : $0.1137

165,270

TL084CD

Texas Instruments

IC OPAMP JFET 3MHZ 14SOIC
RoHS : Compliant

2,515 : $0.1193
2,015 : $0.1242
1,555 : $0.129
1,085 : $0.1387
700 : $0.1436
330 : $0.1533

118,000

DAC084S085CISDX

Texas Instruments

IC DAC 8BIT V-OUT 10WSON
RoHS : Not Compliant

172 : $1.9613
128 : $2.1877
99 : $2.2632
72 : $2.3386
47 : $2.414
20 : $2.942

27,700

ADA4084-1ARJZ-R7

Analog Devices Inc

IC OPAMP GP 1 CIRCUIT SOT23-5 / General Purpose Amplifier 1 Circuit Rail-to-Rail SOT-23-5
RoHS : Compliant

73 : $4.1585
54 : $4.6383
42 : $4.7982
31 : $4.9582
20 : $5.1181
9 : $6.2377

16,000

BSC084P03NS3G

Infineon Technologies AG

OptiMOS P3 Power-Transistor
RoHS : Compliant

435 : $0.7813
345 : $0.8131
270 : $0.8449
185 : $0.9084
120 : $0.9401
60 : $1.0036

9,560

AZ1084CS2-3.3TRE1

Diodes Incorporated

LDO Regulator Pos 3.3V 5A 3-Pin(2+Tab) TO-263 T/R / IC REG LDO 3.3V 5A TO263-2
RoHS : Compliant

770 : $0.391
575 : $0.4361
445 : $0.4512
325 : $0.4662
210 : $0.4813
90 : $0.5865

8,000

LM1084IS-3.3

Texas Instruments

IC REG LDO 3.3V 5A DDPAK
RoHS : Not Compliant

124 : $2.7275
99 : $2.8384
76 : $2.9493
53 : $3.1711
35 : $3.2819
16 : $3.5036

5,590

TL084BCD

Texas Instruments

GENERAL PURPOSEJ-FET QUAD OPERATIONAL AMPLIFIERS | IC OPAMP JFET 4 CIRCUIT 14SOIC
RoHS : Compliant

535 : $0.6311
400 : $0.7039
310 : $0.7282
225 : $0.7525
145 : $0.7767
60 : $0.9466

5,300

ADA4084-2ARMZ-R7

Analog Devices Inc

30 V, Low Noise, Rail-to-Rail | IC OPAMP GP 2 CIRCUIT 8MSOP
RoHS : Compliant

9 : $37.2728
7 : $38.7879
5 : $40.3031
4 : $43.3334
3 : $44.8485
2 : $47.8788

4,680

046806050000846+

Kyocera AVX Components

CONN FFC BOTTOM 50POS 0.5MM R/A

192 : $1.564
144 : $1.7444
111 : $1.8046
81 : $1.8647
52 : $1.9249
22 : $2.3459

2,000

EPF10K20RC208-4

Altera Corporation

IC FPGA 147 I/O 208RQFP
RoHS : Not Compliant

4 : $86.357
3 : $89.8676
2 : $93.378
1 : $100.3988

1,500

LM1084IT-5.0

Texas Instruments

LDO Regulator Pos 5V 5A 3-Pin(3+Tab) TO-220 Rail / IC REG LDO 5V 5A TO220-3
RoHS : Not Compliant

1,800 : $0.1668
1,345 : $0.1861
1,040 : $0.1925
755 : $0.1989
490 : $0.2053
200 : $0.2502

1,444

K4B2G0846F-BYK0

Samsung Electronics Co. Ltd

26 : $13.1369
20 : $14.6527
15 : $15.158
11 : $15.6632
7 : $16.1684
3 : $19.7053

700

K4T1G084QG-BCE7

Samsung Electronics Co. Ltd

8 : $43.4627
6 : $48.4776
5 : $50.1493
4 : $51.8209
3 : $53.4925
1 : $65.1941

461

K4T1G084QG-BCE7T00

Samsung Electronics Co. Ltd

DDR2-800 128Mx8

31 : $10.8657
24 : $12.1194
18 : $12.5374
13 : $12.9553
9 : $13.3731
4 : $16.2986

420

08480800ACNRWNFZCWC Verteiler

Link URL