088G-S08-R Price, Verteiler, Stock

Pluggable terminal block; 5.08mm pitch; 8-ways; female; for wire 2.5mm2 (28-12AWG); wire insertion direction same as plug-in direction; p.bronze contacts; steel cage; UL 300V/15A;

300 : $0.356
50 : $0.43
10 : $0.466
1 : $0.501

1,000

KF2EDGCV-X-5.08-8P

KAIFENG

Pluggable terminal block; pitch 5.08mm; 8-ways; male; straight pin header; closed type; UL 300V/15A; TUV:320V/20A

1,000 : $0.237
500 : $0.257
100 : $0.282
25 : $0.3
1 : $0.328

915

KF2EDGR-X-5.08-8P

KAIFENG

Pluggable terminal block; pitch 5.08mm; 8-ways; male; r/a pin header; open type; UL 300V/15A, TUV 320V/20A

1,000 : $0.232
500 : $0.26
100 : $0.282
25 : $0.308
1 : $0.328

755

SN65HVD3088EDR

Texas Instruments

Other Interface ICs; SN65HVD3088EDR; TEXAS INSTRUMENTS; 8; 5.5 V; 4.5 V; SOIC
RoHS : Compliant

1,000 : $0.708
500 : $0.766
100 : $0.924
30 : $1.115
10 : $1.318
1 : $1.751

539

ULO-TB29-2KA/5.08-8P-4000A

ULO

Pluggable terminal block; 5.08mm pitch; 4-ways; female; for wire 2.50mm2(28-12AWG); wire insertion direction 90� to plug-in direction; p.bronze contacts; brass cage; UL 300V/16A

1,000 : $0.837
500 : $1.048
100 : $1.334
25 : $1.428
1 : $2.143

389

FA10887_TINA-RS

LEDIL

Lens for LED high power; angle: 10 to 15 degrees FWHM; Number of LEDs: 1; Dimensions: round 16mm; Height: 9.7mm; meterial: PMMA; PC; Fastening: tape

2,592 : $1.41
1,008 : $1.446
576 : $1.489
100 : $1.647
10 : $2.387
1 : $3.25

349

1-338088-3

TE Connectivity

Modular Jacks; 1-338088-3; TE CONNECTIVITY; 8; 1.5 A; Black; Black
RoHS : Compliant

1,000 : $1.166
500 : $1.278
100 : $1.435
30 : $1.524
10 : $1.998
1 : $2.2981

349

Pasternack Enterprises US

PE3088LF-36

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 36 inches. BNC Female to BNC Female Cable 36 Inch Length Using RG142 Coax, RoHS., Radio frequency assembly BNC female to BNC female cable 36 inch length using RG142 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC female to BNC female cable 36 inch length using RG142 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a female gender on end 1 and female on end 2. This BNC to BNC cable is a female to female coax assembly, PE3088LF-36, can also be known as a BNC jack to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC jack to BNC jack cable assembly PE3088LF-36 is built with RG142 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC female to BNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC jack to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC female to BNC female cable 36 inch length using RG142 coax, RoHS.

1 : $86.69
25 : $82.36
50 : $78.02
100 : $74.55

756

PE3W08804/HS-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Jack, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to Reverse Polarity SMA Jack Bulkhead Cable 60 Inch Length Using RG142 Coax with HeatShrink., Radio frequency assembly SMA male to reverse polarity SMA jack bulkhead cable 60 inch length using RG142 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to reverse polarity SMA jack bulkhead cable 60 inch length using RG142 coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our SMA to reverse polarity SMA cable assemblies have a male gender on end 1 and jack on end 2. PE3W08804/HS-60 can also be known as a SMA plug to reverse polarity SMA female cable assembly and will be shipped same-day as it is purchased. SMA plug to reverse polarity SMA female cable assembly PE3W08804/HS-60 is built with RG142 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to reverse polarity SMA jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08804/HS-60 can also be used in the other direction and will be reverse polarity SMA jack bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA reverse polarity female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to reverse polarity SMA jack bulkhead cable 60 inch length using RG142 coax with heatshrink.

1 : $201.99
25 : $191.89
50 : $181.79
100 : $173.71

114

PE3W10887-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.2-5, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Plenum 2.2-5 Male to QMA Male Low PIM Cable 24 Inch Length Using SPP-250-LLPL Coax., Radio frequency assembly plenum 2.2-5 male to QMA male low PIM cable 24 inch length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The plenum 2.2-5 male to QMA male low PIM cable 24 inch length using SPP-250-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.2-5 to QMA cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 2.2-5 cable connection on one end and a QMA cable connection on the other. Our low PIM 2.2-5 to QMA cable assembly has a male gender on end 1 and a male on end 2. PE3W10887-24 can also be known as a low PIM 2.2-5 plug to QMA plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 1.25 inches, allowing for a single bend without damaging the cable. Our PE3W10887-24 RF cable has a FEP jacket of 0.280-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 155 degrees C. The corrugated RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 100 dB. Our 2.2-5 male to QMA male cable has a maximum VSWR of 1.4:1. 2.2-5 plug to QMA plug cable assembly PE3W10887-24 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with 2.2-5 to QMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W10887-24 can also be used in the other direction and will be a QMA male to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to QMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to QMA cable assembly for quick shipment worldwide. Variations of 2.2-5 and QMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.2-5 to QMA low PIM RF cable assembly as per your requirements.

1 : $105.99
25 : $100.69
50 : $95.39
100 : $91.15

PE3C100088

Pasternack Enterprises

Key Specifications, Connector 1 Series: MHF1, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, RF Cable Impedance: 50 Ohm. MHF1 to SMA Male Right Angle Cable Assembly Using O.D. 1.13mm Cable., Pasternack’s PE3C100088 MHF1 to right angle SMA male RF cable assembly is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MHF1 to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MHF1 to SMA cable assembly orders will ship the same business day as well. Pasternack RF cable assembly is built with an MHF1 cable connection on one end and a right angle SMA cable connection on the other. PE3C100088 can also be known as an MHF1 to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.052-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The MHF1 to SMA cable from Pasternack is ideal for applications including external antenna connection (Wi-Fi, Bluetooth, LTE, 5G, and GPS receivers), improving signal strength (embedded systems inside metal enclosures), prototyping and development and IoT and embedded systems (drones and robotics). The minimum bend radius for this cable is 0.157 inches, allowing for a single bend without damaging the cable. Our PE3C100088 RF cable has an FEP jacket of 0.052-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. This cable assembly has a typical propagation velocity of 70%. Our MHF1 to right angle SMA male cable has a maximum VSWR of 1.55:1. This single shielded cable assembly has a tinned copper shield layer. The Pasternack MHF1 cable assembly is manufactured with MHF1 to right angle SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C100088 can also be used in the other direction and will be a right angle SMA plug to MHF1 cable assembly if the opposite connectivity is required. This MHF1 to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MHF1 to SMA cable assembly for quick shipment worldwide. Variations of MHF1 and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MHF1 to SMA RF cable assembly as per your requirements.

PE3C0885LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: HN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. HN Male to HN Male Cable Using RG393 Coax with HeatShrink, RoHS. PE3C0885LF/HS is a HN male to HN male cable using RG393 coax. This Pasternack HN male to HN male cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm HN for connector 2. Our male HN to male HN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0885LF/HS HN male to HN male cable assembly is constructed with RG393 coax.

PE3C10088-18

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 3.5mm Male to N Male Right Angle Cable 18 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm male to N male right angle cable 18 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to N male right angle cable 18 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and right angle a type N cable connection on the other. Our a 3.5mm to right angle a type N cable assembly has male gender on end 1 and male on end 2. PE3C10088-18 can also be known as a 3.5mm plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm plug to type N plug cable assembly PE3C10088-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to right angle type N cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10088-18 can also be used in the other direction and will be right angle type N male to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to type N cable assembly for quick shipment worldwide. Variations of 3.5mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to type N RF cable assembly as per your requirements.

1 : $239.99
25 : $227.99
50 : $215.99
100 : $206.39

PE3W08810-12

Pasternack Enterprises

Key Specifications, Connector Series 1: MHV, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MHV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm, Length: 12 inches. MHV Female to MHV Male Cable 12 Inch Length Using RG141 Coax., Radio frequency assembly MHV female to MHV male cable 12 inch length using RG141 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MHV female to MHV male cable 12 inch length using RG141 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MHV to MHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MHV cable connection on one end and MHV cable connection on the other. Our MHV to MHV cable assemblies have a female gender on end 1 and male on end 2. This MHV to MHV cable is a female to male coax assembly, PE3W08810-12, can also be known as a MHV jack to MHV plug cable assembly and will be shipped same-day as it is purchased. MHV jack to MHV plug cable assembly PE3W08810-12 is built with RG141 which is a flexible coax type. The Pasternack flexible MHV cable assembly is manufactured with MHV to MHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 300 MHz maximum frequency MHV female to MHV male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08810-12 can also be used in the other direction and will be MHV male to MHV female cable assembly if the opposite connectivity is required. MHV jack to MHV plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MHV to MHV cable assembly for quick shipment worldwide. Variations of MHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MHV female to MHV male cable 12 inch length using RG141 coax.

1 : $111.99
25 : $106.39
50 : $100.79
100 : $96.31

PE3W08812/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. MCX Jack to MMCX Jack Cable Using RG188 Coax with HeatShrink. PE3W08812/HS is a MCX jack to MMCX jack cable using RG188 coax. This Pasternack MCX jack to MMCX jack cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm MMCX for connector 2. Our jack MCX to jack MMCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08812/HS MCX jack to MMCX jack cable assembly is constructed with RG188 coax.

PE3W08816

Pasternack Enterprises

Key Specifications, Connector Series 1: D-Sub, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: D-Sub, Connector Gender 2: Receptacle, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. D-Sub Plug to D-Sub Receptacle Right Angle Cable Using LMR-195 Coax. PE3W08816 is a D-Sub plug to D-Sub receptacle right angle cable using LMR-195 coax. This Pasternack D-Sub plug to D-Sub receptacle right angle cable assembly uses a 50 Ohm D-Sub for connector 1 and a 50 Ohm D-Sub for connector 2. D-Sub to D-Sub right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug D-Sub to receptacle D-Sub right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08816 D-Sub plug to D-Sub receptacle right angle cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W08825/HS/PH270

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to Mini SMP Female Right Angle Cable Using PE-SR405FLJ Coax with HeatShrink and 270 Deg. Clock. PE3W08825/HS/PH270 is a MCX plug right angle to Mini SMP female right angle cable using PE-SR405FLJ coax. This Pasternack MCX plug right angle to Mini SMP female right angle cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm Mini SMP for connector 2. MCX right angle to Mini SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MCX right angle to female Mini SMP right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W08825/HS/PH270 MCX plug right angle to Mini SMP female right angle cable assembly is constructed with PE-SR405FLJ coax.

PE3W08830LF

Pasternack Enterprises

PE3W08861

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to BNC Female 4 Hole Flange Cable Using PE-C195 Coax. PE3W08861 is a reverse polarity SMA male to BNC female 4 hole flange cable using PE-C195 coax. This Pasternack reverse polarity SMA male to BNC female 4 hole flange cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our reverse polarity male SMA to female BNC 4 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08861 SMA reverse polarity male to BNC female 4 hole flange cable assembly is constructed with PE-C195 coax.

PE3W08898

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using LMR-600 Coax. PE3W08898 is a N male to N male cable using LMR-600 coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08898 N male to N male cable assembly is constructed with LMR-600 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W25088

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. SMA Female to SMA Male Right Angle Cable Using LMR-400-UF Coax. PE3W25088 is a SMA female to SMA male right angle cable using LMR-400-UF coax. This Pasternack SMA female to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25088 SMA female to SMA male right angle cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE36088

Pasternack Enterprises

Teledyne HiRel

CY37512P208-83UMB

Teledyne HiRel

PROGRAMMABLE LOGIC DEVICE, 512 MACROCELL, ELECTRICALLY ALTERABLE, 83 MHZ

Venkel Ltd.

LMCI1608-8N2JT

VENKEL LTD

Low Value Multilayer Chip Inductor;0603;8.2nH;�5%
RoHS : Compliant

348,000

LMCI1608-8N2KT

VENKEL LTD

Low Value Multilayer Chip Inductor;0603;8.2nH;�10%
RoHS : Compliant

348,000

LMCI1608-82NJT

VENKEL LTD

Low Value Multilayer Chip Inductor;0603;82nH;�5%
RoHS : Compliant

8,000

LMCI1608-82NKT

VENKEL LTD

Low Value Multilayer Chip Inductor;0603;82nH;�10%
RoHS : Compliant

8,000

MLF1608-8R2KT

VENKEL LTD

Multilayer Chip Inductor;0603;8.2uH;�10%
RoHS : Compliant

MLF1608-82NMT

VENKEL LTD

Multilayer Chip Inductor;0603;82nH;�20%
RoHS : Compliant

FBC1808-800E

VENKEL LTD

High Current Ferrite Bead;1808;80R
RoHS : Compliant

MLF1608-8R2MT

VENKEL LTD

Multilayer Chip Inductor;0603;8.2uH;�20%
RoHS : Compliant

Vyrian

MC74VHC1G02P5T5G-L22088

onsemi

NOR Gate, AHC/VHC/H/U/V Series, 1-Func, 2-Input, CMOS
RoHS : Compliant

11,739

MAX20088ATPA-VY

Analog Devices (Maxim Integrated)

9,721

LM675T-SL108878

Texas Instruments

9,135

LS1088AXE7MQA

NXP Semiconductors

CMOS, PBGA780
RoHS : Compliant

8,509

SN274088YZFT

Texas Instruments

8,170

2810887

Phoenix Contact

Signal Interfaces
RoHS : Compliant

7,495

MT5C1601EC-20883C

Micron Technology Inc

Standard SRAM, 16KX1, 20ns, CMOS, CQCC20
RoHS : Not Compliant

7,056

MT5C2565C70/883C

Micron Technology Inc

Standard SRAM, 64KX4, 70ns, CMOS, CDIP28
RoHS : Not Compliant

6,413

MAX20088ATPB-VY+T

Analog Devices (Maxim Integrated)

5,290

MT4C4001JC10/883

Micron Technology Inc

RoHS : Not Compliant

5,146

MT5C1009CW-70/883C

Micron Technology Inc

Standard SRAM, 128KX8, 70ns, CMOS, CDIP32
RoHS : Not Compliant

5,117

MT5C6408ECW30/883C

Micron Technology Inc

Standard SRAM, 8KX8, 30ns, CMOS, CQCC32
RoHS : Not Compliant

4,327

MSA-0886-TR1G

Broadcom Limited

RoHS : Compliant

3,474

MT5C6408CW-20883C

Micron Technology Inc

Standard SRAM, 8KX8, 20ns, CMOS, CDIP28
RoHS : Not Compliant

2,538

1300100884

Molex

Cable Assembly
RoHS : Compliant

640

Waytek, Inc.

140886-91

General Cable Technologies Corporation

18GA TXL Violet Cross-Link Automotive Wire XLPE -51C to 125C

500 : $0.1006
1,000 : $0.0846
3,000 : $0.069
6,000 : $0.0631

176,250

19057-0088

Molex

16-14 GA # 6 Ring Terminal Blue Nylon Brass Extra Sleeve

50 : $0.1732
200 : $0.164
500 : $0.1527
1,000 : $0.1465

19,625

19118-0088

Molex

12-10 GA #10 Spade Terminal Non-Insulated
RoHS : Compliant

50 : $0.2683
200 : $0.2439
500 : $0.2177
1,000 : $0.197
5,000 : $0.1879

8,762

282088-1

TE Connectivity

4 Position Plug Housing AMP Superseal 1.5mm
RoHS : Compliant

1 : $1.24
10 : $1.16
20 : $1.14
50 : $1.1
100 : $1.07
200 : $1.05

845

380-08810

Carling Technologies

Dress Knurled Nickel Face Nut 15/32" for Toggle Switches

10 : $1.7029
50 : $1.5159
100 : $1.3739
200 : $1.3288
500 : $1.2836
1,000 : $1.2386

796

380-08811

Carling Technologies

Black Knurled Dress Face Nut 15/32" Threads FOR TOGGLE SWITCHES

10 : $0.6213
50 : $0.5999
100 : $0.5827
200 : $0.5784
500 : $0.5699
1,000 : $0.5613

785

0888250.U-2M8

Littelfuse Inc

High Performance 120V MEGA Fuse, 250A
RoHS : Compliant

1 : $8.97
50 : $7.67
100 : $7.3
200 : $6.89
500 : $6.63

476

0888200.U-2M8

Littelfuse Inc

High Performance 120V MEGA Fuse, 200A
RoHS : Compliant

1 : $8.09
50 : $6.85
100 : $6.49
200 : $6.1
500 : $5.85

317

0888450.U-2M8

Littelfuse Inc

High Performance 120V MEGA Fuse, 450A
RoHS : Compliant

1 : $9.95
50 : $8.59
100 : $8.19
200 : $7.77
500 : $7.49

317

0888060.U-2M8

Littelfuse Inc

High Performance 120V MEGA Fuse, 60A
RoHS : Compliant

1 : $6.52
50 : $5.46
100 : $5.14

256

0888300.U-2M8

Littelfuse Inc

High Performance 120V MEGA Fuse, 300A
RoHS : Compliant

1 : $8.09
50 : $6.85
100 : $6.46
200 : $6.1
500 : $5.85

209

0888650.U-2M8

Littelfuse Inc

High Performance 120V MEGA Fuse, 650A
RoHS : Compliant

1 : $6.73
50 : $5.49
100 : $5.13
200 : $4.74
500 : $4.49

55088

Cole Hersee

Cole Hersee 55088 standard heavy-duty metal toggle switch is an SPDT On-Off-(On) switch rated 25A at 12VDC, 15A at 24VDC, and 10A at 36VDC. It features three screw terminals, silver contacts, and a standard 11/16" handle.

1 : $15.43
10 : $13.77
50 : $12.67
100 : $12.19
200 : $11.85
500 : $11.51

880088

Cole Hersee

High-Amp SPST Remote HD Relay 24V 300A Continuous Duty DTM6 Battery Switch

1 : $327.9
5 : $314.49
10 : $302.56
25 : $280.21

110-88004

HellermannTyton

The HellermannTyton 110-80000 EVO 9 is a heavy-duty cable tie installation tool designed for precise tensioning and flush cutting of larger nylon cable ties. Compatible with 50250 lb. ties and widths up to 13.5 mm (0.53"), it features 33 adjustable tension settings and a quick-adjust override for consistent, repeatable performance. Engineered with ergonomic Tension-Lock-Cut (TLC) technology, it minimizes kickback and operator fatigue while ensuring clean, flush cuts at the selected tension. Built with durable materials and a lightweight, glass fiberreinforced housing, it is ideal for automotive, industrial, and heavy-duty cable management applications.

1 : $572.23
10 : $536.94

Win Source Electronics

SY8088IAAC

Silergy Corporation

12,880 : $0.0233
10,290 : $0.0243
7,940 : $0.0252
5,540 : $0.0271
3,560 : $0.0281
1,670 : $0.03

375,000

MAX20088ATPA/VY+T

Analog Devices Inc

IC CURRENT SWITCH 8% 20TQFN
RoHS : Compliant

131 : $2.5694
98 : $2.8659
76 : $2.9646
55 : $3.0635
36 : $3.1623
15 : $3.8541

60,870

ISO3088DWRG4

Texas Instruments

DG ISO 2.5KV RS422/RS485 16SOIC
RoHS : Compliant

124 : $2.4228
100 : $2.5213
77 : $2.6197
54 : $2.8167
35 : $2.9152
17 : $3.1122

54,700

SN65HVD3088EDGKG4

Texas Instruments

IC TRANSCEIVER HALF 1/1 8VSSOP / 1/1 Transceiver Half RS422, RS485 8-VSSOP
RoHS : Compliant

275 : $1.1098
220 : $1.1549
170 : $1.2
120 : $1.2903
75 : $1.3354
40 : $1.4256

24,000

APW7088QAE-TRG

Anpec Electronics Corporation

Two-Phase Buck PWM Controller with Integrated MOSFET Drivers

585 : $0.6654
470 : $0.6931
360 : $0.7207
250 : $0.7762
165 : $0.8038
80 : $0.8593

19,600

DAC088S085CIMT/NOPB

Texas Instruments

IC DAC 8BIT OCTAL R-R 16-TSSOP / DAC 8-CH Resistor-String 8-bit 16-Pin TSSOP Tube
RoHS : Compliant

69 : $4.3854
52 : $4.8914
40 : $5.0601
29 : $5.2288
19 : $5.3974
8 : $6.5781

18,100

MSA-0886-TR1G

Broadcom Limited

RF Amp Single MMIC Amp 6GHz 9.4V 4-Pin Case 86 T/R / IC AMP MMIC BIPOLAR 65MA 86-SMD
RoHS : Compliant

164 : $2.0562
131 : $2.1398
101 : $2.2233
71 : $2.3905
46 : $2.4741
22 : $2.6413

15,040

ACT4088US-T

Active-Semi

28V, 1.5A, 1.4MHz Step-Down DC/DC Converter in SOT23-6

77 : $3.9098
58 : $4.361
45 : $4.5113
33 : $4.6617
21 : $4.8121
9 : $5.8647

15,000

ADC088S022CIMT/NOPB

Texas Instruments

IC ADC 8BIT SAR 16TSSOP
RoHS : Compliant

157 : $2.1528
117 : $2.4012
91 : $2.4839
66 : $2.5667
43 : $2.6496
18 : $3.2291

11,580

ADC088S022CIMTX/NOPB

Texas Instruments

ADC 8BIT 8CH 50-200KSPS 16-TSSOP
RoHS : Compliant

173 : $1.741
129 : $1.9419
100 : $2.0089
73 : $2.0758
47 : $2.1428
20 : $2.6115

10,000

MGA-30889-BLKG

Broadcom Limited

Flat Gain High Linearity Gain Block | IC AMP GP 40MHZ-2.6GHZ SOT89-3
RoHS : Compliant

8 : $44.9646
6 : $50.1529
5 : $51.8823
4 : $53.6117
3 : $55.3411
1 : $67.447

8,670

282088-1

TE Connectivity

CONN PLUG HSG 4POS 6.00MM / 4 Rectangular Connectors - Housings Plug Black 0.236" (6.00mm)
RoHS : Compliant

1,060 : $0.2831
795 : $0.3157
615 : $0.3266
445 : $0.3375
290 : $0.3484
120 : $0.4246

6,417

IPD088N06N3 G

Infineon Technologies AG

MOSFET N-CH 60V 50A TO252-3

345 : $0.8797
255 : $0.9813
200 : $1.0151
145 : $1.0489
95 : $1.0828
40 : $1.3196

4,320

DAC088S085CISQ

National Semiconductor Corporation

8-Bit Micro Power OCTAL Digital-to-Analog Converter with Rail-to-Rail Outputs
RoHS : Not Compliant

47 : $6.3945
36 : $7.1323
28 : $7.3782
20 : $7.6242
13 : $7.8701
6 : $9.5917

3,657

LPC4088FET208

Nexperia

32-bit ARM Cortex-M4 MCU;

3 : $127.0677
2 : $141.7294
1 : $146.6166

126

088G-S08-R Verteiler

Link URL