103L-18-AF5-R Price, Verteiler, Stock

Ethernet Cables / Networking Cables EtherNet/IP, double-ended cord set, M12 male to RJ45 male, 4-pin, D-coding, 24 AWG TPE cable, stranded/shielded, 2 twisted bonded pairs with teal jacket.

1 : $164.99

21033836405

HARTING Technology Group

Circular Metric Connectors M12 PANEL FEEDTHRU D-CODED SHIELDED

1 : $149.99

21038211805

HARTING Technology Group

Circular Metric Connectors M12 CRIMP SLIM 8POL A-CODED MALE
RoHS : Compliant

1 : $100.79

21038811430

HARTING Technology Group

Circular Metric Connectors M12 PUSHPULL 4-POLE D-CODED MALE
RoHS : Compliant

1 : $79.99

3548S-1BA-103B

Bourns Inc

Precision Potentiometers PRECISION POT-7/8" 22MM DIA 5T WW
RoHS : Compliant

1 : $84.99

10361030001

HARTING Technology Group

Heavy Duty Power Connectors Han-Kit-Ex3A Screw Terminal
RoHS : Compliant

1 : $224.99

083161-1-03N

Grayhill Inc

Rotary Switches 08A36-01-1-03N
RoHS : Compliant

1 : $246.49

09A90-01-1-03N

Grayhill Inc

Rotary Switches 09A90-01-1-03N
RoHS : Compliant

1 : $154.99

61030000103

HARTING Technology Group

Crimpers / Crimping Tools INDUCOM OUTILLAGE INSERT

1 : $689.2

0935 253 103/15 M

Lumberg Connect GmbH

Sensor Cables / Actuator Cables

1 : $479.98

21 03 821 2530

HARTING Technology Group

Circular Metric Connectors M12 PUSHPULL 5POLE A-CODED FEMALE

1 : $109.99

Pasternack Enterprises US

PE3W10300-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 75 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length, Max: 60 inches. 75 Ohm SMB Plug Right Angle to 75 Ohm SMB Plug Cable 60 Inch Length Using 75 Ohm RG59 Coax., Radio frequency assembly 75 Ohm SMB plug right angle to 75 Ohm SMB plug cable 60 inch length using 75 Ohm RG59 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm SMB plug right angle to 75 Ohm SMB plug cable 60 inch length using 75 Ohm RG59 coax, SMB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMB cable connection on one end and SMB cable connection on the other. Our right angle SMB to SMB cable assemblies have a plug gender on end 1 and plug on end 2. PE3W10300-60 can also be known as a right angle SMB male to SMB male cable assembly and will be shipped same-day as it is purchased. SMB male to SMB male cable assembly PE3W10300-60 is built with RG59 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with right angle SMB to SMB cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this SMB right angle plug to SMB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10300-60 can also be used in the other direction and will be SMB plug to right angle SMB plug cable assembly if the opposite connectivity is required. SMB right angle male to SMB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm SMB plug right angle to 75 Ohm SMB plug cable 60 inch length using 75 Ohm RG59 coax.

1 : $163.99
25 : $155.79
50 : $147.59
100 : $141.03

PE3C10397-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240-FR, RF Cable Type: TCOM-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Fire Rated N Male to N Male Low Loss Cable 24 Inch Length Using TCOM-240-FR Coax With Times Microwave Components., Radio frequency assembly fire rated N male to N male low loss cable 24 inch length using TCOM-240-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to N male low loss cable 24 inch length using TCOM-240-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss a type N to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10397-24 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10397-24 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. Type N plug to type N plug cable assembly PE3C10397-24 is built with TCOM-240-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements.

1 : $107.99
25 : $103.67
50 : $100.43
100 : $98.27

PE3CA1036-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P141EAM, RF Cable Type: PE-141FLEX, RF Cable Impedance: 50 Ohm, Length: 19.69 inches. SMA Male to SMA Male Right Angle Cable 50 cm Length Using PE-141FLEX Coax, RoHS., Radio frequency assembly SMA male to SMA male right angle cable 50 cm length using PE-141FLEX coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable 50 cm length using PE-141FLEX coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3CA1036-50CM, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3CA1036-50CM is built with PE-141FLEX which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 27 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1036-50CM can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 50 cm length using PE-141FLEX coax, RoHS.

1 : $117.99
25 : $112.09
50 : $106.19
100 : $101.47

PE2CP1038

Pasternack Enterprises

1 : $94.99
10 : $91.19
25 : $87.39

PE3C10345

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240-FR, RF Cable Type: TCOM-240-FR, RF Cable Impedance: 50 Ohm. Fire Rated N Male to N Male Low PIM Cable Using TCOM-240-FR Coax With Times Microwave Components., Radio frequency assembly fire rated N male to N male low PIM cable using TCOM-240-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated N male to N male low PIM cable using TCOM-240-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low PIM a type N to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10345 can also be known as a low PIM type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10345 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. Type N plug to type N plug cable assembly PE3C10345 is built with TCOM-240-FR which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with type N to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.

PE3C10336-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 4.3-10 Male to N Male Low PIM Cable 12 Inch Length Using TCOM-240 Coax With Times Microwave Components., Radio frequency assembly 4.3-10 male to N male low PIM cable 12 inch length using TCOM-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to N male low PIM cable 12 inch length using TCOM-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM a 4.3-10 to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10336-12 can also be known as a low PIM 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10336-12 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. 4.3-10 plug to type N plug cable assembly PE3C10336-12 is built with TCOM-240 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10336-12 can also be used in the other direction and will be type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements.

1 : $135.99
25 : $130.55
50 : $126.47
100 : $123.75

PE3C10355-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400-FR, RF Cable Type: TCOM-400-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated 4.3-10 Male to 4.3-10 Male Low PIM Cable 48 Inch Length Using TCOM-400-FR Coax With Times Microwave Components., Radio frequency assembly fire rated 4.3-10 male to 4.3-10 male low PIM cable 48 inch length using TCOM-400-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated 4.3-10 male to 4.3-10 male low PIM cable 48 inch length using TCOM-400-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 4.3-10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our low PIM a 4.3-10 to a 4.3-10 cable assembly has male gender on end 1 and male on end 2. PE3C10355-48 can also be known as a low PIM 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10355-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. 4.3-10 plug to 4.3-10 plug cable assembly PE3C10355-48 is built with TCOM-400-FR which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low PIM RF cable assembly as per your requirements.

1 : $197.99
25 : $190.07
50 : $184.13
100 : $180.17

PE3C1037-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to N Male Right Angle Low Loss Cable 12 Inch Length Using PE-P142LL Coax, RoHS., Radio frequency assembly SMA male to N male right angle low loss cable 12 inch length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to N male right angle low loss cable 12 inch length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle type N cable connection on the other. Our low loss SMA to right angle N type cable assemblies have a male gender on end 1 and male on end 2. This SMA to N type cable is a male to male coax assembly, PE3C1037-12, can also be known as a low loss SMA plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3C1037-12 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1037-12 can also be used in the other direction and will be right angle N type male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male right angle low loss cable 12 inch length using PE-P142LL coax, RoHS.

1 : $373.99
25 : $355.29
50 : $336.59

PE3C1039/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMA Female to SMP Female Right Angle Cable Using R. PE3C1039/HS is a SMA female to SMP female right angle cable using RG178 coax. This Pasternack SMA female to SMP female right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMP for connector 2. SMA to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA to female SMP right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1039/HS SMA female to SMP female right angle cable assembly is constructed with RG178 coax.

PE3C10390

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-195-FR, RF Cable Type: TCOM-195-FR, RF Cable Impedance: 50 Ohm. Fire Rated N Male to TNC Male Low Loss Cable Using TCOM-195-FR Coax With Times Microwave Components., Radio frequency assembly fire rated N male to TNC male low loss cable using TCOM-195-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to TNC male low loss cable using TCOM-195-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a TNC cable connection on the other. Our low loss a type N to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10390 can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10390 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Type N plug to TNC plug cable assembly PE3C10390 is built with TCOM-195-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to TNC cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10390 can also be used in the other direction and will be TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements.

PE3W10309

Pasternack Enterprises

Key Specifications, Connector Series 1: 1.6/5.6, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 75 Ohm, Connector Series 2: 1.6/5.6, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm. 75 Ohm 1.6/5.6 Jack Right Angle Bulkhead to 75 Ohm 1.6/5.6 Jack Right Angle Bulkhead Cable Using 75 Ohm RG187 Coax. PE3W10309 is a 1.6/5.6 jack right angle bulkhead to 1.6/5.6 jack right angle bulkhead cable using RG187 coax. This Pasternack 1.6/5.6 jack right angle bulkhead to 1.6/5.6 jack right angle bulkhead cable assembly uses a 75 Ohm 1.6/5.6 for connector 1 and a 75 Ohm 1.6/5.6 for connector 2. 1.6/5.6 right angle to 1.6/5.6 right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack 1.6/5.6 right angle bulkhead to jack 1.6/5.6 right anglebulkhead cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W10309 1.6/5.6 jack right angle bulkhead to 1.6/5.6 jack right angle bulkhead cable assembly is constructed with RG187 coax.

PE3W10354

Pasternack Enterprises

Key Specifications, Connector Series 1: Mini UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Mini UHF Male to Reverse Polarity BNC Female Bulkhead Cable Using LMR-100 Coax. PE3W10354 is a Mini UHF male to reverse polarity BNC female bulkhead cable using LMR-100A coax. This Pasternack Mini UHF male to reverse polarity BNC female bulkhead cable assembly uses a 50 Ohm Mini UHF for connector 1 and a 50 Ohm BNC for connector 2. Our male Mini UHF to reverse polarity female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10354 Mini UHF male to BNC reverse polarity female bulkhead cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W10373-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: QMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. QMA Male to MMCX Plug Cable 24 Inch Length Using RG174 Coax., Radio frequency assembly QMA male to MMCX plug cable 24 inch length using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The QMA male to MMCX plug cable 24 inch length using RG174 coax, QMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QMA cable connection on one end and MMCX cable connection on the other. Our QMA to MMCX cable assemblies have a male gender on end 1 and plug on end 2. This QMA to MMCX cable is a male to plug coax assembly, PE3W10373-24, can also be known as a QMA plug to MMCX male cable assembly and will be shipped same-day as it is purchased. QMA plug to MMCX male cable assembly PE3W10373-24 is built with RG174 which is a flexible coax type. The Pasternack flexible QMA cable assembly is manufactured with QMA to MMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency QMA male to MMCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10373-24 can also be used in the other direction and will be MMCX plug to QMA male cable assembly if the opposite connectivity is required. QMA plug to MMCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to MMCX cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QMA male to MMCX plug cable 24 inch length using RG174 coax.

1 : $109.99
25 : $104.49
50 : $98.99
100 : $94.59

PE3W10396/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Female to N Male Cable Using LMR-240-UF Coax with HeatShrink. PE3W10396/HS is a reverse polarity TNC female to N male cable using LMR-240-UF coax. This Pasternack reverse polarity TNC female to N male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. Our reverse polarity female TNC to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10396/HS TNC reverse polarity female to N male cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W18103

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to MCX Plug Right Angle Cable Using RG174 Coax. PE3W18103 is a BNC male right angle to MCX plug right angle cable using RG174 coax. This Pasternack BNC male right angle to MCX plug right angle cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm MCX for connector 2. BNC right angle to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to plug MCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18103 BNC male right angle to MCX plug right angle cable assembly is constructed with RG174 coax.

TE Connectivity

5-103673-2

TE Connectivity

3 MTE HDR SRRA LATCH W/HLDWN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 3 Number of Rows: 1 PCB Mount Header Right Angle Wire-to-Board 3 | PCB Header & Receptacle | Part Number: 5-103673-2 | Internal Number: 5-103673-2 | TE Connectivity
RoHS : Compliant

2,500 : $1.15
1,000 : $1.18
500 : $1.21
250 : $1.24
100 : $1.27
50 : $1.3
25 : $1.33
10 : $1.36
1 : $1.39

6,945

5-103634-4

TE Connectivity

05 MTE HDR SRRA LATCH.100CL LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 5 Number of Rows: 1 PCB Mount Header Right Angle Wire-to-Board 5 | PCB Header & Receptacle | Part Number: 5-103634-4 | Internal Number: 5-103634-4 | TE Connectivity
RoHS : Compliant

5,000 : $1.43
2,500 : $1.47
1,000 : $1.5
500 : $1.54
250 : $1.57
100 : $1.61
50 : $1.64
25 : $1.68
10 : $1.71
1 : $1.75

5,378

5-103944-1

TE Connectivity

8X2 MTE SHRD PIN SR POL .100CL Number of Positions: 2 Connector & Housing Type: Plug Connector Product Type: Connector Assembly Mating Retention: With Mating Retention Type: Latching Feature Standard Rectangular Connector | 2 Plug Connector Assembly With | Part Number: 5-103944-1 | Internal Number: 5-103944-1 | TE Connectivity
RoHS : Compliant

2,500 : $1.64
1,000 : $1.69
500 : $1.73
250 : $1.77
100 : $1.82
50 : $1.86
25 : $1.91
10 : $1.95
1 : $2.0

3,371

103735-1

TE Connectivity

02 MTE HDR SRST LATCH .100CL Part Number: 103735-1 | Internal Number: 103735-1 | TE Connectivity
RoHS : Compliant

2,500 : $1.38
1,000 : $1.41
500 : $1.45
250 : $1.49
100 : $1.52
50 : $1.56
25 : $1.6
10 : $1.64
1 : $1.67

2,587

103361-6

TE Connectivity

08 MODII HDR SRRA SHRD .100CL Part Number: 103361-6 | Internal Number: 103361-6 | TE Connectivity
RoHS : Compliant

5,000 : $3.53
2,500 : $3.62
1,000 : $3.71
500 : $3.79
250 : $3.88
100 : $3.97
50 : $4.05
25 : $4.14
10 : $4.22
1 : $4.31

1,462

1-2371035-1

TE Connectivity

2POS,DIA 4MM,SOC HSG ASSY,SLD,COD A Nominal Voltage Architecture: 12 V Number of Positions: 2 Connector & Housing Type: Housing for Female Terminals Connector System: Cable-to-Panel Mating Tab Width: 1.2 mm Automotive Housing | 12 V Housing for Female Terminals Cable-to-Panel | Part Number: 1-2371035-1 | Internal Number: 1-2371035-1 | 1.2 mm | TE Connectivity
RoHS : Compliant

1 : $22.36

1,192

5-103634-5

TE Connectivity

06 MTE HDR SRRA LATCH.100CL LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 6 Number of Rows: 1 PCB Mount Header Right Angle Wire-to-Board 6 | PCB Header & Receptacle | Part Number: 5-103634-5 | Internal Number: 5-103634-5 | TE Connectivity
RoHS : Compliant

2,500 : $1.85
1,000 : $1.9
500 : $1.95
250 : $2.0
100 : $2.06
50 : $2.11
25 : $2.16
10 : $2.21
1 : $2.26

982

1-103735-1

TE Connectivity

12 MTE HDR SRST LATCH .100CL Part Number: 1-103735-1 | Internal Number: 1-103735-1 | TE Connectivity
RoHS : Compliant

500 : $3.94
250 : $4.08
100 : $4.22
50 : $4.35
25 : $4.49
10 : $4.63
1 : $4.76

568

103311-1

TE Connectivity

010 LOPRO HDR RA 30DP Ribbon Cable Connector | Part Number: 103311-1 | Internal Number: 103311-1 | TE Connectivity
RoHS : Compliant

1,000 : $1.7
500 : $1.74
250 : $1.8
100 : $1.86
50 : $1.91
1 : $2.1

496

5103310-3

TE Connectivity

A/L LOW PRO HDR 16P RA BLACK Connector System: Wire-to-Board Number of Positions: 16 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 16 2.54 mm .1" | Ribbon Cable Connector | Part Number: 5103310-3 | Internal Number: 5103310-3 | TE Connectivity
RoHS : Compliant

1,000 : $2.11
500 : $2.17
250 : $2.23
100 : $2.31
50 : $2.38
1 : $2.61

339

6-103639-5

TE Connectivity

16 MTE HDR SRST LATCH .100CL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 16 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 16 | PCB Header & Receptacle | Part Number: 6-103639-5 | Internal Number: 6-103639-5 | TE Connectivity
RoHS : Compliant

250 : $4.06
100 : $4.22
50 : $4.38
25 : $4.54
10 : $4.71
1 : $4.87

200

TLSTNS1103SD

TE Connectivity

LS T SNAP PLUNGER CENTRAL M 4A 1NO + 1NC Push Button Switch Product Type: Limit Switch Illuminated: Without Operating Function: 1 NO & 1 NC Configuration (Pole-Throw): Single Pole - Single Throw Number of Actuators: Single Limit Switch Without 1 & 1 NC Single Pole - Single Throw | Alcoswitch Limit Switch | Part Number: TLSTNS1103SD | Internal Number: 2-2483582-5 | TE Connectivity
RoHS : Compliant

50 : $53.01
25 : $56.13
10 : $59.25
1 : $62.37

T1250103120-000

TE Connectivity

H10B-TSBS-M20 Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1250103120-000 | Internal Number: T1250103120-000 | TE Connectivity
RoHS : Compliant

25 : $32.21
10 : $34.69
1 : $37.17

601036-000

TE Connectivity

D-602-45 Contact Type: Socket Wire Size: 26 – 32 AWG Wire Size: .14 – .03 mm² Contact Size: Size 16 Compatible With Wire & Cable Type: Coaxial Socket 26 – 32 AWG .14 – .03 mm² Size 16 | Solder Contacts For Mil-Spec And Shielded Applications | Part Number: 601036-000 | Internal Number: 601036-000 | Alias Number: 9-1194755-7 | TE Connectivity
RoHS : Compliant

1 : $29.96

5-103167-4

TE Connectivity

14 MODII HDR DRRA SHRD LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 14 Number of Rows: 2 PCB Mount Header Right Angle Wire-to-Board 14 | PCB Header & Receptacle | Part Number: 5-103167-4 | Internal Number: 5-103167-4 | TE Connectivity
RoHS : Compliant

5,000 : $4.69
2,500 : $4.81
1,000 : $4.92
500 : $5.04
250 : $5.15
100 : $5.27
50 : $5.38
25 : $5.5
10 : $5.61
1 : $5.72

Teledyne HiRel

M38510/30102BDA

Teledyne HiRel

DUAL POSITIVE-EDGE-TRIGGERED D FLIP-FLOPS WITH PRESET, CLEAR AND COMPLEMENTARY OUTPUTS

M38510/30902B2A

Teledyne HiRel

DATA SEL/MULTIPLEXER, DUAL 4-INPUT
RoHS : Not Compliant

M38510/31002BXA

Teledyne HiRel

AND GATE, TRIPLE 3-INPUT, WITH OPEN-COLLECTOR INPUTS
RoHS : Not Compliant

M38510/31004BBA

Teledyne HiRel

AND GATE, QUAD 2-INPUT
RoHS : Not Compliant

M38510/32403B2A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/33501B2A

Teledyne HiRel

OR GATE, QUAD 2-INPUT
RoHS : Not Compliant

M38510/34104B2A

Teledyne HiRel

FLIP-FLOP, D-TYPE, 4-BIT
RoHS : Not Compliant

M38510/35002B2A

Teledyne HiRel

MULTIPLEXER, QUAD 2-INPUT, WTORAGE
RoHS : Not Compliant

M38510/10103BGA

Teledyne HiRel

OP AMP, GENERAL PURPOSE
RoHS : Not Compliant

M38510/30402BAA

Teledyne HiRel

AND-OR-INVERT GATE
RoHS : Not Compliant

M38510/31005BAA

Teledyne HiRel

AND GATE, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS
RoHS : Not Compliant

M38510/31901BFA

Teledyne HiRel

M38510/32401BRA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/33001BAA

Teledyne HiRel

NAND GATE, QUAD 2-INPUT
RoHS : Not Compliant

M38510/34501BCA

Teledyne HiRel

EXCLUSIVE-OR GATE, QUAD 2-INPUT
RoHS : Not Compliant

Venkel Ltd.

TFCR0402-16W-E-2103DT-1K

VENKEL LTD

Thin Film CR;0402;1/16W;�25PPM;210K;�0.5%
RoHS : Compliant

90,000

SWCR0805-BK-103MT

VENKEL LTD

Surge Withstanding CR;0805;2/5W;�100PPM;10K;�20%
RoHS : Compliant

SWCR1206-WK-103JT

VENKEL LTD

Surge Withstanding CR;1206;3/4W;�100PPM;10K;�5%
RoHS : Compliant

PWCR0805-RK-103JT

VENKEL LTD

Pulse Withstanding CR;0805;1/8W;�100PPM;10K;�5%
RoHS : Compliant

PWCR0805-TK-2103FT

VENKEL LTD

Pulse Withstanding CR;0805;1/4W;�100PPM;210K;�1%
RoHS : Compliant

PWCR1206-UK-9103FT

VENKEL LTD

Pulse Withstanding CR;1206;1/3W;�100PPM;910K;�1%
RoHS : Compliant

TFCR0603-10W-K-1103FT-1K

VENKEL LTD

Thin Film CR;0603;1/10W;�100PPM;110K ;�1%
RoHS : Compliant

TFCR0805-10W-C-2103FT

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;210K ;�1%
RoHS : Compliant

TFCR0805-10W-E-9103FT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�25PPM;910K;�1%
RoHS : Compliant

TFCR1206-4W-K-9103CT-1K

VENKEL LTD

Thin Film CR;1206;1/4W;�100PPM;910K;�0.25%
RoHS : Compliant

TFCR1206-8W-C-2103FT-1K

VENKEL LTD

Thin Film CR;1206;1/8W;�50PPM;210K ;�1%
RoHS : Compliant

TFCR1210-4W-E-5103FT-1K

VENKEL LTD

Thin Film CR;1210;1/4W;�25PPM;510K;�1%
RoHS : Compliant

TFCR2010-4W-C-2103FT-1K

VENKEL LTD

Thin Film CR;2010;1/4W;�50PPM;210K ;�1%
RoHS : Compliant

TFCR2010-4W-K-2103CT

VENKEL LTD

Thin Film CR;2010;1/4W;�100PPM;210K ;�0.25%
RoHS : Compliant

TFCR2010-4W-K-9103CT-1K

VENKEL LTD

Thin Film CR;2010;1/4W;�100PPM;910K;�0.25%
RoHS : Compliant

Waytek, Inc.

50-84-1030

Molex

Connector Plug MLX 3 Contacts 2.13 MM Molex 50-84-1030 REPLACED 38103 TYCO 1-480700-0
RoHS : Compliant

50 : $0.1923
200 : $0.1594
500 : $0.1403
1,000 : $0.1238
5,000 : $0.1184

75,606

643241039

Molex

CP Terminal 2.8 Sn-1 to 2sqmm Loose disc way, no repl

20 : $0.3157
200 : $0.2986
500 : $0.278
1,000 : $0.2677

11,855

31030GR

FTZ Industries

24-22 Ga Green Butt Connector Crimp & Heat Shrink 90C 600V *Disc Ven*

25 : $0.6877
50 : $0.6124
100 : $0.5559
200 : $0.537
500 : $0.5205
1,000 : $0.4993

5,901

19221-0384

Molex

6GA Copper Eyelet 3/8" Stud
RoHS : Compliant

20 : $0.5808
50 : $0.5194
100 : $0.4707
200 : $0.4558
500 : $0.4388
1,000 : $0.4219

3,710

192210395

Molex

1GA Copper Eyelet 1/2" Stud
RoHS : Compliant

10 : $2.0701
50 : $1.8382
100 : $1.7222
200 : $1.656
500 : $1.5897
1,000 : $1.5069

1,183

WTU-110-38LC-BULK

NSPA

Non-Insulated Long Neck Ring Terminal, 12-10 Ga, #3/8 Stud

20 : $0.5876
50 : $0.5236
100 : $0.4751
200 : $0.4595
500 : $0.4441
1,000 : $0.4266

238

7010351703

3M EPS-300 heat shrink tubing is red polyolefin tubing with a 1/2" size for insulating and protecting wire, terminals, and splices. Its flexible thin-wall construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

1 : $10.97
10 : $10.55
50 : $10.22
100 : $9.66
500 : $9.33

153

684-1251-032-02

Trombetta

Sealed 12V DC Contactor Continuous Duty, L-Bracket Silver Contacts

1 : $40.59
5 : $36.25
10 : $33.83
50 : $31.9
100 : $30.45
200 : $29.0

684-1261-032-02

Trombetta

Sealed 12V DC Contactor Continous Duty, Curved L-Bracket Silver Contacts

1 : $41.08
5 : $36.68
10 : $34.23
50 : $32.28
100 : $30.8
200 : $29.34

211036-0002

Unity Manufacturing Co Ltd

6" Black Post-Mount Spotlight Unity 211036-0002 LED 30 W 12V 215,000 CANDLE 50,000 HOURS

1 : $359.16
5 : $342.43
10 : $325.68

211030-0002

Unity Manufacturing Co Ltd

6" Black Post-Mount Spotlight Unity 211030-0002 H3 100W Bulb 245,000 CANDLE 100 HRS 47858

1 : $203.67
5 : $195.36
10 : $188.08
25 : $177.69

64001-0300

Molex

Premium Grade Hand Crimp Tool Insulated Terminals 22-10 Ga disc way, no repl
RoHS : Not Compliant

1 : $1,019.7785
10 : $958.997

04981038HXFC

Littelfuse Inc

Flex-Midi Fuse Holder 200A 32V -40C To 125C 46390
RoHS : Compliant

1 : $12.28
10 : $11.18
50 : $10.3
100 : $9.48
200 : $8.82
500 : $8.27

7010398066

3M 7010398066 Temflex 1776 Series black vinyl electrical tape is a general-purpose insulating tape built for wire marking, harnessing, and electrical protection. Its flexible vinyl construction, pressure-sensitive adhesive, and black finish make it a practical choice for everyday maintenance and repair work.

3 : $3.5798
10 : $3.4394
50 : $3.3166
100 : $2.8252
200 : $2.7199
500 : $2.6322

643241039

Molex

CP Terminal 2.8 Sn-1 to 2sqmm Reel (2,500 pcs per reel )

2,500 : $0.1933
12,500 : $0.1857