| Datenblatt-Suchmaschine für elektronische Bauteile |
|
1075-R36 Verteiler |
| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty. BuyNow | |
![]() TME | UE36A10752000T | Amphenol Corporation | Connector: RJ45; plug; data transfer; gold-plated; soldering |
| 900 | |
| 1075 | Keystone Electronics Corp | Holder; AAA,R03; Batt.no: 1; PCB,THM; for PCB; polyamide; plastic |
| 50 | ||
| 05071075001 | Wera | Screwdriver bit: hex key; Hex Plus; HEX 5mm; 1/4"; TORSION |
| 14 | ||
| 05021075001 | Wera | Wrench: hex key; Hex Plus; HEX 12mm; Overall len: 125mm; steel |
| 8 | ||
| 226108019-00610754 | Waldmann Lighting | Holder; Application: for lamps; black |
| 8 | ||
| 26031075 | WERMA SIGNALTECHNIK GMBH + CO KG | Signaller: lighting; continuous light,blinking light; orange |
| 3 | ||
| 10901075 | WERMA SIGNALTECHNIK GMBH + CO KG | Signaller: sound; 22mm; Ø22.5mm; IP65; 24VDC; 24VAC; -20÷50°C |
| 1 | ||
| 03501075 | Stahlwille Tools | Wrench tip; flare nut wrench,crowfoot; Spanner-inch: 2 3/16" |
| 0 | ||
| 10-107.54X003.53 X-RING NBR | Oring Uszczelnienia Techniczne | X-ring washer; NBR caoutchouc; Thk: 3.53mm; Øint: 107.54mm |
| 0 | ||
| 1771 075 10 | Technokabel SA | Wire; JZ; YSLCY-JZ; 7G1.5mm2; shielded,tinned copper braid; PVC |
| 0 | ||
| 26011075 | WERMA SIGNALTECHNIK GMBH + CO KG | Signaller: lighting; continuous light,blinking light; red; IP66 |
| 0 | ||
| 26021075 | WERMA SIGNALTECHNIK GMBH + CO KG | Signaller: lighting; continuous light,blinking light; green |
| 0 | ||
| 26041075 | WERMA SIGNALTECHNIK GMBH + CO KG | Signaller: lighting; continuous light,blinking light; white |
| 0 | ||
| 26051075 | WERMA SIGNALTECHNIK GMBH + CO KG | Signaller: lighting; continuous light,blinking light; blue; IP66 |
| 0 | ||
TPS7A11075PYKAR![]() | Texas Instruments | IC: voltage regulator; LDO,fixed; 0.75V; 0.5A; DSBGA5; SMD; TPS7A11 RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | NCP81075DR2G | onsemi | - Tape and Reel (Alt: NCP81075DR2G) RoHS : Compliant | 590,000 | ||
| CRCW1210750RFKEA | Vishay Intertechnologies | - Tape and Reel (Alt: CRCW1210750RFKEA) RoHS : Compliant |
| 20,000 | ||
| NCP81075MNTXG | onsemi | - Tape and Reel (Alt: NCP81075MNTXG) RoHS : Compliant |
| 16,000 | ||
| ST110-75T2KI | Vishay Intertechnologies | - Bulk (Alt: ST110-75T2KI) RoHS : Not Compliant |
| 148 | ||
| NCP1075ABP100G | onsemi | - Rail/Tube (Alt: NCP1075ABP100G) RoHS : Compliant |
| 100 | ||
| ST110-75T2MI | Vishay Intertechnologies | - Bulk (Alt: ST110-75T2MI) RoHS : Not Compliant |
| 65 | ||
| 801-075-07M9-19SB | Glenair Inc | - Bulk (Alt: 801-075-07M9-19SB) RoHS : Not Compliant |
| 1 | ||
| MTMS-107-51-S-S-185 | Samtec Inc | Pin Header, Board-to-Board, 1 Rows, 7 Contacts, Through Hole, MTMS Series, Unshrouded, Straight - Bulk (Alt: MTMS-107-51-S-S-185) RoHS : Compliant |
| 0 | ||
| 11107544-00 | TE Connectivity | AST4400P00150P4I1000:CTO-13000000-03 - Bag (Alt: 11107544-00) RoHS : Not Compliant |
| 0 | ||
| RCMM1075R0JKS09 | Vishay Intertechnologies | - Bag (Alt: RCMM1075R0JKS09) RoHS : Not Compliant |
| 0 | ||
| R141075000W | Radiall | - Bulk (Alt: R141075000W) RoHS : Compliant |
| 0 | ||
| RS01075K00FE12 | Vishay Intertechnologies | - Bulk (Alt: RS01075K00FE12) RoHS : Compliant |
| 0 | ||
| RS01075K00FS7338 | Vishay Intertechnologies | RS-10-38 75K 1% S73 - Tape and Reel (Alt: RS01075K00FS7338) RoHS : Not Compliant |
| 0 | ||
| PR01000107503JA500 | Vishay Intertechnologies | - Ammo Pack (Alt: PR01000107503JA500) RoHS : Compliant |
| 0 | ||
| HTMS-107-51-G-D | Samtec Inc | - Bulk (Alt: HTMS-107-51-G-D) RoHS : Compliant |
| 0 | ||
![]() Newark | MP001075 | SPC Multicomp | Chip Resistor, 3W, 1Percent, 300R; |Multicomp Pro MP001075 RoHS : Compliant |
| 2,000 | |
| CRCW201075R0FKEF | Vishay Intertechnologies | Res, 75R, 1%, 0.75W, 2010, Thick Film; |Vishay CRCW201075R0FKEF RoHS : Compliant |
| 1,630 | ||
| CRCW201075R0FKEF | Vishay Intertechnologies | Res, 75R, 1%, 0.75W, 2010, Thick Film; |Vishay CRCW201075R0FKEF RoHS : Compliant |
| 1,630 | ||
| JWD-107-5 | TE Connectivity | Relay, Reed, Spst-No, 100V, 0.5A, Tht; Contact Configuration:Spst-No; Coil Voltage:5Vdc; Product Range:Jwd Series; Relay Mounting:Through Hole; Coil Resistance:500Ohm; Switching Current Max:500Ma; Switching Voltage Max:100V Rohs Compliant: Yes RoHS : Compliant |
| 360 | ||
| MTMS-107-51-S-S-185 | Samtec Inc | Hdr, Brd-To-Brd, 1.27Mm, 7Pos; |Samtec, Inc. MTMS-107-51-S-S-185 RoHS : Compliant |
| 267 | ||
| HTMS-107-51-G-S | Samtec Inc | Pin Header, Htms-107-51-G-S; |Samtec, Inc. HTMS-107-51-G-S RoHS : Compliant |
| 260 | ||
| HTMS-107-51-G-D | Samtec Inc | Pin Header, Htms-107-51-G-D; |Samtec, Inc. HTMS-107-51-G-D RoHS : Compliant |
| 236 | ||
| HTMS-107-51-S-D-SM | Samtec Inc | Pin Header, Htms-107-51-S-D-Sm; |Samtec, Inc. HTMS-107-51-S-D-SM RoHS : Compliant |
| 155 | ||
| THS1075RJ | TE Connectivity | Through Hole Wirewound Resistor, Ths Ser; |Te Connectivity Cgs THS1075RJ RoHS : Compliant |
| 134 | ||
| ESW-107-59-S-D | Samtec Inc | Connector, Rcpt, 14Pos, 2Row, 2.54Mm; |Samtec, Inc. ESW-107-59-S-D RoHS : Compliant |
| 100 | ||
| ESW-107-59-S-S | Samtec Inc | Connector, Rcpt, 7Pos, 1Row, 2.54Mm; |Samtec, Inc. ESW-107-59-S-S RoHS : Compliant |
| 53 | ||
| MP010758 | SPC Multicomp | Flat Ribbon Cable, 16Core, 26Awg, 30.5M; |Multicomp Pro MP010758 RoHS : Compliant |
| 31 | ||
| 1075 | Adafruit Industries | Square Force-Sensitive Resistor (Fsr) - Alpha Mf02A-N-221-A01 |Adafruit 1075 RoHS : Not Compliant |
| 0 | ||
| 1075 | Pelican Products Inc | 1075 Hardback Case; |Pelican Products 1075 RoHS : Not Compliant |
| 0 | ||
| 1075 | Keystone Electronics Corp | Thm Battery Holder; |Keystone 1075 RoHS : Not Compliant |
| 0 | ||
![]() RS | 1075 | Heyco | STRAIN RELIEF BUSHING, WHITE, NYLON 6/6, CORD DIAMETER 18 AWG, SR SERIES |
| 10,000 | |
| 64721075 (647.210.75) | WERMA SIGNALTECHNIK GMBH + CO KG | LIGHT TOWER, KOMBISIGN 72,LEDSTEADY, LED BLINK, TWINLIGHT,24V AC/DC, GREEN |
| 29 | ||
| 64711075 (647.110.75) | WERMA SIGNALTECHNIK GMBH + CO KG | LIGHT TOWER, KOMBISIGN 72,LEDSTEADY, LED BLINK, TWINLIGHT,24V AC/DC, RED |
| 29 | ||
| 64751075 (647.510.75) | WERMA SIGNALTECHNIK GMBH + CO KG | LIGHT TOWER, KOMBISIGN 72,LEDSTEADY, LED BLINK, TWINLIGHT,24V AC/DC, BLUE |
| 21 | ||
| 64731075 (647.310.75) | WERMA SIGNALTECHNIK GMBH + CO KG | LIGHT TOWER, KOMBISIGN 72,LEDSTEADY, LED BLINK, TWINLIGHT,24V AC/DC, YELLOW |
| 21 | ||
| VR107516BM1114 | Norgren | SUB BASE, 4MM PIF INT BASE, VR10 SERIES |
| 6 | ||
| 64431075 (644.310.75) | WERMA SIGNALTECHNIK GMBH + CO KG | LIGHT TOWER, KOMBISIGN 71,LED LIGHT, BLINKING ELEMENT,24VAC/DC, YELLOW |
| 5 | ||
| 10901075 (109.010.75 OR 109-010-75) | WERMA SIGNALTECHNIK GMBH + CO KG | AUDIBLE ALARM, ELECTRONIC BUZZER, PULSE TONE, 24VAC/DC, BLACK, PANEL MOUNT, M22 |
| 5 | ||
| 2451075 (25531532) (MPOI0-801000-100RS) | RS Pro | SCREW, #8-32 X 1 PHILLIPS OVAL MACHINE, ZINC PLATED |
| 5 | ||
| 64411075 (644.110.75) | WERMA SIGNALTECHNIK GMBH + CO KG | LIGHT TOWER, KOMBISIGN 71,LED LIGHT, BLINKING ELEMENT,24VAC/DC, RED |
| 4 | ||
| 69821075 (698.210.75 OR 698-210-75) | WERMA SIGNALTECHNIK GMBH + CO KG | LIGHT TOWER, LED, KOMPAKT 37,PRE-ASSEMBLED, M12 PLUG,24VAC/DC, GREEN/YELLOW/RED |
| 4 | ||
| 69811075 (698.110.75 OR 698-110-75) | WERMA SIGNALTECHNIK GMBH + CO KG | LIGHT TOWER, LED, KOMPAKT 37,PRE-ASSEMBLED, CABLE,24VAC/DC, GREEN/YELLOW/RED |
| 2 | ||
| 1075 | Adafruit Industries | SQUARE FORCE-SENSITIVE RESISTOR (FSR) - INTERLINK 406 |
| 0 | ||
| 1075 | Keystone Electronics Corp | POLARIZED THM BATTERY HOLDER FOR AAA BATTERY W/COIL SPRING |
| 0 | ||
| 1075 | HH Smith | CONN; TERM STRIP; LUG TYPE; MINI; 6 TERM; 2 GND; 1/4 IN PITCH; .096 IN MNT HOLE |
| 0 | ||
![]() STMicroelectronics | ADP61075W3-L | STMicroelectronics | Automotive-grade ACEPACK DRIVE power module, sixpack topology 750 V, 1.2 mOhm typ. SiC MOSFET gen.3 based RoHS : Compliant |
| 0 | |
| ADP61075W3 | STMicroelectronics | Automotive-grade ACEPACK DRIVE power module, sixpack topology 750 V, 1.2 mOhm typ, SiC MOSFET gen.3 based RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | DCS-1075 | NUTS | 2,650 | |||
| 91075A102 | MISC. SPACERS/STANDOFFS/HANDLES | 560 | ||||
| 5622-107-5 | Seastrom Mfg | 266 | ||||
| MS21075L06 | MS Nuts | 218 | ||||
| 67-52-1075 | MISC. INDUSTRIAL HRD | 147 | ||||
| MS21075-5 | MS Nuts | 37 | ||||
| MS21075-5 | SIMMONDS (HOWMET/ARCONIC/ALCOA) | 35 | ||||
| 10757690-L | MISC. TERMINALS | 25 | ||||
| E5-T1-075 | Southco | 18 | ||||
| MS21075L3E | MS Nuts | 7 | ||||
| 10-754-4-08 | Staffall | 7 | ||||
| E3-1251-075 | Southco | 6 | ||||
| 107517 | Unbrako Group | 5 | ||||
| ELM 1-075 | Bivar Inc | 4 | ||||
| 31-10-75 | Amphenol RF | 1 | ||||
![]() Rochester Electronics | BUK6610-75C,118![]() | NXP Semiconductors | MOSFET N-Channel 75V 78A (Ta) TO-263-3 T/R RoHS : Compliant |
| 7,200 | |
BUK7C10-75AITE,118![]() | NXP Semiconductors | MOSFET N-Channel 75V 75A (Ta) TO-263-7 T/R RoHS : Compliant |
| 1,778 | ||
BUK6610-75C,118![]() | Nexperia | MOSFET N-Channel 75V 78A (Ta) TO-263-3 T/R RoHS : Compliant |
| 7,474 | ||
| NCP1075BBP065G | onsemi | Off-Line Converter and Switch Flyback 7-DIP Tube RoHS : Compliant |
| 1,500 | ||
| NCP1075BAP130G | onsemi | Off-Line Converter and Switch Flyback 7-DIP Tube RoHS : Compliant |
| 4,781 | ||
| NCP1075P065G | onsemi | Off-Line Converter and Switch Flyback 7-DIP Tube RoHS : Compliant |
| 99 | ||
| NCP1075BBP130G | onsemi | Off-Line Converter and Switch Flyback 7-DIP Tube RoHS : Compliant |
| 12,644 | ||
ADM1075-2ARUZ![]() | Analog Devices Inc | Hot Swap 1 Ch -80V 28-SOP Tube RoHS : Compliant |
| 1,107 | ||
DS1075M-60![]() | Maxim Integrated Products | Clock Generator, 60MHz, CMOS, PDIP8 RoHS : Not Compliant |
| 3,133 | ||
| DS1075Z-166 | Maxim Integrated Products | Timer Oscillator, Fixed Frequency (Dual) 8-SOIC Tube RoHS : Not Compliant |
| 2,262 | ||
| DS1075Z-60N | Maxim Integrated Products | Clock Generator RoHS : Not Compliant |
| 420 | ||
| DS1075Z-66N | Maxim Integrated Products | Clock Generator RoHS : Not Compliant |
| 3,197 | ||
| DS1075Z-701N | Maxim Integrated Products | DS1075 Econoscillator/Divider RoHS : Not Compliant |
| 1,395 | ||
DS1075Z-80![]() | Maxim Integrated Products | Clock Generator, 80MHz, CMOS, PDSO8 RoHS : Not Compliant |
| 18 | ||
| MAX1075ETC | Maxim Integrated Products | IC ADC 1 CONV 10Bits SAR 3-Wire Serial, MICROWIRE, QSPI, SPI 12-QFN Tube RoHS : Not Compliant |
| 2,996 | ||
![]() Sager | 1075 | Keystone Electronics Corp | Cylindrical Battery Contacts, Clips, Holders & Springs AAA holder w/ coil spring THM |
| 0 | |
| 2-2151075-1 | TE Connectivity | Crimpers / Crimping Tools OC-PA-S-FM-055F 070O-001-0306 | 0 | |||
| 11107544-00 | TE Connectivity | AST4400P00150P4I1000:CTO-13000000-03 |
| 0 | ||
| 089107.5H | Littelfuse Inc | FUSE - LP MINI 58VDC AG 7.5A 100-PC RoHS : Compliant |
| 0 | ||
| 5.21.733.010/7525 | RAFI USA Inc | RAFI KUNSTSTSCHRB KB30X12 ST VERZINKT blau | 0 | |||
| 44501-0755 | OMRON Electronic Components | Switch Actuators SA01-STD | 0 | |||
| 0638191075 | Molex | Crimpers / Crimping Tools LOCATOR ASSEMBLY |
| 0 | ||
| 0732510750 | Molex | RF Connectors / Coaxial Connectors |
| 0 | ||
| ZLTMM-110-75-L-D-260 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| 0387107523 | Molex | Molex SR BTS PC 23 ASY C | 0 | |||
| RF179-74BJ3-72SP1-0750 | Samtec Inc | RF Cable Assemblies RoHS : Compliant | 0 | |||
| HMTMS-107-54-G-D-335 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| HMTMS-107-55-S-D-390 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| FW-13-05-F-D-411-075-ES-A | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FW-25-05-L-D-501-075-EP-P-TR | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
![]() Ameya Holding Limited | TMP1075DGKR![]() | Texas Instruments | RoHS : Compliant | 3,786 | ||
| TMP1075NDRLR | Texas Instruments | RoHS : Compliant | 174 | |||
![]() ComSIT USA | 91075A372 | MCMASTER CARR | AVAILABLE EU | 18 | ||
![]() ComSIT USA | TCP21075+ | Mini-Circuits | RF Power Combiner and Divider 1GHz 6-SMD T/R RoHS : Compliant | 6,000 | ||
| TC110750VOA | mct | Electronic Component RoHS : Not Compliant | 100 | |||
| SC510759MFU | Motorola Semiconductor Products | Electronic Component RoHS : Not Compliant | 39 | |||
| DS1075M100 | Vishay Dale | ECON OSCILLATOR/DIVIDER Clock Generator, 100MHz, CMOS, PDIP8 RoHS : Not Compliant | 11 | |||
![]() Interstate Connecting Components | 11107544-00 | TE Connectivity | AST4400P00150P4I1000:CTO-13000 | 0 | ||
| 10-341075-56P | Amphenol Aerospace | RECEPT 10-341075-56P | 0 | |||
| 10-752157-000 | Amphenol Industrial Operations | PLUG CONNECTOR 2 POS 8AWG | 0 | |||
| 11107529-00 | TE Connectivity | AST4400P00050P4Y1000-SS:CTO-13 | 0 | |||
| 10-410751-13P | Amphenol Aerospace | RECEPT 10-410751-13P | 0 | |||
| 021000-1075 | ITT Interconnect Solutions | DPXA-40-34S | 0 | |||
| 04-0981-0757 | TE Connectivity | PT8420-0015-111-1120 | 0 | |||
| 100G0111-0.75-4 | TE Connectivity | 100G0111-0.75-4 RoHS : Compliant | 0 | |||
| C10-754563-Z2P | Amphenol Industrial Operations | AMPHE-BTS 55A 4 KEYWAY RECEPTA | 0 | |||
| 801-075-07M10-201SA | Glenair Inc | RoHS : Compliant | 0 | |||
| 801-075-07M21-12SA | Glenair Inc | RoHS : Compliant | 0 | |||
| 801-075-07ZANU16-235SC | Glenair Inc | 0 | ||||
| 801-075-17NF16-2PA | Glenair Inc | 0 | ||||
| OQ1075800000G | Amphenol Anytek | OQ-5.0- 10P GREY CONTACT WITH | 0 | |||
| BISS-NO.1-0-75MM | TE Connectivity | BISS-NO.1-0-75MM RoHS : Compliant | 0 | |||
![]() PEI Genesis | 10-597981-075 | Amphenol Corporation |
| 0 | ||
| M85049/10-75B | SOURIAU-SUNBANK |
| 0 | |||
| C10-752854-001 | Amphenol Corporation |
| 0 | |||
| M85049/10-75S | SOURIAU-SUNBANK |
| 0 | |||
| 51-075-6801-220 | ITT Interconnect Solutions |
| 0 | |||
| 521-0757 | Dialight |
| 0 | |||
| 10-759137-045 | Amphenol Corporation |
| 0 | |||
| 10-752070-18FL | Amphenol Corporation |
| 0 | |||
| 10-755621-055 | Amphenol Corporation |
| 0 | |||
| S694-210-75R | SOURIAU-SUNBANK |
| 0 | |||
| 51-075-0000-220 | ITT Interconnect Solutions |
| 0 | |||
| M85049/10-75W | Amphenol PCD |
| 0 | |||
| M85049/10-75W | Amphenol Corporation | RoHS : Not Compliant |
| 0 | ||
| M85049/10-75W | SOURIAU-SUNBANK |
| 0 | |||
| 10-752155-000 | Amphenol Corporation |
| 0 | |||
![]() Rutronik | CR10-7502-FN | ASJ Holdings Limited | RC0402 75K 1% 0,063W TK100 RoHS : Compliant |
| 2,050,000 | |
| CR10-7500-FK | ASJ Holdings Limited | RC0402 750R 1% 0,063W TK100 RoHS : Compliant |
| 1,000,000 | ||
| CR10-7502-FK | ASJ Holdings Limited | RC0402 75K 1% 0,063W TK100 RoHS : Compliant |
| 390,000 | ||
| CR10-752-JK | ASJ Holdings Limited | RC0402 7,5K 5% 0,063W TK100 RoHS : Compliant |
| 110,000 | ||
| CR10-750-JK | ASJ Holdings Limited | RC0402 75R 5% 0,63W TK100 RoHS : Compliant |
| 50,000 | ||
| CR10-7501-FK | ASJ Holdings Limited | RC0402 7,5K 1% 0,063W TK100 RoHS : Compliant |
| 40,000 | ||
| 089107.5NXS | Littelfuse Inc | Low Profile MINI 58V 7,5A silver RoHS : Compliant |
| 5,000 | ||
![]() Chip 1 Exchange | NCP1075P065G | onsemi | INSTOCK RoHS : Compliant | 36,400 | ||
| 100G0111-0.75-0CK0226/6 | TE Connectivity | INSTOCK RoHS : Compliant | 11,830 | |||
| CR10-7501-F# | ASJ Holdings Limited | INSTOCK | 8,448 | |||
| 2110759-1 | TE Connectivity | INSTOCK RoHS : Compliant | 7,055 | |||
| NCP1075STAT3G | onsemi | INSTOCK RoHS : Compliant | 4,764 | |||
| RMC-10-7501FR | Cinetech Industrial Co Ltd | INSTOCK | 3,589 | |||
| 111075-9002 | Molex | INSTOCK | 2,912 | |||
DS1075Z-100+![]() | Maxim Integrated Products | INSTOCK RoHS : Compliant | 2,589 | |||
UJA1075ATW/5V0/WD![]() | NXP Semiconductors | INSTOCK RoHS : Compliant | 2,000 | |||
| DS1075Z-644 | Maxim Integrated Products | INSTOCK | 1,598 | |||
| 9410758021- | INSTOCK | 473 | ||||
| C04610-75.000-TR | Raltron Electronics Corporation | INSTOCK | 355 | |||
| DS1075Z-100+ | INSTOCK | 89 | ||||
| DS1075Z-A60N | Maxim Integrated Products | INSTOCK | 47 | |||
| 5961-01-075-6271 | INSTOCK | 7 | ||||
![]() Avnet Abacus | PR01000107502JA100 | Vishay Intertechnologies | - Tape and Reel (Alt: PR01000107502JA100) RoHS : Compliant | 14,000 | ||
| VM1075500000G | Amphenol Corporation | Conn Pluggable Terminal Block Plug 10 POS 5mm Screw 20A (Alt: VM1075500000G) RoHS : Compliant | 3,330 | |||
| 801-075-07NF8-13SB | Glenair Inc | CIRC MGHTY MSE 8060 CIRCULAR MIGHTY MOUSE (Alt: 801-075-07NF8-13SB) RoHS : Not Compliant | 55 | |||
| 801-075-07NF10-26PA | Glenair Inc | CIRC MGHTY MSE 8060 CIRCULAR MIGHTY MOUSE (Alt: 801-075-07NF10-26PA) RoHS : Not Compliant | 47 | |||
| 801-075-07NF10-26SA | Glenair Inc | (Alt: 801-075-07NF10-26SA) RoHS : Not Compliant | 5 | |||
| 1075924 | Phoenix Contact | SMKDS 310 GY SMKDS310GY (Alt: 1075924) RoHS : Compliant | 0 | |||
| 1710758 | Phoenix Contact | FFKDSALV1508 2 RDWH FFKDSALV15082RDWH (Alt: 1710758) RoHS : Compliant | 0 | |||
| 1075925 | Phoenix Contact | SMKDS 315 GY SMKDS315GY (Alt: 1075925) RoHS : Compliant | 0 | |||
| 10756743 | Aptiv PLC | Automotive Connector Contact Sicma3 280 Pin Crimp (Alt: 211CL3S2160) RoHS : Compliant | 0 | |||
| 26481075 | Molex | (Alt: 26481075) RoHS : Compliant | 0 | |||
| 26481075 | Molex | (Alt: 26481075) RoHS : Compliant | 0 | |||
| THS1075RJ | TE Connectivity | Resistor 75 Ohm 5 10 W Wirewound Power Solder Lug (Alt: 3-1879073-1) RoHS : Compliant | 0 | |||
| 417911075 | Molex | KK 156 Header Assembly with Friction Lock Straight 5 Circuits Gold Plating (Alt: 417911075) RoHS : Compliant | 0 | |||
| RC0805JR-10750RL | YAGEO Corporation | SMD Chip Resistor 750 Ohm 5 125 mW 0805 2012 Metric Thick Film General Purpose RC Series - Tape and Reel (Alt: RC0805JR-10750RL) RoHS : Compliant | 0 | |||
| RWM04107500JR15E1 | Vishay Intertechnologies | Resistor 750 Ohm 5 3 W Axial Leaded Wirewound Power (Alt: RWM04107500JR15E1) RoHS : Compliant | 0 | |||
![]() Avnet Asia | UE36-A1075-3100T | Amphenol Corporation | AHLUE36-A1075-3100T 56G QSFP-DD SMT CONN (Alt: UE36-A1075-3100T) RoHS : Compliant |
| 1,200 | |
| 10147126-107500ULF | Amphenol Corporation | FCI10147126-107500ULF EXAMEZZ 4X25 7.5MM (Alt: 10147126-107500ULF) RoHS : Compliant |
| 200 | ||
| FTR-107-51-S-D-06 | Samtec Inc | (Alt: FTR-107-51-S-D-06) RoHS : Compliant |
| 5 | ||
| 10-754822-103 | Amphenol Corporation | UNIT, DUST CAP + CHAIN (Alt: 10-754822-103) RoHS : Compliant |
| 2 | ||
| CPZ1075M-TL | Power Integrations | 145 W (WITH INNO4) (Alt: CPZ1075M-TL) RoHS : Compliant | 0 | |||
| C10-752785-030 | Amphenol Corporation | SLPIPA16BSO (Alt: C10-752785-030) RoHS : Compliant | 0 | |||
| T1075-0009 | Amphenol Corporation | CONN SFP/SFP+ 2XN COMBO SEATING TOOL STA (Alt: T1075-0009) RoHS : Compliant | 0 | |||
| C10-752509-360 | Amphenol Corporation | PCB BOARD CONNCTOR (Alt: C10-752509-360) RoHS : Compliant | 0 | |||
| 10-754825-103 | Amphenol Corporation | CABLE, DUST CAP + CHAIN (Alt: 10-754825-103) RoHS : Compliant | 0 | |||
| NCP1075STAT3G | onsemi | (Alt: NCP1075STAT3G) RoHS : Compliant | 0 | |||
| T1075-UE36-EA01 | Amphenol Corporation | (Alt: T1075-UE36-EA01) RoHS : Compliant | 0 | |||
| C10-752785-130 | Amphenol Corporation | SLPIPA16BSB (Alt: C10-752785-130) RoHS : Compliant | 0 | |||
| PR01000107501JA100 | Vishay Intertechnologies | (Alt: PR01000107501JA100) RoHS : Compliant | 0 | |||
| CRCW121075K0JNEA | Vishay Intertechnologies | (Alt: CRCW121075K0JNEA) RoHS : Compliant |
| 0 | ||
| 10128494-107500ULF | Amphenol Corporation | Conn Stacking High Speed Mezzanine Hermaphroditic PL/RCP 350 POS 15mm/19mm/20mm/27mm/30mm/35mm Stac (Alt: 10128494-107500ULF) RoHS : Compliant | 0 | |||
![]() Avnet Silica | NCP1075P065G | onsemi | (Alt: NCP1075P065G) RoHS : Compliant | 0 | ||
| NCP81075DR2G | onsemi | High Side and Low Side Gate Driver HighFrequency 180 V 4A capability (Alt: NCP81075DR2G) RoHS : Compliant | 0 | |||
TC1107-5.0VOA![]() | Microchip Technology Inc | LDO Regulator Pos 5V 03A 8Pin SOIC N Tube (Alt: TC1107-5.0VOA) RoHS : Compliant | 0 | |||
| HFJ11-1075ERL | Halo Electronics Inc | (Alt: HFJ11-1075ERL) RoHS : Compliant | 0 | |||
| NCP1075STAT3G | onsemi | (Alt: NCP1075STAT3G) RoHS : Compliant | 0 | |||
| NCP1075STCT3G | onsemi | (Alt: NCP1075STCT3G) RoHS : Compliant | 0 | |||
TC1107-5.0VUATR![]() | Microchip Technology Inc | LDO Regulator Pos 5V 03A 8Pin MSOP TR (Alt: TC1107-5.0VUATR) RoHS : Compliant | 0 | |||
| C10756_CUTE-3-W | LEDIL | Cute LensDiameter 35mmHeight 15mmEfficiency 90 Percentage (Alt: C10756_CUTE-3-W) RoHS : Compliant | 0 | |||
| C10755_CUTE-3-M | LEDIL | Cute LensDiameter 35mmHeight 15mmEfficiency 90 Percentage (Alt: C10755_CUTE-3-M) RoHS : Compliant | 0 | |||
BUK7107-55AIE,118![]() | Nexperia | Trans MOSFET NCH 55V 140A 5Pin4Tab D2PAK TR (Alt: BUK7107-55AIE,118) RoHS : Compliant | 0 | |||
DSC1123AI1-075.0000![]() | Microchip Technology Inc | MEMS Oscillator 75 MHz SMD 7mm x 5mm 50 ppm 33 V DSC1123 (Alt: DSC1123AI1-075.0000) RoHS : Compliant | 0 | |||
DSC1103CI1-075.0000![]() | Microchip Technology Inc | MEMS Oscillator 75 MHz SMD 32mm x 25mm 50 ppm 33 V DSC1103 (Alt: DSC1103CI1-075.0000) RoHS : Compliant | 0 | |||
DSC1001DE1-075.0000![]() | Microchip Technology Inc | (Alt: DSC1001DE1-075.0000) RoHS : Compliant | 0 | |||
| FP11075_LISA2-M-CLIP | LEDIL | LENS ROUND 1 POS 99MM OD 68MM H (Alt: FP11075_LISA2-M-CLIP) RoHS : Compliant | 0 | |||
| OX-2050-BEJ-1075-100M000000 | Microchip Technology Inc | (Alt: OX-2050-BEJ-1075-100M000000) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | CAB.01075 | Taoglas Antenna Solutions | IPEX MHF4L(HSC comp) to 100mm 1.13mm Black SMA(F)BKST |
| 0 | |
![]() Component Electronics, Inc | RMC10-753JT13 | Megastar Electroniques | IN STOCK SHIP TODAY |
| 17,000 | |
| CRCW121075R0FKEA | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,500 | ||
| RMC1/10-75R-1% | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 1,823 | ||
| CRCW12107502FRT1 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 645 | ||
| 1075075 | IMS CONNECTI | IN STOCK SHIP TODAY |
| 500 | ||
| 1076A-010-7500 | Belden Inc | IN STOCK SHIP TODAY |
| 500 | ||
| RS01075K00FE12 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 400 | ||
| SC11075CV/AKE | Sierra Semiconductor | IN STOCK SHIP TODAY | 152 | |||
| 301-1010-75 | DIGI INTERNA | IN STOCK SHIP TODAY |
| 71 | ||
| 31-10-75 | Amphenol Corporation | IN STOCK SHIP TODAY RoHS : Unknown |
| 59 | ||
| ESW-107-59-S-D | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 50 | ||
DS1075Z-100![]() | Maxim Integrated Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 24 | ||
| JWD-107-5 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 13 | ||
| 1075 | 3M | IN STOCK SHIP TODAY |
| 10 | ||
| 46M1075 | IBM | IN STOCK SHIP TODAY |
| 10 | ||
![]() DB Roberts | 1075 | Heyco | SR 3A-4 WHITE | 0 | ||
| 47-10-107-54 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 0362511075 | Essentra Components | UNSLOTTED HEX BOLT, 58-11 THRE | 0 | |||
| 3262511075B | Essentra Components | SLOTTED HEX SCREW, 58-11 THREA | 0 | |||
| 10757 | Heyco | HSCBS7-10 NATURAL | 0 | |||
| 167107500002 | Essentra Components | FINNED RIVET A7.0 B21.2 | 0 | |||
| 10758 | Heyco | HSCBS7-12 NATURAL | 0 | |||
| 0BN01-07516 | Avdel | AVIBULB RIV 532 DM ST SCREEN | 0 | |||
| KD11-0750 | Shercon Inc | MSKNG TAPE 3/4 X 60 YDS (300 DEG) 48/CASE | 0 | |||
| LP1-121-0750-F | Essentra Components | PC LIGHT PIPE 0.121 DIA X 075 | 0 | |||
| E5-1-075-051 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E5-1-075-031 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| PC11-0750 | Shercon Inc | RED TAPE 3/4 X 72 YDS 48/CASE | 0 | |||
| RS-1811-0750 | Heyco | RS 0187 OD X115 ID X750 LG NAT | 0 | |||
| 11075 | Essentra Components | 0 | ||||
![]() EBV Elektronik | FP11075_LISA2-M-CLIP | LEDIL | LENS ROUND 1 POS 99MM OD 68MM H (Alt: FP11075_LISA2-M-CLIP) RoHS : Compliant | 800 | ||
| CPZ1075M-TL | Power Integrations | (Alt: CPZ1075M-TL) RoHS : Compliant | 0 | |||
| NCP1075P065G | onsemi | (Alt: NCP1075P065G) RoHS : Compliant | 0 | |||
| NCP81075DR2G | onsemi | High Side and Low Side Gate Driver HighFrequency 180 V 4A capability (Alt: NCP81075DR2G) RoHS : Compliant | 0 | |||
TC1107-5.0VOA![]() | Microchip Technology Inc | LDO Regulator Pos 5V 03A 8Pin SOIC N Tube (Alt: TC1107-5.0VOA) RoHS : Compliant | 0 | |||
| NCP1075STAT3G | onsemi | (Alt: NCP1075STAT3G) RoHS : Compliant | 0 | |||
| NCP1075STCT3G | onsemi | (Alt: NCP1075STCT3G) RoHS : Compliant | 0 | |||
| NCP1075BAP100G | onsemi | Enhanced Off line Switcher for Robust and Highly Efficient Power Supplies B Package 100 kHz version (Alt: NCP1075BAP100G) RoHS : Compliant | 0 | |||
| C10756_CUTE-3-W | LEDIL | Cute LensDiameter 35mmHeight 15mmEfficiency 90 Percentage (Alt: C10756_CUTE-3-W) RoHS : Compliant | 0 | |||
| C10758_STRADA-A | LEDIL | LENS RECTANGULAR 1 POS 196 154MM OD 114MM H (Alt: C10758_STRADA-A) RoHS : Compliant | 0 | |||
| C10755_CUTE-3-M | LEDIL | Cute LensDiameter 35mmHeight 15mmEfficiency 90 Percentage (Alt: C10755_CUTE-3-M) RoHS : Compliant | 0 | |||
| UJA1075ATW/5W/2Z | NXP Semiconductors | (Alt: UJA1075ATW/5W/2Z) RoHS : Compliant | 0 | |||
| SIM7500SA S2-10753-Z1W0Q | SIMCom | Cellular Module LTEFDD WCDMA 34V to 42V 24mm x 27mm x 275mm (Alt: SIM7500SA S2-10753-Z1W0Q) RoHS : Compliant | 0 | |||
| SIM7500SA S2-10753-Z1WA1 | SIMCom | Cellular Module LTEFDD WCDMA 34V to 42V 24mm x 27mm x 275mm (Alt: SIM7500SA S2-10753-Z1WA1) RoHS : Compliant | 0 | |||
| EX-4002-EEE-1075-10M0000000 | Microchip Technology Inc | (Alt: EX-4002-EEE-1075-10M0000000) RoHS : Compliant | 0 | |||
![]() ECCO | C10-752804-000 | Amphenol Industrial Operations |
| 90 | ||
![]() Flip Electronics | NCP1075P100G | onsemi | Stock, Ship Today RoHS : Compliant |
| 195,500 | |
| NCP81075MTTXG | onsemi | Stock, Ship Today RoHS : Compliant |
| 40,000 | ||
| NCP1075BAP065G | onsemi | Stock, Ship Today RoHS : Compliant |
| 11,450 | ||
| NCP1075P130G | onsemi | Stock, Ship Today RoHS : Compliant |
| 4,750 | ||
UJA1075ATW/5V0,118![]() | NXP Semiconductors | Stock RoHS : Compliant | 2,000 | |||
| NCP1075BAP100G | onsemi | Stock, Ship Today RoHS : Compliant |
| 100 | ||
![]() Master Electronics | 10-754726-1102 | Amphenol Commercial | SurLok Plus® 8.0mm RADSOK power connector receptacle with screw and busbar termination options for high-voltage industrial applications. RoHS : Compliant |
| 80 | |
| 1075 | Amphenol RF | Coax Cable Termination - Single Hole - Mounting for RG-8 RG-213 RG-225. RoHS : Compliant |
| 18 | ||
| 155851-0750 | ITT Interconnect Solutions | Connector Miniature Circular Socket 10 Position Solder Cup Straight Cable Mount 10 Terminal 1 Port RoHS : Not Compliant |
| 0 | ||
| 111075-0044 | ITT Interconnect Solutions | KJL6T9B98SA; 38999 Series I II and III; Circular RoHS : Compliant |
| 0 | ||
| 11107544-00 | TE Connectivity | SENSOR SOLUTIONS MOQ Reduction RoHS : Compliant |
| 0 | ||
| 113017-1075C | ITT Interconnect Solutions | CIRCULAR RoHS : Not Compliant |
| 0 | ||
| ZLTMM-110-75-L-D-260 | Samtec Inc | Conn Board Stacker HDR 20 POS 6.6mm Stack Height 2mm Solder ST Through Hole Bulk RoHS : Compliant |
| 0 | ||
| HMTMS-107-54-G-D-335 | Samtec Inc | Conn Unshrouded Header HDR 14 POS 1.27mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| HMTMS-107-55-S-D-390 | Samtec Inc | Conn Unshrouded Header HDR 14 POS 1.27mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| FW-32-02-F-D-371-075-EP | Samtec Inc | Conn Board Stacker HDR 64 POS 1.27mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| FW1903SD321075EPAFR | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW4505LD411075EPAFR | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTMS-107-51-G-D | Samtec Inc | .050 X .100 High-Temp Through-hole Micro Terminal Strip RoHS : Compliant |
| 0 | ||
| HTMS-107-59-S-D | Samtec Inc | .050 X .100 High-Temp Through-hole Micro Terminal Strip RoHS : Compliant |
| 0 | ||
| MTMS-107-51-G-D-100 | Samtec Inc | .050 x .100 Variable Post Height Micro Terminal Strip RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PEANOM1075 | Pasternack Enterprises | Key Specifications, Polarization: Vertical, Minimum Frequency: 698 MHz, Maximum Frequency: 2.7 GHz, Connector Series: SMA, Connector Gender: Male, Impedance: 50 Ohm, Maximum Input VSWR: 1.5:1. 698 to 2700 MHz Omni Antenna 6.5 dBi Gain, 5.5 mm Spring SMA Male Connector, Black Fiberglass Radome. Pasternack’s PEANOM1075 is a vertical polarized antenna that ships same day from our ISO 9001:2015 certified facility. The antenna with 698 to 2700 MHz frequency range has a maximum input VSWR of 1.5. This omni directional antenna has SMA male connectors. This antenna has a black radome made of fiberglass, an overall length of 29.53 in, width of 2 in, and weighs 2.42 lbs. Pasternack’s PEANOM1075 is a single band antenna operating from 698 to 2700 MHz with 6.5 dBi gain. Pasternack's experts are on hand to assist you with any inquiries. Order this PEANOM1075 antenna 7 days a week. 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping. |
| 20 | |
| PE3C10752-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 3.5mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. 1.85mm Male to 3.5mm Female Bulkhead Cable 9 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10752-9 1.85mm male to 3.5mm female bulkhead RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 3.5mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 3.5mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 3.5mm bulkhead cable connection on the other. Our 1.85mm to 3.5mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10752-9 can also be known as a 1.85mm plug to 3.5mm jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to bulkhead 3.5mm female cable has a maximum VSWR of 1.4:1. This PE3C10752-9 1.85mm plug to 3.5mm jack cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 3.5mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the clamp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications, and CAD drawings for this 9-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10752-9 can also be used in the other direction and will be a 3.5mm female bulkhead to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 3.5mm jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 3.5mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 3.5mm RF cable assembly as per your requirements. |
| 2 | ||
| PE3C10756-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 1.85mm Male to SMA Male Cable 12 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10756-12 1.85mm male to SMA male RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and an SMA cable connection on the other. Our 1.85mm to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C10756-12 can also be known as a 1.85mm plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to SMA male cable has a maximum VSWR of 1.4:1. This PE3C10756-12 1.85mm plug to SMA plug cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the solder/solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10756-12 can also be used in the other direction and will be an SMA male to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to SMA cable assembly for quick shipment worldwide. Variations of 1.85mm and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to SMA RF cable assembly as per your requirements. |
| 2 | ||
| PE3C10757-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 1.85mm Male to SSMC Plug Cable 6 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10757-6 1.85mm male to SSMC plug RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to SSMC plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and an SSMC cable connection on the other. Our 1.85mm to SSMC cable assembly has a male gender on end 1 and a plug on end 2. PE3C10757-6 can also be known as a 1.85mm plug to SSMC male cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to SSMC plug cable has a maximum VSWR of 1.4:1. This PE3C10757-6 1.85mm plug to SSMC male cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to SSMC cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the clamp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 6-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10757-6 can also be used in the other direction and will be an SSMC plug to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to SSMC male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to SSMC cable assembly for quick shipment worldwide. Variations of 1.85mm and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to SSMC RF cable assembly as per your requirements. |
| 2 | ||
| PE3C10750-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 1.85mm Male to 2.92mm Female 4 Hole Flange Cable 6 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10750-6 1.85mm male to 2.92mm female 4 hole flange mount RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 2.92mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 2.92mm 4 hole flange mount cable connection on the other. Our 1.85mm to 2.92mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10750-6 can also be known as a 1.85mm plug to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to 4 hole flange mount 2.92mm female cable has a maximum VSWR of 1.4:1. This PE3C10750-6 1.85mm plug to 2.92mm jack cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the solder/non-solder contact attachment method and a stainless steel body with gold plating. Additional dimensions, specifications, and CAD drawings for this 6-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10750-6 can also be used in the other direction and will be a 2.92mm female 4 hole flange mount to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 2.92mm jack 4 hole flange mount cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 2.92mm RF cable assembly as per your requirements. |
| 2 | ||
| PE3C10752-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 3.5mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 1.85mm Male to 3.5mm Female Bulkhead Cable 24 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10752-24 1.85mm male to 3.5mm female bulkhead RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 3.5mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 3.5mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 3.5mm bulkhead cable connection on the other. Our 1.85mm to 3.5mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10752-24 can also be known as a 1.85mm plug to 3.5mm jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to bulkhead 3.5mm female cable has a maximum VSWR of 1.4:1. This PE3C10752-24 1.85mm plug to 3.5mm jack cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 3.5mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the clamp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10752-24 can also be used in the other direction and will be a 3.5mm female bulkhead to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 3.5mm jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 3.5mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 3.5mm RF cable assembly as per your requirements. |
| 2 | ||
| PE3W10750 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Female Cable Using RG223 Coax. PE3W10750 is a SMA male right angle to SMA female cable using RG223 coax. This Pasternack SMA male right angle to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10750 SMA male right angle to SMA female cable assembly is constructed with RG223 coax. | 0 | |||
| PE3W10756 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: 2 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. Slide-On BMA Jack Right Angle 2 Hole Flange to SMA Male Cable Using RG142 Coax., Radio frequency assembly slide-on BMA jack right angle 2 hole flange to SMA male cable using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Slide-on BMA jack right angle 2 hole flange to SMA male cable using RG142 coax, BMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BMA 2 hole flange cable connection on one end and SMA cable connection on the other. Our right angle BMA to SMA cable assemblies have a jack gender on end 1 and male on end 2. PE3W10756 can also be known as a right angle BMA female to SMA plug cable assembly and will be shipped same-day as it is purchased. BMA female to SMA plug cable assembly PE3W10756 is built with RG142 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with right angle BMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency BMA right angle jack 2 hole flange to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10756 can also be used in the other direction and will be SMA male to right angle BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA right angle female 2 hole flange to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to SMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack right angle 2 hole flange to SMA male cable using RG142 coax. | 0 | |||
| PE3W10752 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Low Loss Cable Using PE-C195 Coax., Radio frequency assembly SMA male to SMA female low loss cable using PE-C195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female low loss cable using PE-C195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W10752 can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10752 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. SMA plug to SMA jack cable assembly PE3W10752 is built with PE-C195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W10752 can also be used in the other direction and will be a SMA female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. | 0 | |||
| PE3C10755-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 1.85mm Male to BMMA Male Bulkhead Cable 12 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10755-12 1.85mm male to BMMA male bulkhead RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to BMMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to BMMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a BMMA bulkhead cable connection on the other. Our 1.85mm to BMMA cable assembly has a male gender on end 1 and a male on end 2. PE3C10755-12 can also be known as a 1.85mm plug to BMMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to bulkhead BMMA male cable has a maximum VSWR of 1.4:1. This PE3C10755-12 1.85mm plug to BMMA plug cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to BMMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10755-12 can also be used in the other direction and will be a BMMA male bulkhead to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to BMMA plug bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to BMMA cable assembly for quick shipment worldwide. Variations of 1.85mm and BMMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to BMMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W10756-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: 2 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Slide-On BMA Jack Right Angle 2 Hole Flange to SMA Male Cable 60 Inch Length Using RG142 Coax., Radio frequency assembly slide-on BMA jack right angle 2 hole flange to SMA male cable 60 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Slide-on BMA jack right angle 2 hole flange to SMA male cable 60 inch length using RG142 coax, BMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BMA 2 hole flange cable connection on one end and SMA cable connection on the other. Our right angle BMA to SMA cable assemblies have a jack gender on end 1 and male on end 2. PE3W10756-60 can also be known as a right angle BMA female to SMA plug cable assembly and will be shipped same-day as it is purchased. BMA female to SMA plug cable assembly PE3W10756-60 is built with RG142 which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with right angle BMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency BMA right angle jack 2 hole flange to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10756-60 can also be used in the other direction and will be SMA male to right angle BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA right angle female 2 hole flange to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to SMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack right angle 2 hole flange to SMA male cable 60 inch length using RG142 coax. |
| 0 | ||
| PE3C10759-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. 1.85mm Male to SSMC Plug Right Angle Cable 9 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10759-9 1.85mm male to right angle SSMC plug RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to SSMC plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a right angle SSMC cable connection on the other. Our 1.85mm to SSMC cable assembly has a male gender on end 1 and a plug on end 2. PE3C10759-9 can also be known as a 1.85mm plug to right angle SSMC male cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to right angle SSMC plug cable has a maximum VSWR of 1.4:1. This PE3C10759-9 1.85mm plug to SSMC male cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to right angle SSMC cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the solder/solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this 9-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10759-9 can also be used in the other direction and will be a right angle SSMC plug to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to SSMC right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to SSMC cable assembly for quick shipment worldwide. Variations of 1.85mm and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to SSMC RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10751 | Pasternack Enterprises | 0 | ||||
| PE3W10752-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Female Low Loss Cable 24 Inch Length Using PE-C195 Coax., Radio frequency assembly SMA male to SMA female low loss cable 24 inch length using PE-C195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female low loss cable 24 inch length using PE-C195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W10752-24 can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10752-24 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. SMA plug to SMA jack cable assembly PE3W10752-24 is built with PE-C195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W10752-24 can also be used in the other direction and will be a SMA female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3W11075 | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. | 0 | |||
![]() Teledyne HiRel | M38510/75703BSA | Teledyne HiRel | BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | ||
M38510/75204B2A![]() | Teledyne HiRel | AND GATE, TRIPLE 3-INPUT RoHS : Not Compliant | 0 | |||
M38510/75702BCA![]() | Teledyne HiRel | HEX INVERTER, SCHMITT TRIGGER RoHS : Not Compliant | 0 | |||
M38510/75703BRA![]() | Teledyne HiRel | BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| M38510/75603BRA | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH CLOCK ENABLE RoHS : Not Compliant | 0 | |||
M38510/75704B2A![]() | Teledyne HiRel | BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
M38510/75001BCA![]() | Teledyne HiRel | NAND GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
| M38510/75503BZA | Teledyne HiRel | BUS TRANSCEIVER, 8-BIT, BIDIRECTIONAL, WITH 3-STATE INPUTS/OUTPUTS RoHS : Not Compliant | 0 | |||
M38510/75304BEA![]() | Teledyne HiRel | FLIP-FLOP, JK, DUAL, POSITIVE EDGE-TRIGGERED, WITH CLEAR AND SET RoHS : Not Compliant | 0 | |||
M38510/75701BDA![]() | Teledyne HiRel | HEX INVERTER RoHS : Not Compliant | 0 | |||
M38510/75601BRA![]() | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH CLEAR RoHS : Not Compliant | 0 | |||
M38510/75702B2A![]() | Teledyne HiRel | HEX INVERTER, SCHMITT TRIGGER RoHS : Not Compliant | 0 | |||
M38510/75201B2A![]() | Teledyne HiRel | OR GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
M38510/75204BCA![]() | Teledyne HiRel | AND GATE, TRIPLE 3-INPUT RoHS : Not Compliant | 0 | |||
| M38510/75302BDA | Teledyne HiRel | FLIP-FLOP, D-TYPE, DUAL, POSITIVE EDGE-TRIGGERED, WITH CLEAR AND SET RoHS : Not Compliant | 0 | |||
![]() Venkel Ltd. | PWCR0805-RK-1075FT | VENKEL LTD | Pulse Withstanding CR;0805;1/8W;�100PPM;10.7M;�1% RoHS : Compliant | 0 | ||
| PWCR1206-UK-1075FT | VENKEL LTD | Pulse Withstanding CR;1206;1/3W;�100PPM;10.7M;�1% RoHS : Compliant | 0 | |||
| PWCR1210-VK-1075DT | VENKEL LTD | Pulse Withstanding CR;1210;1/2W;�100PPM;10.7M;�0.5% RoHS : Compliant | 0 | |||
| CR1206-8W-1075FT | VENKEL LTD | Chip Resistor;1206;1/8W;10.7M;�1% RoHS : Compliant | 0 | |||
| PWCR0805-RK-1075DT | VENKEL LTD | Pulse Withstanding CR;0805;1/8W;�100PPM;10.7M;�0.5% RoHS : Compliant | 0 | |||
| CR0603-10W-1075FT | VENKEL LTD | Chip Resistor;0603;1/10W;10.7M;�1% RoHS : Compliant | 0 | |||
| TRCR1210-752MT | VENKEL LTD | Trimmable CR;1210;7.5K;�20% RoHS : Compliant | 0 | |||
| PWCR2512-ZK-1075FT | VENKEL LTD | Pulse Withstanding CR;2512;1.5W;�100PPM;10.7M;�1% RoHS : Compliant | 0 | |||
| CR0805-10W-1075FT | VENKEL LTD | Chip Resistor;0805;1/10W;10.7M;�1% RoHS : Compliant | 0 | |||
| CR2512-1W-1075FT | VENKEL LTD | Chip Resistor;2512;1W;10.7M;�1% RoHS : Compliant | 0 | |||
| CR2010-2W-1075FT | VENKEL LTD | Chip Resistor;2010;1/2W;10.7M;�1% RoHS : Compliant | 0 | |||
| CR0603-16W-1075FT | VENKEL LTD | Chip Resistor;0603;1/16W;10.7M;�1% RoHS : Compliant | 0 | |||
| CR1210-4W-1075FT | VENKEL LTD | Chip Resistor;1210;1/4W;10.7M;�1% RoHS : Compliant | 0 | |||
| PWCR2010-WK-1075FT | VENKEL LTD | Pulse Withstanding CR;2010;3/4W;�100PPM;10.7M;�1% RoHS : Compliant | 0 | |||
| PWCR2512-ZK-1075DT | VENKEL LTD | Pulse Withstanding CR;2512;1.5W;�100PPM;10.7M;�0.5% RoHS : Compliant | 0 | |||
![]() Vyrian | R141075000W | Radiall | RF BNC Connector, Male, Cable Mount, Crimp Terminal, Plug RoHS : Compliant | 15,208 | ||
BUK7C10-75AITE,118![]() | Nexperia | Power Field-Effect Transistor, 75A I(D), 75V, 0.01ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 13,444 | |||
UJA1075ATW/3V3/1J![]() | NXP Semiconductors | Ethernet Transceiver RoHS : Compliant | 12,656 | |||
| NCV1075P100G | onsemi | Switching Controller, Current-mode, 110kHz Switching Freq-Max, MOS, PDIP7 RoHS : Compliant | 12,547 | |||
| NCP1075P065G | onsemi | Switching Controller, Current-mode, 65kHz Switching Freq-Max, PDIP7 RoHS : Compliant | 9,827 | |||
SAA7706H/N107,557![]() | NXP Semiconductors | Digital Signal Processor, 0.4MHz, CMOS, PQFP80 RoHS : Compliant | 9,653 | |||
| UJA1075TW/3V3,118 | NXP Semiconductors | CAN Transceiver, 1-Trnsvr, PDSO32 RoHS : Compliant | 8,154 | |||
BUK6610-75C,118![]() | Nexperia | Power Field-Effect Transistor, 78A I(D), 1-Element, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant | 7,737 | |||
| TMP1075D | Texas Instruments | Serial Switch/Digital Sensor | 7,647 | |||
SAA7706H/N107,518![]() | NXP Semiconductors | Digital Signal Processor, 0.4MHz, CMOS, PQFP80 RoHS : Compliant | 7,339 | |||
| DS1075K | Analog Devices Inc | 6,915 | ||||
| EVAL-ADM1075EBZ | Analog Devices Inc | Development kits/Accessories RoHS : Compliant | 6,741 | |||
| DS1075Z-60N | Maxim Integrated Products | Analog Circuit, PDSO8 RoHS : Not Compliant | 6,323 | |||
UJA1075ATW/5V0WD,1![]() | NXP Semiconductors | CAN Transceiver, 1-Trnsvr, PDSO32 RoHS : Compliant | 4,989 | |||
| 1110751004 | Molex | Wire And Cable RoHS : Compliant | 219 | |||
![]() Waytek, Inc. | 10757690 | Aptiv PLC | Apex 2.80 20-18GA Female Term |
| 6,800 | |
| 10757671 | Aptiv PLC | Apex 2.8, 3 Way Sealed Female Assembly |
| 3,942 | ||
| 089107.5U | Littelfuse Inc | 7.5 Amp Low Profile Mini Fuse Brown Automotive Mini Fuse RoHS : Compliant |
| 3,273 | ||
| 10757690 | Aptiv PLC | Apex 2.80 20-18GA Female Term |
| 3,229 | ||
| 1410750BK0048 | ShawCor Ltd | DSG-Canusa CFW-750 extra heavy-duty heat shrink tubing is black adhesive-lined tubing built for rugged sealing and protection of cables, splices, and terminations. Its thick-wall construction supports strong abrasion resistance, moisture sealing, and durable environmental protection in harsh applications. |
| 2,495 | ||
| 1410750RD0048 | ShawCor Ltd | DSG-Canusa CFW-750 extra heavy-duty heat shrink tubing is red adhesive-lined tubing built for rugged sealing and protection of cables, splices, and terminations. Its thick-wall construction supports strong abrasion resistance, moisture sealing, and durable environmental protection in harsh applications. |
| 349 | ||
![]() Wuhan P&S | NCP81075MNTXG | onsemi | 180V,4A,High Side/Low Side Gate Driver RoHS : Compliant |
| 28,000 | |
| NCP1075STAT3G | onsemi | 700V,65KHZ,High Voltage Switching Regulator for Offline SMPS RoHS : Compliant |
| 4,000 |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |