 |
Datenblatt-Suchmaschine für elektronische Bauteile |
|
|
Datenblatt-Suchmaschine für elektronische Bauteile |
|
11112-R2 Verteiler |
| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty. BuyNow | |
 ComSIT USA | MACH11112JC | Lattice Semiconductor Corporation | CPLD MACH 1 Family 1.25K Gates 32 Macro Cells 76.9MHz 5V 44-Pin PLCC RoHS : Not Compliant | 160 | ||
| MACH11112JC14JI | AMD | EE PLD, 12ns, 32-Cell, CMOS, PQCC44 RoHS : Not Compliant | 134 | |||
 Interstate Connecting Components | 55D1111-22-9-9(S82M) | TE Connectivity | 55D1111-22-9-9(S82M) | 0 | ||
| 55PC1111-22-9-3 | TE Connectivity | 55PC1111-22-9-3 RoHS : Compliant | 0 | |||
| 55PC1111-22-9-9CS2606 | TE Connectivity | 55PC1111-22-9-9CS2606 | 0 | |||
| 44A0111-12-45-MX | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 44A1111-22-2-2 | TE Connectivity | 44A1111-22-2-2 RoHS : Compliant | 0 | |||
| T2111122101-000 | TE Connectivity | HMN-012-M RoHS : Compliant |
| 0 | ||
| M85049/111-12TN05-6D | Amphenol PCD | 38999 SI/II Backshell Pre-Shield ENP |
| 0 | ||
| M85049/111-12TN05-6D | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Compliant | 0 | |||
| M85049/111-12TZ01-6D | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Compliant | 0 | |||
| M85049/111-12TZ01-6D | Amphenol PCD | M85049111-12TZ01-6D | 0 | |||
| 99M0111-12-1 | TE Connectivity | 99M0111-12-1 RoHS : Compliant |
| 0 | ||
| 44A1111-20-9-2 | TE Connectivity | 44A1111-20-9-2 RoHS : Compliant | 0 | |||
| 44A1111-22-0-9 | TE Connectivity | 44A1111-22-0-9 RoHS : Compliant | 0 | |||
| 55A0111-12-6 | TE Connectivity | 55A0111-12-6 RoHS : Compliant | 0 | |||
| 55A1111-20-9-9.M | TE Connectivity | 55A1111-20-9-9 | 0 | |||
 Chip 1 Exchange | 211981-1112 | Molex | INSTOCK | 52,884 | ||
| 55A1111-22-9-9CS3477 | TE Connectivity | INSTOCK RoHS : Compliant | 11,397 | |||
| 105411-1112 | Molex | INSTOCK | 11,124 | |||
| 55A1111-20-9-9CS3477 | TE Connectivity | INSTOCK RoHS : Compliant | 5,389 | |||
| 55A1111-22-9-9CK0001 | TE Connectivity | INSTOCK RoHS : Compliant | 5,077 | |||
| 875611112 | Amphenol FCi | INSTOCK | 3,950 | |||
| 111112-1125 | Molex | INSTOCK | 2,620 | |||
| 100F0111-12 | TE Connectivity | INSTOCK RoHS : Compliant | 2,515 | |||
| A1C/11.11.2008 | INSTOCK | 2,360 | ||||
| 111112-6433 | Molex | INSTOCK | 1,310 | |||
| 74ACT11112D | INSTOCK | 373 | ||||
| QR/P1-PC2A-111(12) | INSTOCK | 370 | ||||
| 875611112 | HTCHI | INSTOCK | 250 | |||
| 875611112- | Amphenol FCi | INSTOCK | 200 | |||
| 11-11205-00 | INSTOCK | 1 | ||||
 Avnet Asia | 1111128272 | Molex | (Alt: 1111128272) RoHS : Compliant | 0 | ||
| 10170913-11112C0LF | Amphenol Corporation | (Alt: 10170913-11112C0LF) RoHS : Compliant | 0 | |||
| G14A421211112HR | Amphenol Corporation | (Alt: G14A421211112HR) RoHS : Compliant | 0 | |||
| 809-0011-112 | Amphenol Corporation | SCREW WITH WASHER, 0-80 X 18MM STAINLESS (Alt: 809-0011-112) RoHS : Compliant | 0 | |||
| 2002411112 | Molex | Pin Header, 2 Contacts, 1 Row, 5.7mm, Matte Tin, 26A, Straight, Shrouded, Copper, Wire-to-Board, THT (Alt: 2002411112) RoHS : Compliant | 0 | |||
 Avnet Silica | S1WM-1111279006-00000000-00001 | Seoul Semiconductor | (Alt: S1WM-1111279006-00000000-00001) RoHS : Compliant | 0 | ||
| S1WM-1111279009-0000003S-00001 | Seoul Semiconductor | (Alt: S1WM-1111279009-0000003S-00001) RoHS : Compliant | 0 | |||
| S1W0-1111278003-0000003S-00001 | Seoul Semiconductor | MID POWER Y11 3V 2700K CRI 80 3STEP (Alt: S1W0-1111278003-0000003S-00001) RoHS : Compliant | 0 | |||
| S1W0-1111279003-0000004S-00001 | Seoul Semiconductor | LED Chip Warm White 2700K 700mA 2Pin SMD TR (Alt: S1W0-1111279003-0000004S-00001) RoHS : Compliant | 0 | |||
| S1WM-1111279006-0000003S-00001 | Seoul Semiconductor | LED Chip Warm White 2700K 700mA 2Pin Surface Mount TR (Alt: S1WM-1111279006-0000003S-00001) RoHS : Compliant | 0 | |||
| S1W0-1111279003-0000003S-00001 | Seoul Semiconductor | LED Chip Warm White 2700K 700mA 2Pin SMD TR (Alt: S1W0-1111279003-0000003S-00001) RoHS : Compliant | 0 | |||
| S1WM-1111279009-0000004S-00001 | Seoul Semiconductor | (Alt: S1WM-1111279009-0000004S-00001) RoHS : Compliant | 0 | |||
| S1WM-1111278009-0000003S-00001 | Seoul Semiconductor | LED WICOP Y11 CCT2700K CRI80 (Alt: S1WM-1111278009-0000003S-00001) RoHS : Compliant | 0 | |||
 DB Roberts | 53-11-111-24 | Southco | 0 | |||
| 111120234E | Essentra Components | 0 | ||||
| RBF-7.1-11.1-12 | Essentra Components | 0 | ||||
| 111120230E | Essentra Components | 0 | ||||
| E5-2-111-120 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E3-1211-112 | Southco | E3-1211-112 | 0 | |||
| E3-11-112 | Southco | 0 | ||||
| 111126 | Essentra Components | 0 | ||||
| 111120236E | Essentra Components | 0 | ||||
| 47-11-112-10 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 1111200000VR | Essentra Components | 0 | ||||
| E3-101-1112 | Southco | E3-101-1112 | 0 | |||
| 47-11-112-55 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| RBF-4-11.1-12 | Essentra Components | RIVET,BARBED,BLK,.157 IN HOLE, | 0 | |||
| 111120260E | Essentra Components | 0 | ||||
 ECCO | P3-D111126W | OTTO Engineering Inc | RoHS : Compliant |
| 6 | |
 Maritex | XLY-11-11-2 | PCB-TECH | MCPCB, thermal conductivity 1.5W/(m*K), thickness: 1.6mm, number of layers - 1, black soldermask, legend color: gold, size: diameter 97mm, pad cover: gold; for XP/XT LEDs, /10 |
| 5 | |
| CAP-SP2111/12/13 | Weipu Connector | Protective cap CAP-SP2111; screw-on; internal thread for SP21 connectors |
| 2 | ||
 Neutron USA | P9-111125W | OTTO Engineering Inc | Pushbutton Switches 5A Grn Flush Dome N.O. Solder IP69K RoHS : Compliant |
| 50 | |
| P9-111126 | OTTO Engineering Inc | Pushbutton Switches 5A Blu Flush Dome N.O. Solder RoHS : Compliant |
| 50 | ||
| P3-D111122 | OTTO Engineering Inc | Pushbutton Switches Flush Dom Sldr Momentary Black RoHS : Compliant |
| 50 | ||
| P9-111129 | OTTO Engineering Inc | Pushbutton Switches 5A Wht Flush Dome N.O. Solder RoHS : Compliant |
| 35 | ||
| P1-11122 | OTTO Engineering Inc | Basic / Snap Action Switches Style A Sldr Std Black Button RoHS : Compliant |
| 23 | ||
| P9-111127W | OTTO Engineering Inc | Pushbutton Switches 5A Violet Flush Dome N.O. Solder IP69K RoHS : Compliant |
| 11 | ||
| P1-11122W | OTTO Engineering Inc | Basic / Snap Action Switches Style A Sldr Std Black Button RoHS : Compliant |
| 11 | ||
| 09459711112 | HARTING Technology Group | Ethernet Cables / Networking Cables CAT5 IP20 PATCH CABL GREEN SHEATH 10.0m RoHS : Compliant |
| 10 | ||
| B3-11112 | OTTO Engineering Inc | Basic / Snap Action Switches 8A SPNO-DB PC PINS Low Current MIL RoHS : Compliant |
| 10 | ||
| P8-111121A | OTTO Engineering Inc | Pushbutton Switches Compact Pushbutton Switch RoHS : Compliant |
| 9 | ||
| 19400111112 | HARTING Technology Group | Heavy Duty Power Connectors HAN HPR SP1 PFTSCREW LOCKING H |
| 7 | ||
| 9000-11112-2062020 | Murrelektronik GmbH | EMPARRO67POWERSUPPLY1-PHASE,IN:100-240VACOUT:24VDC/8A,PROTECTIONCLASSIP67 RoHS : Compliant |
| 6 | ||
| MT5/H-111-120 | Altech Corporation | Terminal Block Tools & Accessories Marking Tag 5mm Sold by Pack of 100 |
| 5 | ||
| P7-111121 | OTTO Engineering Inc | Basic / Snap Action Switches Standard Sldr 5A SPST-DB, SPDT-DB |
| 1 | ||
| FG-111121 | OTTO Engineering Inc | Switch Bezels / Switch Caps Red Flipguard Maint Mnt Tab, D-flat |
| 0 | ||
 Pasternack Enterprises US | PE36111-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.6/5.6, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: 1.6/5.6, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length: 12 inches. 75 Ohm 1.6/5.6 Plug to 75 Ohm 1.6/5.6 Plug Cable 12 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm 1.6/5.6 plug to 75 Ohm 1.6/5.6 plug cable 12 inch length using 75 Ohm RG179 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm 1.6/5.6 plug to 75 Ohm 1.6/5.6 plug cable 12 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.6/5.6 to 1.6/5.6 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.6/5.6 cable connection on one end and 1.6/5.6 cable connection on the other. Our 1.6/5.6 to 1.6/5.6 cable assemblies have a plug gender on end 1 and plug on end 2. This 1.6/5.6 to 1.6/5.6 cable is a plug to plug coax assembly, PE36111-12, can also be known as a 1.6/5.6 male to 1.6/5.6 male cable assembly and will be shipped same-day as it is purchased. 1.6/5.6 male to 1.6/5.6 male cable assembly PE36111-12 is built with RG179 which is a flexible coax type. The Pasternack flexible 1.6/5.6 cable assembly is manufactured with 1.6/5.6 to 1.6/5.6 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1.6/5.6 plug to 1.6/5.6 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1.6/5.6 male to 1.6/5.6 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.6/5.6 to 1.6/5.6 cable assembly for quick shipment worldwide. Variations of 1.6/5.6 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.6/5.6 plug to 75 Ohm 1.6/5.6 plug cable 12 inch length using 75 Ohm RG179 coax. |
| 823 | |
| PE3C0111-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to N Male Right Angle With Times Connectors Cable 12 Inch Length Using LMR-600 Coax., Radio frequency assembly N male to N male right angle with times connectors cable 12 inch length using LMR-600 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to N male right angle with times connectors cable 12 inch length using LMR-600 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle N type cable connection on the other. Our low loss type N to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This type N to N type cable is a male to male coax assembly, PE3C0111-12, can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C0111-12 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0111-12 can also be used in the other direction and will be right angle N type male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle with times connectors cable 12 inch length using LMR-600 coax. |
| 170 | ||
| PE3M0111-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/119-RG174-0XDS2, RF Cable Type: M17/119-RG174, RF Cable Impedance: 50 Ohm, Length: 12 inches. MIL-DTL-17 SMA Male to TNC Male Cable 12 Inch Length Using M17/119-RG174 Coax., Radio frequency assembly MIL-DTL-17 SMA male to TNC male cable 12 inch length using M17/119-RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male to TNC male cable 12 inch length using M17/119-RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/55-3026 SMA to M39012/26-0018 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/55-3026 SMA cable connection on one end and M39012/26-0018 TNC cable connection on the other. Our M39012/55-3026 SMA to M39012/26-0018 TNC cable assemblies have a male gender on end 1 and male on end 2. This M39012/55-3026 SMA to M39012/26-0018 TNC cable is a male to male coax assembly, PE3M0111-12, can also be known as a MIL-DTL-17/MIL-C-17 M39012/55-3026 SMA plug to M39012/26-0018 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/55-3026 SMA plug to M39012/26-0018 TNC plug cable assembly PE3M0111-12 is built with M17/119-RG174 which is a flexible coax type. The Pasternack flexible M39012/55-3026 SMA cable assembly is manufactured with M39012/55-3026 SMA to M39012/26-0018 TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/55-3026 SMA male to M39012/26-0018 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0111-12 can also be used in the other direction and will be M39012/26-0018 TNC male to M39012/55-3026 SMA male cable assembly if the opposite connectivity is required. M39012/55-3026 SMA plug to M39012/26-0018 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/55-3026 SMA to M39012/26-0018 TNC cable assembly for quick shipment worldwide. Variations of M39012/55-3026 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male to TNC male cable 12 inch length using M17/119-RG174 coax. |
| 6 | ||
| PE3W11112LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58-TPX, RF Cable Type: RG58-TPX, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3W11112 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58-TPX, RF Cable Type: RG58-TPX, RF Cable Impedance: 50 Ohm. BNC Male to SMA Male Cable Using RG58 Coax. PE3W11112 is a BNC male to SMA male cable using RG58-TPX coax. This Pasternack BNC male to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our male BNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11112 BNC male to SMA male cable assembly is constructed with RG58-TPX coax. | 0 | |||
| PE3C11112-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to TNC Male Low Loss Cable 60 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11112-60 low loss TNC male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our TNC to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11112-60 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11112-60 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. Our TNC male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11112-60 TNC plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 60-inch-long low loss RF cable are available on our downloadable PDF datasheet. This low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C11112 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Low Loss Cable Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11112 low loss TNC male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our TNC to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11112 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11112 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. Our TNC male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11112 TNC plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. This low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. | 0 | |||
| PE3C11112-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Male to TNC Male Low Loss Cable 12 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11112-12 low loss TNC male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our TNC to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11112-12 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11112-12 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. Our TNC male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11112-12 TNC plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 12-inch-long low loss RF cable are available on our downloadable PDF datasheet. This low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C3111-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tin/Nickel, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. UHF Male to UHF Male Low Loss Cable 12 Inch Length Using LMR-600-DB Coax with Times Microwave Components., Radio frequency assembly UHF male to UHF male low loss cable 12 inch length using LMR-600-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The UHF male to UHF male low loss cable 12 inch length using LMR-600-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom UHF to UHF cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a UHF cable connection on one end and a UHF cable connection on the other. Our low loss a UHF to a UHF cable assembly has male gender on end 1 and male on end 2. PE3C3111-12 can also be known as a low loss UHF plug to UHF plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3111-12 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. UHF plug to UHF plug cable assembly PE3C3111-12 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to UHF cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tin/nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss UHF plug to UHF plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality UHF to UHF cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal UHF to UHF low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C11112-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Male to TNC Male Low Loss Cable 24 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11112-24 low loss TNC male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our TNC to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11112-24 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11112-24 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. Our TNC male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11112-24 TNC plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 24-inch-long low loss RF cable are available on our downloadable PDF datasheet. This low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C11112-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Male to TNC Male Low Loss Cable 36 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11112-36 low loss TNC male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our TNC to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11112-36 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11112-36 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. Our TNC male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11112-36 TNC plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 36-inch-long low loss RF cable are available on our downloadable PDF datasheet. This low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C11112-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Male to TNC Male Low Loss Cable 48 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11112-48 low loss TNC male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our TNC to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11112-48 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11112-48 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. Our TNC male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11112-48 TNC plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 48-inch-long low loss RF cable are available on our downloadable PDF datasheet. This low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3111-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male Right Angle to SMB Plug Right Angle Cable 12 Inch Length Using RG174 Coax., Radio frequency assembly SMA male right angle to SMB plug right angle cable 12 inch length using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMB plug right angle cable 12 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SMB cable connection on the other. Our right angle SMA to right angle SMB cable assembly has male gender on end 1 and plug on end 2. PE3111-12 can also be known as a right angle SMA plug to right angle SMB male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PE dielectric type. SMA plug to SMB male cable assembly PE3111-12 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMB cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3111-12 RF cable are available on our downloadable PDF datasheet.PE3111-12 can also be used in the other direction and will be right angle SMB plug to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
 Sager | 11112 | Keystone Electronics Corp | Circuit Board Hardware - PCB .150 x .453 Fork Term .148 Dia RoHS : Compliant |
| 0 | |
| 55PC2111-12-9-9-L016 | TE Connectivity | TE Connectivity | 0 | |||
| 61111231-E-0-N | Carling Technologies | Rocker Switches 61111231E0N |
| 0 | ||
| 44A0111-12-0-US | TE Connectivity | Hook-up Wire RoHS : Compliant |
| 0 | ||
| T2111122101-000 | TE Connectivity | Heavy Duty Power Connectors HMN-012-M RoHS : Compliant |
| 0 | ||
| IEG1111-27933-1-V | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| IELHK1111-25914-4-V | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| IELHKM1111-2REG4-31847-7 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| IULHK1111-25978-102 | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 0 | ||
| HTLT4-111121AA12 | OTTO Engineering Inc | Joysticks CASTLE, THREADED, GATED, 22 AWG |
| 0 | ||
| HMTSW-111-12-L-Q-200 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| HMTSW-111-12-S-D-200 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| 9733011112 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9811111112 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| R11-1-12.0A-31579-4 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
 TE Connectivity | 44A0111-12-0-MX | TE Connectivity | 44A0111-12-0 Cable Type: Spec 44 Operating Voltage: 600 V Wire & Cable Insulation Material: Modified Radiation Cross-linked PVDF Conductor Material: Tin-Coated Copper Wire Size: 12 AWG Spec 44 600 V Modified Radiation Cross-linked PVDF Tin-Coated Copper | Hook Up Wire | Part Number: 44A0111-12-0-MX | Internal Number: 282262-000 | Alias Number: 2-1192111-6 | 12 AWG | TE Connectivity RoHS : Compliant |
| 1,393 | |
| 211112-4 | TE Connectivity | AMPLIMITE,SHL,RCPT 11C1,TIN FINISH Number of Positions: 11 Connector & Housing Type: Receptacle Connector System: Cable-to-Cable Connector Mounting Type: Panel Mount Connector Shell Size: 2 D-Shaped Connector | 11 Receptacle Cable-to-Cable Panel Mount | Part Number: 211112-4 | Internal Number: 211112-4 | TE Connectivity RoHS : Compliant |
| 79 | ||
| 6-2271111-2 | TE Connectivity | M12, MALE, A CODE, 12P, PG9,SHIELDED(AU) Connector System: Cable-to-Cable Circular Connector Type: Circular Connector Plug Number of Positions: 12 Circular Connector Shell Size: 20 Sealable: Yes Cable-to-Cable Circular Connector Plug 12 20 | Standard Circular Connector | Part Number: 6-2271111-2 | Internal Number: 6-2271111-2 | TE Connectivity RoHS : Compliant |
| 41 | ||
| 5-211112-1 | TE Connectivity | RECEPT ASSY,SZ 2,AMPLIMITE Number of Positions: 11 Connector & Housing Type: Receptacle Connector System: Cable-to-Cable Connector Mounting Type: Panel Mount Connector Shell Size: 2 D-Shaped Connector | 11 Receptacle Cable-to-Cable Panel Mount | Part Number: 5-211112-1 | Internal Number: 5-211112-1 | TE Connectivity RoHS : Compliant |
| 37 | ||
| 29-111-12A | TE Connectivity | Relay 29-111-12A Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 1 Form A SPST-NO Contact Current Rating: 120 A General Purpose Power Relay DC Monostable 1 Form A SPST-NO | Power Relay & 120A & Standard & Monostable & Dc | Part Number: 29-111-12A | Internal Number: K1126415 | TE Connectivity RoHS : Compliant |
| 6 | ||
 Waytek, Inc. | T120I0K2 111-12201 | HellermannTyton | HellermannTyton T120I0K2 heavy-duty cable tie is a high-strength self-locking nylon tie with a 11.8" length for securing larger wire bundles, hoses, and tubing. Its one-piece heavy-duty design supports dependable hold and cleaner harness routing in demanding applications. |
| 14,550 | |
| T120L9K2 111-12419 | HellermannTyton | HellermannTyton T120L9K2 heavy-duty cable tie is a high-strength self-locking nylon tie with a 30" length for securing larger wire bundles, hoses, and tubing. Its one-piece heavy-duty design supports dependable hold and cleaner harness routing in demanding applications. |
| 5,350 | ||
| 111-12302 | HellermannTyton | HellermannTyton 111-12302 wide cable tie is a self-locking nylon tie designed for broader bundle contact and secure fastening in demanding applications. Its one-piece wide-body construction supports reliable hold, cleaner harness organization, and stable routing of larger bundles. RoHS : Compliant |
| 3,900 | ||
| T120S0K2 111-12803 | HellermannTyton | HellermannTyton T120S0K2 heavy-duty cable tie is a high-strength self-locking nylon tie with a 9" length for securing larger wire bundles, hoses, and tubing. Its one-piece heavy-duty design supports dependable hold and cleaner harness routing in demanding applications. |
| 2,300 | ||
| T120L0K2 111-12405 | HellermannTyton | HellermannTyton T120L0K2 heavy-duty cable tie is a high-strength self-locking nylon tie with a 30" length for securing larger wire bundles, hoses, and tubing. Its one-piece heavy-duty design supports dependable hold and cleaner harness routing in demanding applications. |
| 1,100 |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
German ▼ 
English
Chinese
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand