| Datenblatt-Suchmaschine für elektronische Bauteile |
|
112-6R8-R Verteiler |
| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty. BuyNow | |
![]() Avnet Americas | RC1005F5112CS | Samsung Electro-Mechanics | - Tape and Reel (Alt: RC1005F5112CS) RoHS : Compliant |
| 90,000 | |
| CR0603-FX-5112ELF | Bourns Inc | - Tape and Reel (Alt: CR0603-FX-5112ELF) RoHS : Compliant |
| 25,000 | ||
| 1-1123724-2 | TE Connectivity | - Bag (Alt: 1-1123724-2) RoHS : Compliant |
| 15,415 | ||
| B81123C1102M3 | TDK Corporation | - Bulk (Alt: B81123C1102M003) RoHS : Compliant |
| 7,800 | ||
| MXL86112C-AQB-T | MaxLinear Inc | Single Port Gigabit Ethernet PHY, 3.13 V to 3.46 V, 40 Pins, VQFN-EP - Trays (Alt: MXL86112C-AQB-T) RoHS : Not Compliant |
| 4,900 | ||
| 55/7311-26-0/9-0CS2738 | TE Connectivity | - Bag (Alt: 161886-000) RoHS : Compliant |
| 2,080 | ||
| 105429-2112 | Molex | - Tape and Reel (Alt: 1054292112) RoHS : Compliant |
| 1,800 | ||
ASFL1-12.000MHZ-EK-T![]() | Abracon Corporation | Oscillator, 12 MHz, 30 ppm, SMD, 5mm x 3.2mm, 3.3 V, HCMOS / TTL, ASFL1 - Tape and Reel (Alt: ASFL1-12.000MHZ-EK-T) RoHS : Compliant |
| 1,000 | ||
| IPT1-120-01-H-D-RA | Samtec Inc | - Rail/Tube (Alt: IPT1-120-01-H-D-RA) RoHS : Compliant |
| 284 | ||
| M39014/01-1234 | Kyocera AVX Components | - Bulk (Alt: M39014/01-1234) RoHS : Not Compliant |
| 279 | ||
| MS3112E8-4S | ITT Interconnect Solutions | - Bulk (Alt: MS3112E8-4S) RoHS : Not Compliant | 174 | |||
| 133-3711-201 | Bel Fuse | - Bag (Alt: 133-3711-201) RoHS : Compliant |
| 100 | ||
| MS3112E12-8P | ITT Interconnect Solutions | - Bulk (Alt: MS3112E12-8P) RoHS : Not Compliant | 49 | |||
| BBS-112-T-B | Samtec Inc | - Rail/Tube (Alt: BBS-112-T-B) RoHS : Compliant |
| 35 | ||
| RM352-059-311-2900 | Molex | Connector, Plug, 59 Contacts, 3 Rows, 1.91 mm, Gold, Beryllium Copper, Brass, Through Hole, PPS, 3 A - Bulk (Alt: RM352-059-311-2900) RoHS : Compliant |
| 5 | ||
![]() Newark | 10061122-251120HLF | Amphenol Communications Solutions | Conn Ffc/Fpc Brd, 0.3Mm, 25Pos, Rcpt; Available Until Stocks Are Exhausted |Amphenol Communications Solutions 10061122-251120HLF RoHS : Compliant |
| 4,985 | |
| 10061122-171120HLF | Amphenol Communications Solutions | Conn Ffc/Fpc Brd, 0.3Mm, 17Pos, Rcpt; Available Until Stocks Are Exhausted |Amphenol Communications Solutions 10061122-171120HLF RoHS : Compliant |
| 4,935 | ||
| 560112116112 | Wurth Elektronik | Resistor, 49K9, 0.1W, Thick Film, 0603; |Würth Elektronik 560112116112 RoHS : Compliant |
| 2,084 | ||
| 560112116112 | Wurth Elektronik | Resistor, 49K9, 0.1W, Thick Film, 0603; |Würth Elektronik 560112116112 RoHS : Compliant |
| 2,084 | ||
| SX82112811210000 | Molveno | Rocker Switch, Dpst, 20A, 250V, Panel; |Molveno SX82112811210000 RoHS : Compliant |
| 585 | ||
| ZSS-112-07-S-D-1120 | Samtec Inc | Stacking Board Connector; |Samtec, Inc. ZSS-112-07-S-D-1120 RoHS : Compliant |
| 104 | ||
| T11-211-12 | Schurter Electronic Components | Thermal Circuit Breaker, T11-211 Series; |Schurter T11-211-12 RoHS : Compliant |
| 100 | ||
| F11-20112042R | Harwin | Mezzanine Conn, Plug, 124Pos, 2Row; |Harwin F11-20112042R RoHS : Compliant |
| 98 | ||
| DSC1123DL1-125.0000 | Microchip Technology Inc | Mems Osc, 125Mhz, Lvds, Smd, 2.5Mm X 2Mm; |Microchipdirect DSC1123DL1-125.0000 RoHS : Compliant |
| 20 | ||
| DSC1123CE1-125.0000 | Microchip Technology Inc | Mems Osc, 125Mhz, Lvds, Smd, 3.2Mm X 2.5Mm; |Microchipdirect DSC1123CE1-125.0000 RoHS : Compliant |
| 15 | ||
| MPR20-N-112-1111-200 | E-T-A | Mechanical Pwr Relay, Spst-No, 12V, 200A; |Eta MPR20-N-112-1111-200 RoHS : Compliant |
| 1 | ||
| 112 | O-Z Gedney | 5 In Bonding Locknut; |Oz Gedney 112 RoHS : Not Compliant |
| 0 | ||
| 112 | CEC Industries Ltd | Lamp, Incandescent, Mini Screw, 1.2V, 264Mw; Supply Voltage:1.2V; Lamp Base Type:Miniature Screw; Bulb Size:Tl-3; Mscp:0; Average Bulb Life:5H; Product Range:-; Power Rating:264Mw Rohs Compliant: Yes |Cec Industries 112 RoHS : Compliant |
| 0 | ||
| 112 | Marathon Special Products | Medium Duty Double Row Terminal Block Rohs Compliant: Yes |Marathon Special Products 112 RoHS : Compliant |
| 0 | ||
| 112 | Keystone Electronics Corp | Negative Battery Contact; |Keystone 112 RoHS : Not Compliant |
| 0 | ||
![]() RS | 112 | Keystone Electronics Corp | BATTERY CONTACT, NEGATIVE ENCLOSURE,16MM TO 30MM DIA, TAPE & REEL RoHS : Compliant |
| 1,929 | |
| 62112421-0-0-N (621-1242100N | 62112421-0-0-N | 6211242100N) | Carling Technologies | SWITCH;SUB-MINI ROCKER;DPDT;ON-NONE-ON;CURVED ROCKER;NO LEGEND;4A;125VAC;SOLDER |
| 640 | ||
| RR112-BB-NN (CRR-00000001 | RR112-BB-NN | RR112BBNN) | Carling Technologies | SWITCH, ROCKER, ROUND, NON-ILLUMINATED, 10 AMPS, BLACK ACTUATOR, NO IMPRINTING |
| 285 | ||
| LT-1531-112-012 (GLT-00009536|LT-1531-112-012|LT1531112012) | Carling Technologies | SWITCH, TOGGLE, SPST,(ON)-NONE-OFF, ILLUM PADDLE, RED-CEALR-AMBER,12V,15A,125VAC, QC |
| 246 | ||
| LRR112-1B-JN (LRR-00000008 | LRR112-1B-JN | LRR1121BJN) | Carling Technologies | ROCKER SWITCH, SPDT, ON-NONE-OFF, 125V NEON AMBER, 10A, QC, RR/LRR SERIES |
| 186 | ||
| 1SNA112086R0200 (011208602) | TE Connectivity | TERMINAL BLOCK CONNECTOR, ENTRELEC, DR1 5 / 5, SNA SERIES |
| 159 | ||
| LRR112-3B-KN (LRR-00000032 | LRR112-3B-KN | LRR1123BKN) | Carling Technologies | SWITCH ROCKER, ROUND, ILLUMINATED, RR/LRR SERIES |
| 20 | ||
| LRR112-2B-JN (LRR-00000010|LRR112-2B-JN|LRR1122BJN) | Carling Technologies | SWITCH ROCKER, SPDT, ON-NONE-OFF, 125V NEON, RED, 10A, 125VAC, QC, RR/LRR SERIES |
| 18 | ||
| 64111210 (641-11210000|64111210|64111210) | Carling Technologies | SWITCH, PUSHBUTTON, COMPACT,641 SERIES |
| 6 | ||
| 64111215 (641-11215000|64111215|64111215) | Carling Technologies | SWITCH, PUSHBUTTON, COMPACT,641 SERIES |
| 4 | ||
| GA2-B1-12-440-11-ME (GA2B11244011ME|GA2-B1-12-440-11-ME|GA2B11244011ME) | Carling Technologies | CIRCUIT BREAKER HYDRAULIC/MAGNETIC 2 POLE SPDT DIN RAIL MOUNT 4A DUAL LEGEND |
| 4 | ||
| 62112481-0-0-N (621-1248100N|62112481-0-0-N|6211248100N) | Carling Technologies | SWITCH, ROCKER, 611/621 SERIES |
| 1 | ||
| 112 | RACO | 3-1/2" OCTAGON BOX 1-1/2" DEEP 1/2" KNOCKOUT NON-METALLIC CLAMP |
| 0 | ||
| 112 | Arrow Hart | RECP SINGLE SURFACE 50A 125/250V 3P3W BK |
| 0 | ||
| 112 | EiKO Global LLC | 1.2V .25A TL-3 MINIATURE SCREW BASE |
| 0 | ||
![]() STMicroelectronics | STBP112CVDJ6F | STMicroelectronics | Overvoltage protection device RoHS : Compliant |
| 56,225 | |
| LDL112PV18R | STMicroelectronics | 1.2 A low quiescent current LDO with reverse current protection RoHS : Compliant |
| 6,726 | ||
LK112SM18TR![]() | STMicroelectronics | Low noise and low drop voltage regulator with shutdown function RoHS : Compliant |
| 2,288 | ||
LK112M25TR![]() | STMicroelectronics | Low noise and low drop voltage regulator with shutdown function RoHS : Compliant |
| 2,219 | ||
| AIS1120SXTR | STMicroelectronics | Automotive MEMS accelerometer sensor, single-axis for central airbag applications, AEC-Q100 qualified RoHS : Compliant |
| 1,210 | ||
| BALF-112X-02D3 | STMicroelectronics | 50Ω / conjugate match to CC1120, CC1125 433MHz Balun Transformer & Integrated Filtering RoHS : Compliant |
| 779 | ||
| TSU112IYST | STMicroelectronics | Nanopower (900 nA) high accuracy (150 µV) 5V CMOS Auto Op-Amp RoHS : Compliant |
| 312 | ||
| LDL112D33R | STMicroelectronics | 1.2 A low quiescent current LDO with reverse current protection RoHS : Compliant |
| 0 | ||
| STTH112UFY | STMicroelectronics | Automotive 1200 V, 1 A Ultrafast Diode RoHS : Compliant |
| 0 | ||
| BALF-112X-01D3 | STMicroelectronics | 50Ω / conjugate match to CC1120, CC1125 868MHz & 915MHz Balun Transformer & Integrated Filtering RoHS : Compliant |
| 0 | ||
| STTH112A | STMicroelectronics | High Voltage Ultrafast Rectifier Diode RoHS : Compliant |
| 0 | ||
| LDL112PU18R | STMicroelectronics | 1.2 A low quiescent current LDO with reverse current protection RoHS : Compliant |
| 0 | ||
| LDL112D10R | STMicroelectronics | 1.2 A low quiescent current LDO with reverse current protection RoHS : Compliant |
| 0 | ||
| LDL112PV15R | STMicroelectronics | 1.2 A low quiescent current LDO with reverse current protection RoHS : Compliant |
| 0 | ||
| LDL112D18R | STMicroelectronics | 1.2 A low quiescent current LDO with reverse current protection RoHS : Compliant |
| 0 | ||
![]() Microchip Technology Inc | DSC1121DI5-112.0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 112MHz, 10PPM, 2.5-3.3V, -40 to 85C, 2.5 x 2.0mm, VDFN, Projected EOL: 2050-12-28 RoHS : Compliant |
| 3,803 | |
| DSC1121DI5-112.0000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 112MHz, 10PPM, 2.5-3.3V, -40 to 85C, 2.5 x 2.0mm, VDFN, Projected EOL: 2050-12-28 RoHS : Compliant |
| 3,803 | ||
| DSC1121AI1-125.0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 125MHz, 50PPM, 2.5-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2041-02-26 RoHS : Compliant |
| 2,405 | ||
| DSC1121AE1-125.0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 125MHz, 50PPM, 2.5-3.3V, -20 to 70C, 7.0 x 5.0mm, VDFN, Projected EOL: 2051-04-09 RoHS : Compliant |
| 2,405 | ||
| DSC1121AE1-125.0000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 125MHz, 50PPM, 2.5-3.3V, -20 to 70C, 7.0 x 5.0mm, VDFN, Projected EOL: 2041-01-06 RoHS : Compliant |
| 2,405 | ||
| DSC1121AI1-125.0000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 125MHz, 50PPM, 2.5-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2051-04-09 RoHS : Compliant |
| 2,405 | ||
| DSC1122AI1-125.0000 | Microchip Technology Inc | MEMS OSC, PECL, 125MHz, 50PPM, 2.5-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2041-06-02 RoHS : Compliant |
| 685 | ||
| DSC1123AE1-125.0000 | Microchip Technology Inc | MEMS OSC, LVDS, 125MHz, 50PPM, 2.5-3.3V, -20 to 70C, 7.0 x 5.0mm, VDFN, Projected EOL: 2041-03-05 RoHS : Compliant |
| 685 | ||
| DSC1123AI1-120.0000 | Microchip Technology Inc | MEMS OSC, LVDS, 120MHz, 50PPM, 2.5-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2051-04-09 RoHS : Compliant |
| 685 | ||
| DSC1123AI1-125.0000 | Microchip Technology Inc | MEMS OSC, LVDS, 125MHz, 50PPM, 2.5-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2041-01-06 RoHS : Compliant |
| 685 | ||
| DSC1122AI1-125.0000T | Microchip Technology Inc | MEMS OSC, PECL, 125MHz, 50PPM, 2.5-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2051-04-09 RoHS : Compliant |
| 685 | ||
| DSC1123AE1-125.0000T | Microchip Technology Inc | MEMS OSC, LVDS, 125MHz, 50PPM, 2.5-3.3V, -20 to 70C, 7.0 x 5.0mm, VDFN, Projected EOL: 2041-09-23 RoHS : Compliant |
| 685 | ||
DSC1123AI1-120.0000T![]() | Microchip Technology Inc | MEMS OSC, LVDS, 120MHz, 50PPM, 2.5-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2041-04-29 RoHS : Compliant |
| 685 | ||
| DSA1124DL1-125.0000VAO | Microchip Technology Inc | MEMS OSC, AUTO, HCSL, 125MHz, 50PPM, 2.5-3.3V, -40 to 105C, 2.5 x 2.0mm, VDFN, Projected EOL: 2051-08-11 RoHS : Compliant |
| 279 | ||
| DSA1123CA1-125.0000VAO | Microchip Technology Inc | MEMS OSC, AUTO, LVDS, 125MHz, 50ppm, 2.5-3.3V, -40 to 125C, 3.2x2.5mm, VDFN, Projected EOL: 2051-05-02 RoHS : Compliant |
| 110 | ||
![]() Rochester Electronics | KTY81/120,112![]() | NXP Semiconductors | PTC Thermistor 1 kOhm TO-226-2 Tube RoHS : Compliant |
| 1,597,306 | |
BLA1011-2,112![]() | NXP Semiconductors | RF Power Field-Effect Transistor, 1-Element, L Band, Silicon, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant |
| 19 | ||
74HC112PW,112![]() | NXP Semiconductors | J-K Flip-Flop, HC/UH Series, 2-Func, Negative Edge Triggered, 2-Bit, Complementary Output, CMOS, PDSO16 RoHS : Compliant |
| 3,492 | ||
74HCT112DB,112![]() | NXP Semiconductors | Flip Flop Negative Edge 2 Element 5V 16-SOP Tube RoHS : Compliant |
| 3,276 | ||
KTY81/122,112![]() | NXP Semiconductors | PTC Thermistor 1.01 kOhm TO-226-2 Tube RoHS : Compliant |
| 136,247 | ||
74HCT112PW,112![]() | NXP Semiconductors | J-K Flip-Flop, HCT Series, 2-Func, Negative Edge Triggered, 2-Bit, Complementary Output, CMOS, PDSO16 RoHS : Compliant |
| 4,416 | ||
74ABT04N,112![]() | NXP Semiconductors | Inverter, ABT Series, 6-Func, 1-Input, BICMOS, PDIP14 RoHS : Compliant |
| 2,679 | ||
74ABT16373BDL,112![]() | NXP Semiconductors | Latch 8 Bits D-Type Transparent Latch 5V 48-SOP RoHS : Not Compliant |
| 5,704 | ||
74ABT20D,112![]() | NXP Semiconductors | Logic IC NAND Gate 2 Element 5V 14-SOIC Tube RoHS : Compliant |
| 2,166 | ||
74HC112PW,112![]() | Nexperia | J-K Flip-Flop, HC/UH Series, 2-Func, Negative Edge Triggered, 2-Bit, Complementary Output, CMOS, PDSO16 RoHS : Compliant |
| 4,549 | ||
74HCT112PW,112![]() | Nexperia | J-K Flip-Flop, HCT Series, 2-Func, Negative Edge Triggered, 2-Bit, Complementary Output, CMOS, PDSO16 RoHS : Compliant |
| 32,296 | ||
| R3112N181A-TR-FE | Nisshinbo Micro Devices | Supervisory Circuit 1.8V SOT-23-5 T/R RoHS : Compliant |
| 3,000 | ||
| R3112Q351A-TR-FE | Nisshinbo Micro Devices | Supervisory Circuit 3.5V SOT-343 T/R RoHS : Compliant |
| 9,000 | ||
R3112Q351A-TR-FE![]() | Ricoh Electronic Devices Co Ltd | Supervisory Circuit 3.5V SOT-343 T/R RoHS : Compliant |
| 12,000 | ||
| SI52112-A1-GM2R | Skyworks Solutions Inc | Clock and Timing Specialized ICs PCI Express (PCIe) 100MHz 10-SON T/R RoHS : Compliant |
| 20,084 | ||
![]() Sager | 112 | Keystone Electronics Corp | Battery Contacts S/M COIN CELL CNCT NEGATIVE 16mm UP RoHS : Compliant |
| 0 | |
| 112 | Signal Transformer Inc | Autotransformers Step Down Auto Transformer | 0 | |||
| 0011211277 | Molex | Molex | 0 | |||
| CA1-X0-11-241-121-C | Carling Technologies | Circuit Breakers | 0 | |||
| IULHK112-36111-2 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| T1911241125-000 | TE Connectivity | Rectangular MIL Spec Connectors H24BPR-TSHK-M25 RoHS : Compliant | 0 | |||
| 0011211215 | Molex | Other Tools | 0 | |||
| 0011211260 | Molex | Molex | 0 | |||
| 1731121122 | Molex | D-Sub Tools & Hardware |
| 0 | ||
| 1731121128 | Molex | D-Sub Tools & Hardware RoHS : Compliant | 0 | |||
| LT-1541-121-125 | Carling Technologies | Toggle Switches LT1541121125 RoHS : Compliant |
| 0 | ||
| 9721120112 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9811211122 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| AP112-25611-2 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 0011211254 | Molex | Molex | 0 | |||
![]() Interstate Connecting Components | 112 | Keystone Electronics Corp | NEGATIVE BATTERY CONTACT RoHS : Compliant |
| 6,350 | |
| 112288-1112 | ITT Interconnect Solutions | MKJ4NW-CS-H-168 | 0 | |||
| 55A1121-12-0/2-9 | TE Connectivity | 55A1121-12-0/2-9 RoHS : Compliant | 0 | |||
| 44A1121-12-6/9-9 | TE Connectivity | 44A1121-12-6/9-9 RoHS : Compliant | 0 | |||
| GMPM2-E112PT-18J1-12000M-958C | Glenair Inc | COMBO MICRO-D HIGH POWER | 0 | |||
| 801-011-12ZN21-12EB | Glenair Inc | 0 | ||||
| 801-011-22M21-12ED | Glenair Inc | RoHS : Compliant | 0 | |||
| 55A1121-12-2/6-9 | TE Connectivity | 55A1121-12-2/6-9 RoHS : Compliant | 0 | |||
| 801-011-12C21-12SC | Glenair Inc | 0 | ||||
| 801-011-12NF21-12PA | Glenair Inc | RoHS : Not Compliant | 0 | |||
| 801-011-22C21-12PA | Glenair Inc | 0 | ||||
| 801-011-22NF21-12EC | Glenair Inc | RoHS : Not Compliant | 0 | |||
| 801-011-22ZN21-12FD | Glenair Inc | 0 | ||||
| 801-011-22ZN21-12SA | Glenair Inc | 0 | ||||
| 121-123-1-1-12BTC | Glenair Inc | 0 | ||||
![]() PUI | 12.89112 | 21,038 | ||||
| 2011-2X10G01SB | 6,345 | |||||
| 2111-2X01G00SB | 1,341 | |||||
| 2011-2X10TSB | Oupiin | RoHS : Compliant | 1,105 | |||
| 3112-50G00SBA | 832 | |||||
| 2011-2X36G01SJ023B | 813 | |||||
| 2011-2X20G01RB | 788 | |||||
| 2011-2X05G01SK028B | 668 | |||||
| 2011-2X36G01SH028B | 543 | |||||
| 2111-2X04G00S/3.2/8.9B | 375 | |||||
| 2011-2X13G01SH028B | 200 | |||||
| 2011-2X15G00SJ030B | 115 | |||||
| 2011-2X01G00SH032B | 77 | |||||
| 2011-2X07G01SD025B | 64 | |||||
| 2011-2X01G10S-2.3-6.1B-HT | 24 | |||||
![]() Chip 1 Exchange | 223857811121- | YAGEO Corporation | INSTOCK | 43,500 | ||
| 223857811121 | INSTOCK | 40,000 | ||||
| SMBD1122LT1G | onsemi | INSTOCK | 21,000 | |||
| 1011-267-0605 | TE Connectivity | INSTOCK RoHS : Compliant | 3,473 | |||
| 2112297-1 | TE Connectivity | INSTOCK RoHS : Compliant | 3,318 | |||
| 11-21SURC/S530 | INSTOCK | 3,285 | ||||
| B81121-C-B112 | INSTOCK | 1,585 | ||||
| HA11223W | INSTOCK | 885 | ||||
| QH11121-DAT1-4F | Foxconn | INSTOCK RoHS : Not Compliant | 188 | |||
74HC238PW,112![]() | NXP Semiconductors | INSTOCK RoHS : Compliant | 175 | |||
| VX-8112-24.0000MHZ | INSTOCK | 75 | ||||
| VTP-1112 | INSTOCK | 75 | ||||
| 112J-TDAR-R01 | Attend Technology Inc | INSTOCK | 50 | |||
| 112X10 DII | INSTOCK | 39 | ||||
| NT-2101126 | OMRON Corporation | INSTOCK | 2 | |||
![]() Avnet Asia | CT DELSS1.12-BA-36-N6U6-R18 | ams OSRAM Group | OOSCT DELSS1.12-BA-36-N6U6-R18 Q65113A72 (Alt: CT DELSS1.12-BA-36-N6U6-R18) RoHS : Compliant |
| 45,000 | |
| CT DBLP31.12-8C-56-J6Q4-20-R18-XX | ams OSRAM Group | OOSCT DBLP31.12-8C-56-J6Q4-20-R18-XX Q65 (Alt: CT DBLP31.12-8C-56-J6Q4-20-R18-XX) RoHS : Compliant |
| 40,000 | ||
| PGL6181.121HLT | Pulse Electronics Corporation | POWER INDUCTOR (Alt: PGL6181.121HLT) RoHS : Compliant | 20,800 | |||
| 11-22/R8G6C-A30/2T | Everlight Electronics Co Ltd | (Alt: 11-22/R8G6C-A30/2T) RoHS : Compliant |
| 20,000 | ||
| C0603C560J5GAC3112 | KEMET Corporation | (Alt: C0603C560J5GAC3112) RoHS : Compliant |
| 15,000 | ||
| KT DELQS1.12-UHVH-36-S4A6-10-R18 | ams OSRAM Group | LED Single Chip Green 528nm 30mA 2-Pin SMD T/R (Alt: KT DELQS1.12-UHVH-36-S4A6-10-R18) RoHS : Compliant | 15,000 | |||
| FL4800112 | Diodes Incorporated | (Alt: FL4800112) RoHS : Compliant |
| 15,000 | ||
| NCV1124DR2G | onsemi | (Alt: NCV1124DR2G) RoHS : Compliant | 12,500 | |||
| G846A060112LS4HR | Amphenol Corporation | (Alt: G846A060112LS4HR) RoHS : Compliant |
| 5,200 | ||
| ACJ2112 | Panasonic Electronic Components | (Alt: ACJ2112) RoHS : Compliant | 5,000 | |||
| 10146065-112S0LF | Amphenol Corporation | Connector Card Edge Receptacle 98 Position 1mm Straight Surface Mount (Alt: 10146065-112S0LF) RoHS : Compliant | 2,100 | |||
| 80-M1126PA010M7-K217F70-/5A/ | MACOM | Transistor I GBT Module N-CH 1200V 10A ?20V Screw Mount (Alt: 80-M1126PA010M7-K217F70-/5A/) RoHS : Compliant |
| 360 | ||
| 10161122-1240110LF | Amphenol Corporation | FCI10161122-1240110LF MTK PWR CEM5 VERTI (Alt: 10161122-1240110LF) RoHS : Compliant | 350 | |||
| CB1-12V | Panasonic Electronic Components | Automotive Relays (Alt: CB1-12V) RoHS : Compliant | 250 | |||
| BCS-112-L-D-TE | Samtec Inc | PCB Receptacle, Board-to-Board, 2.54 mm, 2 Rows, 24 Contacts, Through Hole Mount, BCS Series (Alt: BCS-112-L-D-TE) RoHS : Compliant | 5 | |||
![]() Flip Electronics | NIS5112D2R2G![]() | onsemi | Stock, Ship Today RoHS : Compliant | 9,056 | ||
| NCP1129BP65G | onsemi | Stock, Ship Today RoHS : Compliant |
| 7,850 | ||
LPC1112FHI33/203,5![]() | NXP Semiconductors | Stock RoHS : Compliant | 7,840 | |||
| TJA1128BTK/1Z | NXP Semiconductors | Stock RoHS : Compliant | 6,000 | |||
LPC1112FHN33/202:5![]() | NXP Semiconductors | Stock RoHS : Compliant | 4,680 | |||
| LC05112C01MTTTG | onsemi | Stock, Ship Today RoHS : Compliant |
| 4,000 | ||
| NCP1126AP100G | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,550 | ||
| BLS6G2731-120,112 | Flip Electronics Manufacturing Services | Stock, Ship Today | 885 | |||
| MPC5554MZP112R2 | NXP Semiconductors | Stock RoHS : Not Compliant | 470 | |||
| BLF573S,112 | Flip Electronics Manufacturing Services | Stock, Ship Today | 376 | |||
| BLS7G2325L-105,112 | Flip Electronics Manufacturing Services | Stock, Ship Today | 370 | |||
| BLF6G13LS-250P,112 | Flip Electronics Manufacturing Services | Stock, Ship Today | 278 | |||
| BLA6G1011-200R,112 | Flip Electronics Manufacturing Services | Stock, Ship Today |
| 259 | ||
| BLF174XR,112 | Flip Electronics Manufacturing Services | Stock, Ship Today | 10 | |||
| BLS6G3135-120,112 | Flip Electronics Manufacturing Services | Stock, Ship Today | 10 | |||
![]() Master Electronics | 112 | JKL Components Corporation | TL-3 Miniature Screw Lamp RoHS : Compliant |
| 100 | |
| 112 | Marathon Special Products | Conn Barrier Strip 24 POS 9.5mm Screw Panel Mount 20A RoHS : Compliant |
| 55 | ||
| 112288-1112 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| 55A1121-12-0/2-9 | TE Connectivity | Two Conductor Cable Shielded Jacketed 600 Volt MOQ Reduction RoHS : Compliant |
| 0 | ||
| RT8420-0001-112-1120 | TE Connectivity | RT8420-0001-112-1120: CTO-11500000-15 RoHS : Compliant |
| 0 | ||
| M911221CI1-125M0000 | Microchip Technology Inc | Defense Apps MEMS OSC 125MHz LVCMOS -40-85C 50ppm 3.2x2 RoHS : Compliant |
| 0 | ||
| DSC1122CI1-125.0000T | Microchip Technology Inc | MEMS OSC PECL 125MHz 50PPM 2.5-3.3V -40 to 85C 3.2 x 2 RoHS : Compliant |
| 0 | ||
| LT-1541-121-125 | Carling Technologies | LT-SERIES TOGGLE SWITCH RoHS : Compliant |
| 0 | ||
| RT8420-0010-112-1120 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| HMTSW-112-21-S-D-1120 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 111112-1125 | Molex | RoHS : Compliant |
| 0 | ||
| MTSW-111-21-L-S-1120 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DSC1121AL5-112.2400T | Microchip Technology Inc | CMOS Oscillator - 112.24 MHz ±10ppm - Output Enable - 2.25 to 3.6V - 6-lead VDFN - –40°C to +105°C - Tape&Reel RoHS : Compliant |
| 0 | ||
| DSC1121CE1-124.2000 | Microchip Technology Inc | CMOS Oscillator - 124.2 MHz ±50ppm - Output Enable - 2.25 to 3.6V - 6-lead VDFN - –20°C to +70°C RoHS : Compliant |
| 0 | ||
DSC1123AI1-120.0000T![]() | Microchip Technology Inc | MEMS OSC LVDS 120MHz 50PPM 2.5-3.3V -40 to 85C 7.0 x 5 RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W11251-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male Right Angle to N Male Low Loss Cable 12 Inch Length Using LMR-240-DB Coax., Radio frequency assembly N male right angle to N male low loss cable 12 inch length using LMR-240-DB coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N male low loss cable 12 inch length using LMR-240-DB coax, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and type N cable connection on the other. Our low loss right angle N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W11251-12 can also be known as a low loss right angle type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3W11251-12 is built with LMR-240-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type right angle male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11251-12 can also be used in the other direction and will be type N male to right angle type N male cable assembly if the opposite connectivity is required. Low loss N type right angle plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N male low loss cable 12 inch length using LMR-240-DB coax. |
| 1,602 | |
| PE3C4401-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 12 inches. SSMC Plug to TNC Male Cable 12 Inch Length Using RG178 Coax., Radio frequency assembly SSMC plug to TNC male cable 12 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SSMC plug to TNC male cable 12 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMC cable connection on one end and TNC cable connection on the other. Our SSMC to TNC cable assemblies have a plug gender on end 1 and male on end 2. This SSMC to TNC cable is a plug to male coax assembly, PE3C4401-12, can also be known as a SSMC male to TNC plug cable assembly and will be shipped same-day as it is purchased. SSMC male to TNC plug cable assembly PE3C4401-12 is built with RG178 which is a flexible coax type. The Pasternack flexible SSMC cable assembly is manufactured with SSMC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 2 GHz maximum frequency SSMC plug to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4401-12 can also be used in the other direction and will be TNC male to SSMC plug cable assembly if the opposite connectivity is required. SSMC male to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMC to TNC cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMC plug to TNC male cable 12 inch length using RG178 coax. |
| 104 | ||
| PE3C6191-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Plenum 7/16 DIN Male to N Female Bulkhead Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 7/16 DIN male to N female bulkhead low PIM cable 12 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male to N female bulkhead low PIM cable 12 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NF-BH-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-716M-LP 7/16 DIN cable connection on one end and TC-SPP250-NF-BH-LP type N bulkhead cable connection on the other. Our low PIM TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NF-BH-LP N type cable assemblies have a male gender on end 1 and female on end 2. This TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NF-BH-LP type N cable is a male to female coax assembly, PE3C6191-12, can also be known as a low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-NF-BH-LP type N jack cable assembly and will be shipped same-day as it is purchased. TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-NF-BH-LP N type jack cable assembly PE3C6191-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-716M-LP 7/16 DIN cable assembly is manufactured with TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NF-BH-LP N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-716M-LP 7/16 DIN male to TC-SPP250-NF-BH-LP type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6191-12 can also be used in the other direction and will be TC-SPP250-NF-BH-LP type N female bulkhead to TC-SPP250-716M-LP 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-NF-BH-LP type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NF-BH-LP N type cable assembly for quick shipment worldwide. Variations of TC-SPP250-716M-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male to N female bulkhead low PIM cable 12 inch length using SPP-250-LLPL coax using Times Microwave parts. |
| 42 | ||
| PE3C8511-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 7 inches. Outdoor Rated 7/16 DIN Male to 7/16 DIN Female Cable Using SPO-250 Coax Using Times Microwave Parts in 12 inch., Radio frequency assembly outdoor rated 7/16 DIN male to 7/16 DIN female cable using SPO-250 coax using Times Microwave parts in 12 inch from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male to 7/16 DIN female cable using SPO-250 coax using Times Microwave parts in 12 inch, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and female on end 2. This 7/16 DIN to 7/16 DIN cable is a male to female coax assembly, PE3C8511-12, can also be known as a low PIM 7/16 DIN plug to 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN jack cable assembly PE3C8511-12 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to 7/16 DIN female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8511-12 can also be used in the other direction and will be 7/16 DIN female to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to 7/16 DIN jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male to 7/16 DIN female cable using SPO-250 coax using Times Microwave parts in 12 inch. |
| 11 | ||
| PE-W112S001-12 | Pasternack Enterprises | Key Specifications, Waveguide Size 1: WR-112, Flange Size 1: UG-51/U, Waveguide Size 2: WR-112, Flange Size 2: UG-51/U, Length: 12 inches, Frequency, Min: 7.05 GHz, Frequency, Max: 10 GHz. WR-112 Commercial Grade Straight Waveguide Section 12 Inch Length with UG-51/U Flange Operating from 7.05 GHz to 10 GHz. PE-W112S001-12 WR-112 waveguide section is straight and is 12 inches long. This 12 inch WR-112 straight waveguide section from Pasternack is commercial grade and has a UG-51/U flange. Our straight WR-112 waveguide section with UG-51/U flange has a minimum frequency of 7.05 GHz and a maximum frequency of 10 GHz. WR-112 waveguide section PE-W112S001-12 is part of over 40,000 RF, microwave and millimeter wave components. Our commercial grade WR-112 straight waveguide section will ship same the day as it is purchased worldwide as with our other RF parts. |
| 0 | ||
| PE3C0661-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. HN Male to SHV Plug Cable 12 Inch Length Using RG223 Coax., Radio frequency assembly HN male to SHV plug cable 12 inch length using RG223 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The HN male to SHV plug cable 12 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to SHV cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with HN cable connection on one end and SHV cable connection on the other. Our HN to SHV cable assembly has male gender on end 1 and plug on end 2. PE3C0661-12 can also be known as a HN plug to SHV male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. HN plug to SHV male cable assembly PE3C0661-12 is built with RG223 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to SHV cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C0661-12 RF cable are available on our downloadable PDF datasheet.PE3C0661-12 can also be used in the other direction and will be SHV plug to HN male cable assembly if the opposite connectivity is required. HN plug to SHV male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to SHV cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal HN RF cable assembly as per your requirements. |
| 0 | ||
| PE3C1121/SP | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Female to Reverse Polarity SMA Male Right Angle Low Loss Cable Using LMR-195 Coax with HeatShrink, LF Solder., Radio frequency assembly reverse polarity SMA female to reverse polarity SMA male right angle low loss cable using LMR-195 coax with heatshrink, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. Reverse polarity SMA female to reverse polarity SMA male right angle low loss cable using LMR-195 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and right angle reverse polarity SMA cable connection on the other. Our low loss reverse polarity SMA to right angle reverse polarity SMA cable assemblies have a female gender on end 1 and male on end 2. This reverse polarity SMA to reverse polarity SMA cable is a female to male coax assembly, PE3C1121/SP, can also be known as a low loss reverse polarity SMA jack to right angle reverse polarity SMA plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA jack to reverse polarity SMA plug cable assembly PE3C1121/SP is built with LMR-195 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA female to reverse polarity SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1121/SP can also be used in the other direction and will be right angle reverse polarity SMA male to reverse polarity SMA female cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity jack to SMA reverse polarity right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA female to reverse polarity SMA male right angle low loss cable using LMR-195 coax with heatshrink, LF solder. | 0 | |||
| PE3C11263 | Pasternack Enterprises | 0 | ||||
| PE3C1128-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. N Male to SMA Female Low Loss Cable 150 cm Length Using PE-P142LL Coax, RoHS., Radio frequency assembly N male to SMA female low loss cable 150 cm length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to SMA female low loss cable 150 cm length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low loss type N to SMA cable assemblies have a male gender on end 1 and female on end 2. This type N to SMA cable is a male to female coax assembly, PE3C1128-150CM, can also be known as a low loss type N plug to SMA jack cable assembly and will be shipped same-day as it is purchased. N type plug to SMA jack cable assembly PE3C1128-150CM is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency type N male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1128-150CM can also be used in the other direction and will be SMA female to N type male cable assembly if the opposite connectivity is required. Low loss N type plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to SMA female low loss cable 150 cm length using PE-P142LL coax, RoHS. |
| 0 | ||
| PE3C1271-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male Right Angle to TNC Male Right Angle Low Loss Cable 12 Inch Length Using PE-P142LL Coax, RoHS., Radio frequency assembly N male right angle to TNC male right angle low loss cable 12 inch length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male right angle to TNC male right angle low loss cable 12 inch length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle N type to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. This N type to TNC cable is a male to male coax assembly, PE3C1271-12, can also be known as a low loss right angle type N plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3C1271-12 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to right angle TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency N type right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1271-12 can also be used in the other direction and will be right angle TNC male to right angle type N male cable assembly if the opposite connectivity is required. Low loss N type right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to TNC male right angle low loss cable 12 inch length using PE-P142LL coax, RoHS. |
| 0 | ||
| PE3C5112 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMB Plug Right Angle Cable Using PE-P086 Coax., Radio frequency assembly SMA male right angle to SMB plug right angle cable using PE-P086 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMB plug right angle cable using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SMB cable connection on the other. Our right angle SMA to right angle SMB cable assemblies have a male gender on end 1 and plug on end 2. This SMA to SMB cable is a male to plug coax assembly, PE3C5112, can also be known as a right angle SMA plug to right angle SMB male cable assembly and will be shipped same-day as it is purchased. SMA plug to SMB male cable assembly PE3C5112 is built with PE-P086 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMB cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA right angle male to SMB right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5112 can also be used in the other direction and will be right angle SMB plug to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMB plug right angle cable using PE-P086 coax. | 0 | |||
| PE3C5193/SP1-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Female Bulkhead to SMP Female Right Angle Cable 12 Inch Length Using PE-P086 Coax with HeatShrink and 90 Deg. Clock., Radio frequency assembly SMA female bulkhead to SMP female right angle cable 12 inch length using PE-P086 coax with heatshrink and 90 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to SMP female right angle cable 12 inch length using PE-P086 coax with heatshrink and 90 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA bulkhead cable connection on one end and a right angle SMP cable connection on the other. Our SMA to right angle SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C5193/SP1-12 can also be known as a SMA jack to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5193/SP1-12 RF cable has a FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. Our bulkhead SMA female to right angle SMP female cable has a maximum VSWR of 1.4:1. SMA jack to SMP jack cable assembly PE3C5193/SP1-12 is built with PE-P086 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C5193/SP1-12 can also be used in the other direction and will be a right angle SMP female to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP RF cable assembly as per your requirements. |
| 0 | ||
| PE3C7901-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMA Female Bulkhead Cable 12 Inch Length Using RG58 Coax., Radio frequency assembly SMA male to SMA female bulkhead cable 12 inch length using RG58 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA female bulkhead cable 12 inch length using RG58 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE3C7901-12 can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C7901-12 is built with RG58 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7901-12 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead cable 12 inch length using RG58 coax. |
| 0 | ||
| PE3C8061-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 12 inches. |
| 0 | ||
| PE3M0331-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Size: 12, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Specification: MIL-STD-348, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: Coax, RF Cable Specification: PE-P047 datasheet, RF Cable Impedance : 50 Ohm. SMPM Size 12 D38999 Contact Pin to SMA Female Cable 12 Inch Length Using PE-P047 Coax with HeatShrink, LF Solder. The PE3M0331-12 from Pasternack is a D38999 contact cable assembly that is built with a size 12 mini SMP pin contact connection on one end and a SMA female connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This mini SMP to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0331-12 RF cable has a FEP jacket of 0.056-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our mini SMP pin to SMA female cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and FEP dielectric type. The PE3M0331-12 between-series RF cable has 0.4 inches of repeated minimum bend radius along with 90 dB of minimum RF shielding. Mini SMP pin to SMA female cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack PE3M0331-12 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this mini SMP to SMA RF cable are available on our downloadable PDF datasheet. Mini SMP pin to SMA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMA RF cable assembly as per your requirements. |
| 0 |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |