| Datenblatt-Suchmaschine für elektronische Bauteile |
|
11504-R2 Verteiler |
| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty. BuyNow | |
![]() Braemac Americas-Symmetry | AX3HAF1-156.2500T![]() | Abracon Corporation | 113fs 156.25MHZ HCSL XO RoHS : Compliant |
| 0 | |
| EFR32FG25A121F1152IM56-B | Silicon Laboratories Inc | FG25, Sub-GHz, 1152kB Flash, 256kB RAM, FSK/O-QPSK/OFDM, +125C, QFN56 |
| 0 | ||
AK7DAF1-156.2500T2![]() | Abracon Corporation | 115fs Ultra low jitter 5x7mm 3.3V LVDS XO RoHS : Compliant |
| 0 | ||
| AMMLPDBVRS-11.5920T | Abracon Corporation |
| 0 | |||
| AMMLPFLBXRS-11.5920T | Abracon Corporation |
| 0 | |||
| AMMLPVBLRS-11.5920T | Abracon Corporation |
| 0 | |||
| AK5DAF1-150.000T2 | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMMLPABXJS-11.5920T | Abracon Corporation |
| 0 | |||
| AMMLPEALCS-11.5920T | Abracon Corporation |
| 0 | |||
| AK5DBF1-156.2500T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMMLPDBXCS-11.5920T | Abracon Corporation |
| 0 | |||
| AMMLPEBXJS-11.5920T | Abracon Corporation |
| 0 | |||
| AMMLPVAVRS-11.5920T | Abracon Corporation |
| 0 | |||
| ACAG0301-15752450-EVB | Abracon Corporation |
| 0 | |||
AX3DBF1-156.2500T3![]() | Abracon Corporation | Low Jitter 156.25MHZ LVDS XO RoHS : Compliant |
| 0 | ||
![]() Component Electronics, Inc | CR0805F1152T1LF | Chip Technologies Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 34,800 | |
| CRCW06031150FRT1 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 5,000 | ||
| CRCW08051150FRT1 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant | 5,000 | |||
| CR21-1500F-T | Kyocera AVX Components | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,990 | ||
| NRC06F1153TRF | Nichicon Corporation | IN STOCK SHIP TODAY |
| 4,000 | ||
| BC807-40W-115 | NXP Semiconductors | IN STOCK SHIP TODAY |
| 2,995 | ||
| 13SP115 | Essentra Components | IN STOCK SHIP TODAY |
| 990 | ||
| 4116R-1-153 | Bourns Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 432 | ||
| FOX115 | Fox Electronics | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 127 | ||
| ERM1-150 | Bivar Inc | IN STOCK SHIP TODAY |
| 90 | ||
| 4116R-001-151 | Bourns Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 40 | ||
| 7-2115346 | IN STOCK SHIP TODAY | 8 | ||||
| 745211-5 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 6 | ||
| BFC237341155 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
| 3T115/960-0078 | Dell Computer | IN STOCK SHIP TODAY |
| 2 | ||
![]() Pasternack Enterprises US | PE3W18115/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. SMB Plug to BNC Female Bulkhead Cable Using RG188-DS Coax with HeatShrink., Radio frequency assembly SMB plug to BNC female bulkhead cable using RG188-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMB plug to BNC female bulkhead cable using RG188-DS coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMB to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMB cable connection on one end and a BNC bulkhead cable connection on the other. Our SMB to BNC cable assembly has a plug gender on end 1 and a female on end 2. PE3W18115/HS can also be known as a SMB male to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W18115/HS RF cable has a PTFE jacket of 0.118-inch diameter. The flexible RF cable has a between series connection. SMB male to BNC jack cable assembly PE3W18115/HS is built with RG188-DS which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W18115/HS can also be used in the other direction and will be a BNC female bulkhead to SMB plug cable assembly if the opposite connectivity is required. SMB male to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMB to BNC cable assembly for quick shipment worldwide. Variations of SMB and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB to BNC RF cable assembly as per your requirements. | 1,343 | ||
| PE3W11115/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Reverse Polarity SMA Male to N Male Right Angle Low Loss Cable 60 Inch Length Using LMR-240 Coax with HeatShrink., Radio frequency assembly reverse polarity SMA male to N male right angle low loss cable 60 inch length using LMR-240 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA male to N male right angle low loss cable 60 inch length using LMR-240 coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and right angle N type cable connection on the other. Our low loss reverse polarity SMA to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This reverse polarity SMA to type N cable is a male to male coax assembly, PE3W11115/HS-60, can also be known as a low loss reverse polarity SMA plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA plug to type N plug cable assembly PE3W11115/HS-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency reverse polarity SMA male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11115/HS-60 can also be used in the other direction and will be right angle N type male to reverse polarity SMA male cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA male to N male right angle low loss cable 60 inch length using LMR-240 coax with heatshrink. |
| 413 | ||
| PE3C1115-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Female Bulkhead to MMCX Plug Right Angle Cable 36 Inch Length Using PE-SR405FL Coax., Radio frequency assembly SMA female bulkhead to MMCX plug right angle cable 36 inch length using PE-SR405FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to MMCX plug right angle cable 36 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MMCX cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and right angle MMCX cable connection on the other. Our SMA to right angle MMCX cable assembly has female gender on end 1 and plug on end 2. PE3C1115-36 can also be known as a SMA jack to right angle MMCX male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA jack to MMCX male cable assembly PE3C1115-36 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle MMCX cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a solder/solder attachment method and a stainless steel body with gold plating. Additional dimensions, specifications and CAD drawings for this PE3C1115-36 RF cable are available on our downloadable PDF datasheet.PE3C1115-36 can also be used in the other direction and will be right angle MMCX plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to MMCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 349 | ||
| PE3M0115-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/28-RG058-0XDS2, RF Cable Type: M17/28-RG058, RF Cable Impedance: 50 Ohm, Length: 24 inches. MIL-DTL-17 BNC Male to BNC Male Cable 24 Inch Length Using M17/28-RG58 Coax., Radio frequency assembly MIL-DTL-17 BNC male to BNC male cable 24 inch length using M17/28-RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 BNC male to BNC male cable 24 inch length using M17/28-RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/16-0013 BNC to M39012/16-0013 BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/16-0013 BNC cable connection on one end and M39012/16-0013 BNC cable connection on the other. Our M39012/16-0013 BNC to M39012/16-0013 BNC cable assemblies have a male gender on end 1 and male on end 2. This M39012/16-0013 BNC to M39012/16-0013 BNC cable is a male to male coax assembly, PE3M0115-24, can also be known as a MIL-DTL-17/MIL-C-17 M39012/16-0013 BNC plug to M39012/16-0013 BNC plug cable assembly and will be shipped same-day as it is purchased. M39012/16-0013 BNC plug to M39012/16-0013 BNC plug cable assembly PE3M0115-24 is built with M17/28-RG058 which is a flexible coax type. The Pasternack flexible M39012/16-0013 BNC cable assembly is manufactured with M39012/16-0013 BNC to M39012/16-0013 BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/16-0013 BNC male to M39012/16-0013 BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. M39012/16-0013 BNC plug to M39012/16-0013 BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/16-0013 BNC to M39012/16-0013 BNC cable assembly for quick shipment worldwide. Variations of M39012/16-0013 BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 BNC male to BNC male cable 24 inch length using M17/28-RG58 coax. |
| 2 | ||
| PE3C11509 | Pasternack Enterprises | 0 | ||||
| PE3C5115 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to TNC Male Cable Using PE-P195 Coax., Radio frequency assembly SMA female bulkhead to TNC male cable using PE-P195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to TNC male cable using PE-P195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and TNC cable connection on the other. Our SMA to TNC cable assemblies have a female gender on end 1 and male on end 2. This SMA to TNC cable is a female to male coax assembly, PE3C5115, can also be known as a SMA jack to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA jack to TNC plug cable assembly PE3C5115 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this SMA female bulkhead to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5115 can also be used in the other direction and will be TNC male to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to TNC male cable using PE-P195 coax. | 0 | |||
| PE3C7851-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: NEX10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: NEX10, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. NEX10 Male to NEX10 Female Low PIM Cable 150 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly NEX10 male to NEX10 female low PIM cable 150 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. NEX10 male to NEX10 female low PIM cable 150 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom NEX10 to NEX10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with NEX10 cable connection on one end and NEX10 cable connection on the other. Our low PIM NEX10 to NEX10 cable assemblies have a male gender on end 1 and female on end 2. This NEX10 to NEX10 cable is a male to female coax assembly, PE3C7851-150CM, can also be known as a low PIM NEX10 plug to NEX10 jack cable assembly and will be shipped same-day as it is purchased. NEX10 plug to NEX10 jack cable assembly PE3C7851-150CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM NEX10 male to NEX10 female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7851-150CM can also be used in the other direction and will be NEX10 female to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this NEX10 male to NEX10 female low PIM cable 150 cm length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3W05115-12 | Pasternack Enterprises |
| 0 | |||
| PE3W11518 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. N Male to 3.5mm Male Cable Using PE-SR405FLJ Coax. PE3W11518 is a N male to 3.5mm male cable using PE-SR405FLJ coax. This Pasternack N male to 3.5mm male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm 3.5mm for connector 2. Our male N to male 3.5mm cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W11518 N male to 3.5mm male cable assembly is constructed with PE-SR405FLJ coax. | 0 | |||
| PE3W11563 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to SMA Male Cable Using PE-SR405FLJ Coax. PE3W11563 is a MMCX plug right angle to SMA male cable using PE-SR405FLJ coax. This Pasternack MMCX plug right angle to SMA male cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. MMCX right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to male SMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W11563 MMCX plug right angle to SMA male cable assembly is constructed with PE-SR405FLJ coax. | 0 | |||
| PE3W11570-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male Right Angle to SMA Male Low Loss Cable 36 Inch Length Using PE-C100-LSZH Coax., Radio frequency assembly SMA male right angle to SMA male low loss cable 36 inch length using PE-C100-LSZH coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA male low loss cable 36 inch length using PE-C100-LSZH coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our low loss right angle SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3W11570-36, can also be known as a low loss right angle SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W11570-36 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA right angle male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11570-36 can also be used in the other direction and will be SMA male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male low loss cable 36 inch length using PE-C100-LSZH coax. |
| 0 | ||
| PE3W21157 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMB Jack to BNC Male Cable Using RG178 Coax. PE3W21157 is a SMB jack to BNC male cable using RG178 coax. This Pasternack SMB jack to BNC male cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm BNC for connector 2. Our jack SMB to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21157 SMB jack to BNC male cable assembly is constructed with RG178 coax. | 0 | |||
| PEWCT1115D | Pasternack Enterprises |
| 0 | |||
| PE1WAN051-15 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-51, Gain Min: 15, Beam Width, 3dB V: 32, Beam Width, 3dB H: 31, Frequency, Min: 15 GHz, Frequency, Max: 22 GHz. WR-51 Waveguide Antenna, 15 GHz to 22 GHz Frequency Range, 15 dBi Gain, Integrated Cage-Style Mount. The PE1WAN051-15 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-51 input and a waveguide to coaxial transition adapter. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use and microwave radio systems. Our WR-51 standard gain horn antenna with a input has a minimum frequency of 15 GHz and a maximum frequency of 22 GHz. Pasternack’s PE1WAN051-15 waveguide horn antenna has a typical gain of 15 dB. Our waveguide antenna has a typical vertical beam width of 32 degrees and a horizontal beam width of 31 degrees at 3 dB. This antenna has a length of 10.3 inches, a width of 7 inches, and a weight of 0.91 lbs. This WR-51 waveguide horn antenna with 15 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE3C0115-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 48 inches. TNC Male to TNC Male With Times Connectors Cable 48 Inch Length Using LMR-100 Coax., Radio frequency assembly TNC male to TNC male with times connectors cable 48 inch length using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. TNC male to TNC male with times connectors cable 48 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to TNC cable is a male to male coax assembly, PE3C0115-48, can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C0115-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male with times connectors cable 48 inch length using LMR-100 coax. |
| 0 | ||
![]() Venkel Ltd. | C0603C0G201-150FNP | VENKEL LTD | HV Chip Capacitor;0603;C0G;200V;15pF;�1% RoHS : Compliant | 8,000 | ||
| C0805C0G501-152FNE | VENKEL LTD | HV Chip Capacitor;0805;C0G;500V;1500pF;�1% RoHS : Compliant | 0 | |||
| C0805C0G601-152KNE | VENKEL LTD | HV Chip Capacitor;0805;C0G;600V;1500pF;�10% RoHS : Compliant | 0 | |||
| C1812X7R601-152KNE | VENKEL LTD | HV Chip Capacitor;1812;X7R;600V;1500pF;�10% RoHS : Compliant | 0 | |||
C0805HQN101-151FNE![]() | VENKEL LTD | High-Q NP0 Chip Capacitor;0805;HQN;100V;150pF;�1% RoHS : Compliant | 0 | |||
| C0805HQN501-150FNP | VENKEL LTD | High-Q NP0 Capacitor;0805;HQN;500V;15pF;�1% RoHS : Compliant | 0 | |||
C1206X7R101-152MNE![]() | VENKEL LTD | Chip Capacitor;1206;X7R;100V;1500pF;�20% RoHS : Compliant | 0 | |||
| CRG2512-X-1153FT | VENKEL LTD | RoHS 10/10 Green CR;2512;1W;115K;�1% RoHS : Compliant | 0 | |||
| CRS0402-16W-1153FT | VENKEL LTD | Anti-Sulfuration CR;0402;1/16W;115K ;�1% RoHS : Compliant | 0 | |||
| CR0805-10W-1155FT | VENKEL LTD | Chip Resistor;0805;1/10W;11.5M;�1% RoHS : Compliant | 0 | |||
| CR1206-8W-1154FT | VENKEL LTD | Chip Resistor;1206;1/8W;1.15M;�1% RoHS : Compliant | 0 | |||
| TFCR0402-16W-K-1152DT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�100PPM;11.5K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0603-10W-C-1151BT-1K | VENKEL LTD | Thin Film CR;0603;1/10W;�50PPM;1.15K;�0.1% RoHS : Compliant | 0 | |||
| TFCR0603-10W-E-1152CT-1K | VENKEL LTD | Thin Film CR;0603;1/10W;�25PPM;11.5K;�0.25% RoHS : Compliant | 0 | |||
| TFCR0603-10W-E-1152DT | VENKEL LTD | Thin Film CR;0603;1/10W;�25PPM;11.5K;�0.5% RoHS : Compliant | 0 | |||
![]() Vyrian | PDTA115TK,115 | NXP Semiconductors | RoHS : Compliant | 12,920 | ||
PDTC115EEF,115![]() | NXP Semiconductors | Small Signal Bipolar Transistor, 0.02A I(C), 50V V(BR)CEO, 1-Element, NPN, Silicon | 10,250 | |||
PDTC115EE,115![]() | NXP Semiconductors | Small Signal Bipolar Transistor, 0.02A I(C), 50V V(BR)CEO, 1-Element, NPN, Silicon RoHS : Compliant | 7,140 | |||
| PBHV9115T,115 | Nexperia | Small Signal Bipolar Transistor, 1A I(C), 150V V(BR)CEO, 1-Element, PNP, Silicon, TO-236AB RoHS : Compliant | 7,089 | |||
| PDTC115EK,115 | NXP Semiconductors | RoHS : Compliant | 6,455 | |||
| PDTA115EK,115 | NXP Semiconductors | RoHS : Compliant | 4,597 | |||
| XCKU115-2FFVA1156E | AMD Xilinx | Field Programmable Gate Array, 1451100-Cell, PBGA1156 RoHS : Compliant | 3,959 | |||
PDTA115EE,115![]() | NXP Semiconductors | Small Signal Bipolar Transistor, 0.02A I(C), 50V V(BR)CEO, 1-Element, PNP, Silicon RoHS : Compliant | 3,950 | |||
| XCKU115-2FFVA1156C | AMD Xilinx | Field Programmable Gate Array, 1451100-Cell, PBGA1156 RoHS : Compliant | 3,609 | |||
PDTC115TK,115![]() | Nexperia | 3,326 | ||||
| XCKU115-1FFVA1156E | AMD Xilinx | Field Programmable Gate Array, 1451100-Cell, PBGA1156 RoHS : Compliant | 3,184 | |||
| XCKU115-1FFVA1156C | AMD Xilinx | Field Programmable Gate Array, 1451100-Cell, PBGA1156 RoHS : Compliant | 1,595 | |||
| XCKU115-2FFVA1156I | AMD Xilinx | Field Programmable Gate Array, 1451100-Cell, PBGA1156 RoHS : Compliant | 1,381 | |||
| XCKU115-1FFVA1156I | AMD Xilinx | Field Programmable Gate Array, 1451100-Cell, PBGA1156 RoHS : Compliant | 1,228 | |||
| BPSC00101151150M00 | Pulse Electronics Corporation | General Purpose Inductor, 15uH, 20%, 1 Element, Ferrite-Core, SMD, 4141 RoHS : Compliant | 449 | |||
![]() Waytek, Inc. | 13711548 | Aptiv PLC | 1.0 MM Female Terminal HES TXL 18-16GA .75-1.00 MM2 3000/Reel DEUTSCH 1062-20-0222 RoHS : Compliant |
| 18,000 | |
| AL-11-50-CW-0-C | Advanced Cable Ties Inc | ACT AL-11-50-CW-0-C cold weather cable tie is a UV black nylon tie rated 50 lb. with an 11.25" length and 3.06" max bundle diameter. It is engineered for -40F to 165F operation, resists impact and UV exposure, and helps prevent cracking or breaking in severe cold-weather installations. |
| 9,100 | ||
| 13711546-L | Aptiv PLC | The Aptiv 13711546-L HES 1.0 unsealed female socket terminal fits 22-20 Ga. TXL wire with a 0.35-0.50 mm cable range and contact size 20. Its nickel-plated stainless steel construction protects the contact interface and supports higher current capability. Rated from -67F to 257F, it is compatible with SAE, DIN, JIS, and MIL 39029 terminal systems. |
| 2,855 | ||
| 13711542-L | Aptiv PLC | 1.0 MM Male Terminal HES TXL 22-20 .35-.50 MM2 1371152 DEUTSCH 1060-20-0222 |
| 2,850 | ||
| RT40R0C3 115-06200 | HellermannTyton | HellermannTyton RT40R0C2 releasable cable tie is an 8.5" reusable self-locking tie built for temporary or serviceable wire and cable bundling. Its releasable head design allows adjustment or removal without cutting, making it useful for maintenance, testing, and rework applications. |
| 2,300 | ||
| 184115-1 | TE Connectivity | AMP Sealed Sensor 12 Position Plug Assembly Connector Center Pitch 4.8mm RoHS : Compliant |
| 881 | ||
| T150XL0X2 111-15500 | HellermannTyton | HellermannTyton T150XL0X2 heavy-duty cable tie is a high-strength self-locking nylon tie with a 43" length for securing larger wire bundles, hoses, and tubing. Its one-piece heavy-duty design supports dependable hold and cleaner harness routing in demanding applications. |
| 475 | ||
| 175-S1-150-2 | MP | 150A Push Trip Reset 1/4" Stud Surface S X S Circuit Breaker |
| 301 | ||
| 11-502 | Pollak | Pollak 11-502 5-way trailer connector socket is rated for 12-24VDC and 15A. Its round chrome-plated metal housing provides five circuits for trailer wiring and mates with the Pollak 11-501 connector plug. |
| 277 | ||
| P115BDA | Gigavac LLC | 12V MiniTactor 50A Contactor Bi-Directional UL SPST-NO P115 disc by way |
| 141 | ||
| SSC21-150 | InPower Semiconductor Company Ltd | Second Generation Smart Contactor 150Amps, 12/24VDC |
| 30 | ||
| 141150 | OptiFuse | Panel Mount Circuit Breaker Automatic, 42VDC, 150A |
| 24 | ||
| 586-911 586-305111 | White-Rodgers | Power Relay Contactor 12V 200A SPDT White-Rodgers 586-911 600A INRUSH ISOLATED COIL |
| 0 | ||
| 22115-300 | Eaton Electronics | 15 AMP Circuit Breaker Type 1 ATC/ATO Bussmann 22115-300 |
| 0 | ||
| 1-1563759-1 | TE Connectivity | The TE Connectivity 1-1563759-1 HDSCS Series sealed female receptacle housing provides 18 circuits for commercial vehicle and off-road electrical systems. Rated IP67, 60VDC, and 40A, it accepts AMP MCP 1.5K female terminals and uses TE's stamped-and-formed contact system. An attached receptacle seal supports protected, dependable connections in demanding environments. RoHS : Compliant |
| 0 | ||
![]() Wuhan P&S | NCP115AMX280TCG | onsemi | - RoHS : Compliant |
| 5,000 | |
| 115780 | Vishay Intertechnologies | - |
| 10 |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |