| Datenblatt-Suchmaschine für elektronische Bauteile |
|
1306F-R18K Verteiler |
| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty. BuyNow | |
![]() Coilcraft Direct | CMT1-3.0-6L | Coilcraft Inc | Common mode choke, toroid, RoHS RoHS : Compliant |
| 0 | |
![]() Ameya Holding Limited | DS1306EN+T&R | Analog Devices Inc | DS1306 Series 5.5 V Serial / 3-Wire / SPI Through Hole Real Time Clock -TSSOP-20 RoHS : Compliant | 1,396 | ||
![]() NexGen Digital | 91601-306ALF | Amphenol FCi | RoHS : Compliant | 10,800 | ||
| 0022013067 | Molex | RoHS : Compliant | 10,108 | |||
| MADP-13068 | MACOM | 8 | ||||
![]() Powell Electronics | MTLW-113-06-T-S-105 | Samtec Inc | PCB Header, 2.00mm Pitch, Through-Hole, RoHS : Compliant |
| 292 | |
| SSW-113-06-T-D-LL | Samtec Inc | Tiger Buy Socket Strip with PCB Tails, 0 RoHS : Compliant |
| 242 | ||
| MTSW-113-06-L-D-035 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 205 | ||
| MTMM-113-06-G-D-236 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 172 | ||
| MTMM-113-06-G-D-140 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 172 | ||
| MTMM-113-06-T-D-200 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 172 | ||
| TW-13-06-T-S-470-100 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 132 | ||
| TW-13-06-S-T-354-122 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 79 | ||
| 86130602114385E1LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 76 | ||
| ESQ-130-69-G-D | Samtec Inc | Elevated Socket Strip, 0.100" Pitch RoHS : Compliant |
| 25 | ||
| ESW-130-69-G-D | Samtec Inc | .100" Elevated Socket Strip RoHS : Compliant |
| 25 | ||
| M22-7130642 | Harwin | Headers & Wire Housings RoHS : Compliant |
| 22 | ||
| M80-4130698 | Harwin | Datamate J-Tek DIL Female Crimp Connecto RoHS : Compliant |
| 7 | ||
| 380HS121M1306A3 | Glenair Inc | ACCESSORIES - RFI/EMI NON-ENV ADAPTER |
| 3 | ||
| 390GB002NF1306H | Glenair Inc | ACCESSORIES - RFI/EMI ENVIRON ADAPTER RoHS : Not Compliant |
| 1 | ||
![]() Richardson RFPD | R141306000 | Radiall | Conn BNC F 0Hz to 4GHz 50Ohm Crimp ST Panel Mount RoHS : Compliant |
| 6 | |
| 84130698 | HUBER+SUHNER | 11_SMA-50-3-235/133_NE RoHS : Compliant |
| 3 | ||
| 570BAA001306DG | Skyworks Solutions Inc | 570BAA001306DG RoHS : Compliant |
| 0 | ||
| R141306503W | Radiall | Conn BNC 0Hz to 4GHz 50Ohm Crimp ST Cable Mount RC RoHS : Compliant |
| 0 | ||
| SI5395B-A13065-GMR | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 350MHz-OUT 6 RoHS : Compliant | 0 | |||
| MADP-042405-130600 | MACOM | RF PIN DIODE RoHS : Compliant | 0 | |||
| MADP-042308-130600 | MACOM | Surface Mount 8 uM PIN Diodes RoHS : Compliant |
| 0 | ||
| 131-3701-306 | Cinch Connectivity Solutions | Conn SMB 0Hz to 4GHz 50Ohm Solder RA Thru-Hole RCP RoHS : Compliant |
| 0 | ||
| SKY67161-306LF | Skyworks Solutions Inc | RF Amp Single LNA 849MHz 5.5V 16-Pin QFN EP T/R RoHS : Compliant | 0 | |||
| 571AJC001306DG | Skyworks Solutions Inc | Oscillator VCXO 10MHz 1.5ppm (Tol) ±20ppm (Stabili RoHS : Compliant |
| 0 | ||
| A-1PA-113-064B2 | Amphenol Corporation | Cable Assembly 1.13mm Cable 0.064m AMC to AMC PL-P RoHS : Compliant |
| 0 | ||
DS1306E+![]() | Maxim Integrated Products | Real Time Clock Serial 96byte Clock/Calendar/Alarm RoHS : Compliant | 0 | |||
| 130602-HMC942LP4E | Analog Devices Inc | HMC942lp4E RF Multiplier Evaluation Board RoHS : Compliant |
| 0 | ||
| 133-3701-306 | Cinch Connectivity Solutions | Conn MCX 0Hz to 6GHz 50Ohm Solder RA Thru-Hole RCP RoHS : Compliant |
| 0 | ||
| 5-146130-6 | TE Connectivity | Conn Unshrouded Header HDR 14 POS 2.54mm Solder ST RoHS : Compliant |
| 0 | ||
![]() Rutronik | 91601-306ALF | Amphenol Communications Solutions | 06P BTB REC SR SMT RoHS : Compliant |
| 6,000 | |
| 76341-306LF | Amphenol Communications Solutions | 06P BTB REC SR THT RoHS : Compliant |
| 4,142 | ||
![]() Avnet Silica | L130-6580HE1400005 | Lumileds | LED UniColor White 27lm 6500K Chip LED 2Pin SMD TR (Alt: L130-6580HE1400005) RoHS : Compliant | 180,000 | ||
| CMA1306-0000-000F0Z0A30H | Cree, Inc. | XLamp LED Chip Array Warm White 3000K Tray (Alt: CMA1306-0000-000F0Z0A30H) RoHS : Compliant | 300 | |||
| UES1306TR | Microchip Technology Inc | (Alt: UES1306/TR) RoHS : Not Compliant | 0 | |||
| USC1306SMD.TR | Semtech Corporation | Diode Switching 400V 5A 2Pin Case G4 (Alt: USC1306SMD.TR) RoHS : Not Compliant | 0 | |||
| R5F51306BDFN#50 | Renesas Electronics Corporation | Microcontroller 32Bit RX RISC 64Kbyte ROM 33V5V 64Pin LQFP (Alt: R5F51306BDFN#50) RoHS : Compliant | 0 | |||
| L130-6580HA30000B5 | Lumileds | LED Chip Cool White 6500K 480mA 2Pin SMD TR (Alt: L130-6580HA30000B5) RoHS : Compliant | 0 | |||
| CMA1306-0000-000N0B0A30E | Cree, Inc. | XLamp LED Chip Array Warm White 3000K Tray (Alt: CMA1306-0000-000N0B0A30E) RoHS : Compliant | 0 | |||
| CMB1306-0000-000F0U0A40H | Cree, Inc. | XLAMP CMB LIGHT EMITTING DIODE WHITE (Alt: CMB1306-0000-000F0U0A40H) RoHS : Compliant | 0 | |||
| CMA1306-0000-000F0H0A30H | Cree, Inc. | XLamp LED Chip Array Warm White 3000K Tray (Alt: CMA1306-0000-000F0H0A30H) RoHS : Compliant | 0 | |||
| CMB1306-R160-000F0U0A27G | Cree, Inc. | XLAMP CMB LIGHT EMITTING DIODE WHITE (Alt: CMB1306-R160-000F0U0A27G) RoHS : Compliant | 0 | |||
| CMA1306-0000-00PF0U0A50G | Cree, Inc. | XLAMP CMA LED WHITE PRO9 (Alt: CMA1306-0000-00PF0U0A50G) RoHS : Compliant | 0 | |||
| CMB1306-0000-000F0H0A27G | Cree, Inc. | XLAMP CMB LIGHT EMITTING DIODE WHITE (Alt: CMB1306-0000-000F0H0A27G) RoHS : Compliant | 0 | |||
| CMB1306-0000-000F0U0A27H | Cree, Inc. | XLAMP CMB LIGHT EMITTING DIODE WHITE (Alt: CMB1306-0000-000F0U0A27H) RoHS : Compliant | 0 | |||
| CMA1306-0000-000N0U0A40G | Cree, Inc. | XLamp LED Chip Array Neutral White 4000K Tray (Alt: CMA1306-0000-000N0U0A40G) RoHS : Compliant | 0 | |||
| BC660KGLAA-I03-SNASA/01A05-0130601306 | Quectel Wireless Solutions Co Ltd | FW BC660KGLAAR01A050130601306 (Alt: BC660KGLAA-I03-SNASA) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AMDLA1306Q-220MT![]() | Abracon Corporation | RoHS : Compliant |
| 0 | |
ABLS-13.0625MHZ-10-R20-D-T![]() | Abracon Corporation | CRYSTAL 13.0625MHZ 10PF SMD RoHS : Compliant |
| 0 | ||
| AMDLA1306Q-270MT | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AMDLA1306S-1R0MT![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AMDLA1306S-5R6MT![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AMPLA1306S-R45MT![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AMDLA1306Q-4R7MT![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AMDLA1306Q-R47MT![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-1306T-330M-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AMDLA1306S-4R7MT![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AMDLA1306S-R47MT![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AMPLA1306S-R68MT![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-1306T-680M-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AMPLA1306S-7R0MT![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-1306S-102M-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
![]() Component Electronics, Inc | 213-068-401 | Methode Electronics Inc | IN STOCK SHIP TODAY |
| 3,120 | |
| 9513-060-500 | Belden Inc | IN STOCK SHIP TODAY |
| 400 | ||
| 213-068-601 | Methode Electronics Inc | IN STOCK SHIP TODAY |
| 200 | ||
| 22-01-3067 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 147 | ||
| 133-3701-306 | Vertiv Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 142 | ||
| M39014/02-1306 | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 47 | ||
| 113.067.17 | TE Connectivity | IN STOCK SHIP TODAY | 31 | |||
| 40-1306 | International Rectifier | IN STOCK SHIP TODAY | 25 | |||
| 5-146130-6 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 14 | ||
DS1306E+![]() | Maxim Integrated Products | IN STOCK SHIP TODAY RoHS : Compliant |
| 8 | ||
| F1-3069 | FIS | IN STOCK SHIP TODAY |
| 7 | ||
LT1306ES8#PBF![]() | Linear Technology | IN STOCK SHIP TODAY RoHS : Compliant |
| 7 | ||
| 9513-060-100 | Belden Inc | IN STOCK SHIP TODAY |
| 4 | ||
| PX0413/06S/PC | Bulgin | IN STOCK SHIP TODAY RoHS : Compliant |
| 3 | ||
| N130-6510 | Ward Leonard CT LLC | IN STOCK SHIP TODAY | 1 | |||
![]() EBV Elektronik | UES1306 | Microchip Technology Inc | (Alt: UES1306) RoHS : Not Compliant | 0 | ||
| RN1306,LF(T | Toshiba America Electronic Components | (Alt: RN1306,LF(T) RoHS : Compliant | 0 | |||
| NCP81306MNTXG | onsemi | (Alt: NCP81306MNTXG) RoHS : Compliant | 0 | |||
| RN1306,LXHF(T | Toshiba America Electronic Components | Bipolar PreBiased Digital Transistor NPN 50 V 100 mA 47 kohm 47 kohm (Alt: RN1306,LXHF(T) RoHS : Compliant | 0 | |||
| CYBT-413061-02 | Infineon Technologies AG | (Alt: SP005673495) RoHS : Not Compliant | 0 | |||
| SGM61306AXN6G/TR | SG Micro Corp | (Alt: SGM61306AXN6G/TR) RoHS : Compliant | 0 | |||
MCP73113-06SI/MF![]() | Microchip Technology Inc | Battery Charger IC 1 Cells LiIon LiPol 16 V 42 V 11A 10 Pins DFNEP (Alt: MCP73113-06SI/MF) RoHS : Compliant | 0 | |||
| CP13069_IRENE-IR-4 | LEDIL | Round Lens Assembly For SFH 4715S IR LED (Alt: CP13069_IRENE-IR-4) RoHS : Compliant | 0 | |||
![]() FDH Electronics | 85901306911 | SOURIAU-SUNBANK | Circular Conn |
| 94 | |
| 06F5001R1306N-158 | SOURIAU-SUNBANK | Connector Acc | 64 | |||
| 390GB002NF1306H | Glenair Inc | Connector Acc RoHS : Not Compliant |
| 1 | ||
| 440ML135ZNU1306 | Glenair Inc | Connector Acc RoHS : Not Compliant |
| 1 | ||
| 360GS003NF1306A4 | Glenair Inc | Connector |
| 0 | ||
| 370HS001NF1306H3 | Glenair Inc | Connector RoHS : Not Compliant |
| 0 | ||
| 380HS003M1306A2 | Glenair Inc | Connector RoHS : Compliant |
| 0 | ||
| 390HS009NF1306C6 | Glenair Inc | Connector RoHS : Not Compliant |
| 0 | ||
| 360HS002M1306A3 | Glenair Inc | Connector RoHS : Compliant |
| 0 | ||
| 380HS002M1306A5 | Glenair Inc | Connector |
| 0 | ||
| 390HS007NF1306A4 | Glenair Inc | Connector |
| 0 | ||
| 319HA001M1306-6 | Glenair Inc | Connector RoHS : Compliant |
| 0 | ||
| 319HC001M1306-6 | Glenair Inc | Connector RoHS : Compliant |
| 0 | ||
| 380HS001B1306H2 | Glenair Inc | Connector RoHS : Not Compliant |
| 0 | ||
| 380HS014NF1306A3 | Glenair Inc | Connector |
| 0 | ||
![]() Maritex | ULO-TB51-306/5.0-03P-3000A | ULO | PCB terminal block; pitch 5.00mm; 3-ways; vertical; wire range 1.5mm2 (AWG 22-14); with screws for a flat screwdriver; brass cage; black color; UL 300V/10A,TUV 250V/15A |
| 6,902 | |
| CP0130611H | Cvilux Corporation | Header for PCB; pitch 4.20mm; 6-contacts [2x3]; THT; male; top entry; 2 rows; 300V/9A |
| 5,392 | ||
| 1-1903130-6 | TE Connectivity | Rectangular Connector Housings; 1-1903130-6; TE CONNECTIVITY; 2; 12; Black; Straight RoHS : Compliant |
| 2,746 | ||
| ULO-TB51-306/5.0-02P-2010A | ULO | PCB terminal block; pitch 5.00mm; 2-ways; vertical; wire range 1.5mm2 (AWG 22-14); with screws for a flat screwdriver; brass cage; blue color; UL 300V/10A, TUV 250V/15A |
| 2,047 | ||
| 1600130623 | Molex | Male Pin Headers; 1600130623; MOLEX; 5; Tin; 56 RoHS : Compliant |
| 1,727 | ||
| 22-01-3067 | Molex | Crimp terminal housing; pitch 2.54mm; 6-contacts; female; applicable wire AWG#22-28; 250V/3A RoHS : Compliant |
| 1,000 | ||
| ULO-TB51-306/5.0-03P-1110A | ULO | PCB terminal block; pitch 5.00mm; 3-ways; vertical; wire range 1.5mm2 (AWG 22-14); with screws for a cross screwdriver; brass cage; grey color; UL 300V/10A, TUV 250V/15A |
| 805 | ||
| ULO-TB51-306/5.0-02P-1110A | ULO | PCB terminal block; pitch 5.00mm; 2-ways; vertical; wire range 1.5mm2 (AWG 22-14); with screws for a cross screwdriver; brass cage; grey color; UL 300V/10A, TUV 250V/15A |
| 537 | ||
AMC1306M25DWVR![]() | Texas Instruments | Special-Purpose ADC/DAC; AMC1306M25DWVR; TEXAS INSTRUMENTS; 8; Serial; SOIC; 7.5 mm RoHS : Compliant |
| 300 | ||
| 3031306 | Phoenix Contact | Wire to Board Terminals; 3031306; PHOENIX CONTACT; 12 AWG; 28 AWG; 44 mm; 800 V RoHS : Compliant |
| 80 | ||
| DK130606_NX-24CX66SP-XP_P4M | NiViss | MCPCB for CREE XP LEDs, circle, diameter: 66mm, thickness: 2mm, white soldermask, alu 5052, 70um, RoHS |
| 22 | ||
| 1600130641 | Molex | Male Pin Headers; 1600130641; MOLEX; 5; Tin; 56; Right Angle RoHS : Compliant |
| 11 | ||
| CMA1306-0000-000C0U0A22G | Cree, Inc. | LED CMA1306-0000-000C0U0A22G, warm white 2200K, 3-step, CRI min. 90, version 9V, flux min. 665lm/800mA RoHS : Compliant |
| 5 | ||
![]() Pasternack Enterprises US | PE3C1306/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMP Female Right Angle to SMA Male Right Angle Cable 36 Inch Length Using RG178 Coax with HeatShrink., Radio frequency assembly SMP female right angle to SMA male right angle cable 36 inch length using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female right angle to SMA male right angle cable 36 inch length using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMP cable connection on one end and a right angle SMA cable connection on the other. Our right angle SMP to right angle SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C1306/HS-36 can also be known as a right angle SMP jack to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1306/HS-36 RF cable has a FEP jacket of 0.072-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 155 degrees C. The flexible RF cable has a between series connection. Our right angle SMP female to right angle SMA male cable has a maximum VSWR of 1.4:1. SMP jack to SMA plug cable assembly PE3C1306/HS-36 is built with RG178 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to right angle SMA cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the crimp/crimp attachment method and a brass body with gold plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C1306/HS-36 can also be used in the other direction and will be a right angle SMA male to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMA RF cable assembly as per your requirements. |
| 557 | |
| PE3C1306-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male Right Angle to SMP Female Right Angle Cable 12 Inch Length Using RG178 Coax., Radio frequency assembly SMA male right angle to SMP female right angle cable 12 inch length using RG178 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMP female right angle cable 12 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SMP cable connection on the other. Our right angle SMA to right angle SMP cable assembly has male gender on end 1 and female on end 2. PE3C1306-12 can also be known as a right angle SMA plug to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.393 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA plug to SMP jack cable assembly PE3C1306-12 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C1306-12 RF cable are available on our downloadable PDF datasheet.PE3C1306-12 can also be used in the other direction and will be right angle SMP female to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 557 | ||
| PE3C1306/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMP Female Right Angle to SMA Male Right Angle Cable 24 Inch Length Using RG178 Coax with HeatShrink., Radio frequency assembly SMP female right angle to SMA male right angle cable 24 inch length using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female right angle to SMA male right angle cable 24 inch length using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMP cable connection on one end and a right angle SMA cable connection on the other. Our right angle SMP to right angle SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C1306/HS-24 can also be known as a right angle SMP jack to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1306/HS-24 RF cable has a FEP jacket of 0.072-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 155 degrees C. The flexible RF cable has a between series connection. Our right angle SMP female to right angle SMA male cable has a maximum VSWR of 1.4:1. SMP jack to SMA plug cable assembly PE3C1306/HS-24 is built with RG178 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to right angle SMA cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the crimp/crimp attachment method and a brass body with gold plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C1306/HS-24 can also be used in the other direction and will be a right angle SMA male to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMA RF cable assembly as per your requirements. |
| 557 | ||
| PE3C1306/HS-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMP Female Right Angle to SMA Male Right Angle Cable 9 Inch Length Using RG178 Coax with HeatShrink., Radio frequency assembly SMP female right angle to SMA male right angle cable 9 inch length using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female right angle to SMA male right angle cable 9 inch length using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMP cable connection on one end and a right angle SMA cable connection on the other. Our right angle SMP to right angle SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C1306/HS-9 can also be known as a right angle SMP jack to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1306/HS-9 RF cable has a FEP jacket of 0.072-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 155 degrees C. The flexible RF cable has a between series connection. Our right angle SMP female to right angle SMA male cable has a maximum VSWR of 1.4:1. SMP jack to SMA plug cable assembly PE3C1306/HS-9 is built with RG178 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to right angle SMA cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the crimp/crimp attachment method and a brass body with gold plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C1306/HS-9 can also be used in the other direction and will be a right angle SMA male to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMA RF cable assembly as per your requirements. |
| 557 | ||
| PE3C1306/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMP Female Right Angle to SMA Male Right Angle Cable 12 Inch Length Using RG178 Coax with HeatShrink., Radio frequency assembly SMP female right angle to SMA male right angle cable 12 inch length using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female right angle to SMA male right angle cable 12 inch length using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMP cable connection on one end and a right angle SMA cable connection on the other. Our right angle SMP to right angle SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C1306/HS-12 can also be known as a right angle SMP jack to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1306/HS-12 RF cable has a FEP jacket of 0.072-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 155 degrees C. The flexible RF cable has a between series connection. Our right angle SMP female to right angle SMA male cable has a maximum VSWR of 1.4:1. SMP jack to SMA plug cable assembly PE3C1306/HS-12 is built with RG178 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to right angle SMA cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the crimp/crimp attachment method and a brass body with gold plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C1306/HS-12 can also be used in the other direction and will be a right angle SMA male to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMA RF cable assembly as per your requirements. |
| 557 | ||
| PE3C1306-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMA Male Right Angle to SMP Female Right Angle Cable 9 Inch Length Using RG178 Coax., Radio frequency assembly SMA male right angle to SMP female right angle cable 9 inch length using RG178 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMP female right angle cable 9 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SMP cable connection on the other. Our right angle SMA to right angle SMP cable assembly has male gender on end 1 and female on end 2. PE3C1306-9 can also be known as a right angle SMA plug to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.393 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA plug to SMP jack cable assembly PE3C1306-9 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C1306-9 RF cable are available on our downloadable PDF datasheet.PE3C1306-9 can also be used in the other direction and will be right angle SMP female to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 202 | ||
| PE3W13069-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. NEX10 Female Bulkhead to NEX10 Female Bulkhead Low PIM Cable 12 Inch Length Using SPO-250 Coax., Radio frequency assembly NEX10 female bulkhead to NEX10 female bulkhead low PIM cable 12 inch length using SPO-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 female bulkhead to NEX10 female bulkhead low PIM cable 12 inch length using SPO-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 bulkhead cable connection on one end and a NEX10 bulkhead cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has female gender on end 1 and female on end 2. PE3W13069-12 can also be known as a low PIM NEX10 jack to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W13069-12 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 jack to NEX10 jack cable assembly PE3W13069-12 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 jack bulkhead to NEX10 jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 74 | ||
| PE33130-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 60 inches. BNC Male to BNC Male Cable 60 Inch Length Using RG178 Coax., Radio frequency assembly BNC male to BNC male cable 60 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 60 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE33130-60, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE33130-60 is built with RG178 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 60 inch length using RG178 coax. |
| 26 | ||
| PE3W13066 | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. Mini SMP Female Right Angle to Slide-On BMA Plug Bulkhead Cable Using PE-SR405FLJ Coax. PE3W13066 is a Mini SMP female right angle to BMA plug bulkhead cable using PE-SR405FLJ coax. This Pasternack Mini SMP female right angle to BMA plug bulkhead cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm BMA for connector 2. Mini SMP right angle to BMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our female Mini SMP right angle to plug BMA bulkhead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W13066 Mini SMP female right angle to BMA plug bulkhead cable assembly is constructed with PE-SR405FLJ coax. | 0 | |||
| PE3CA1130-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P141, RF Cable Type: PE-P141, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to Push-On SMA Male Precision Cable 60 Inch Length Using PE-P141 Coax, LF Solder., Radio frequency assembly SMA male to push-on SMA male precision cable 60 inch length using PE-P141 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to push-on SMA male precision cable 60 inch length using PE-P141 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax precision cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our precision SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3CA1130-60, can also be known as a precision SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3CA1130-60 is built with PE-P141 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Precision SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to push-on SMA male precision cable 60 inch length using PE-P141 coax, LF solder. |
| 0 | ||
| PE3W13065 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. BNC Male to BNC Female Cable Using LMR-195 Coax. PE3W13065 is a BNC male to BNC female cable using LMR-195 coax. This Pasternack BNC male to BNC female cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13065 BNC male to BNC female cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE36130-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: MC-Card, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MC-Card, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 60 inches. MC-Card Plug Right Angle to MC-Card Plug Right Angle Cable 60 Inch Length Using RG316 Coax., Radio frequency assembly MC-Card plug right angle to MC-Card plug right angle cable 60 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MC-Card plug right angle to MC-Card plug right angle cable 60 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MC-Card to MC-Card cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MC-Card cable connection on one end and right angle MC-Card cable connection on the other. Our right angle MC-Card to right angle MC-Card cable assemblies have a plug gender on end 1 and plug on end 2. This MC-Card to MC-Card cable is a plug to plug coax assembly, PE36130-60, can also be known as a right angle MC-Card male to right angle MC-Card male cable assembly and will be shipped same-day as it is purchased. MC-Card male to MC-Card male cable assembly PE36130-60 is built with RG316 which is a flexible coax type. The Pasternack flexible MC-Card cable assembly is manufactured with right angle MC-Card to right angle MC-Card cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MC-Card right angle plug to MC-Card right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MC-Card right angle male to MC-Card right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MC-Card to MC-Card cable assembly for quick shipment worldwide. Variations of MC-Card cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MC-Card plug right angle to MC-Card plug right angle cable 60 inch length using RG316 coax. |
| 0 | ||
| PE3C11306 | Pasternack Enterprises | Key Specifications, Connector Series 1: NMO Mount, Connector Gender 1: Sexless, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. NMO Mount to UHF Female Cable Using RG58 Coax. PE3C11306 is a NMO Mount sexless to UHF female cable using RG58 coax. This Pasternack NMO Mount sexless to UHF female cable assembly uses a 50 Ohm NMO Mount for connector 1 and a 50 Ohm UHF for connector 2. Our sexless NMO Mount to female UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C11306 NMO Mount sexless to UHF female cable assembly is constructed with RG58 coax. | 0 | |||
| PE3W13061 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. SMB Jack to SMB Jack Cable Using LMR-100A-UF Coax. PE3W13061 is a SMB jack to SMB jack cable using LMR-100A-UF coax. This Pasternack SMB jack to SMB jack cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm SMB for connector 2. Our jack SMB to jack SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13061 SMB jack to SMB jack cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W13062 | Pasternack Enterprises | Key Specifications, Connector Series 1: SHV, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SHV Plug to BNC Male Right Angle Cable Using LMR-100 Coax. PE3W13062 is a SHV plug to BNC male right angle cable using LMR-100A coax. This Pasternack SHV plug to BNC male right angle cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm BNC for connector 2. SHV to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SHV to male BNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13062 SHV plug to BNC male right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() Relay Specialties | CMR-1306 | Infitec Incorporated | INFITEC DELAY-ON-MAKE TIMER |
| 2 | |
![]() TE Connectivity | 1-1903130-6 | TE Connectivity | DYNAMIC 1200D TAB HSG 12P F/H Number of Positions: 12 Connector & Housing Type: Housing for Male Terminals Connector Product Type: Housing Mating Retention: With Termination Method to Wire & Cable: Crimp Receptacle And Tab Housing: 2.5 Mm Pitch & 250V | 12 Housing for Male Terminals With | Part Number: 1-1903130-6 | Internal Number: 1-1903130-6 | TE Connectivity RoHS : Compliant |
| 30,751 | |
| 5-146130-6 | TE Connectivity | 14 MODII HDR DRST SFMNT B/A LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 14 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 5-146130-6 | Internal Number: 5-146130-6 | TE Connectivity RoHS : Compliant |
| 8,233 | ||
| 130663 | TE Connectivity | PIDG RING NYL Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 16 – 14 AWG Wire Size: 1.04 – 2.62 mm² Wire Size: 2050 – 5180 CMA Stud Size: M5 Closed Ring Tongue Terminal 16 – 14 AWG 1.04 – 2.62 mm² 2050 – 5180 CMA | Ring Terminal | Part Number: 130663 | Internal Number: 130663 | Alias Number: AMPS-0-0130663-0 | TE Connectivity RoHS : Compliant |
| 4,048 | ||
| CONREVSMA013.062 | TE Connectivity | RP-SMA Plug 50 Ohm .062 PCB Edge Mount RF Interface: RP-SMA RF Connector Style: Plug Impedance: 50 Ω RF Connector Coupling Mechanism: Threaded Operating Frequency Range: 12 GHz RP-SMA Plug 50 Ω Threaded | Coax Connector | Part Number: CONREVSMA013.062 | Internal Number: L9000259-01 | TE Connectivity RoHS : Compliant |
| 1,495 | ||
| CONSMA013.062 | TE Connectivity | SMA Plug 50 Ohm .062 PCB Edge Mount RF Interface: SMA RF Connector Style: Plug Impedance: 50 Ω RF Connector Coupling Mechanism: Threaded Operating Frequency Range: 18 GHz SMA Plug 50 Ω Threaded | Coax Connector | Part Number: CONSMA013.062 | Internal Number: L9000275-01 | TE Connectivity RoHS : Compliant |
| 803 | ||
| CONSMA013.062-G | TE Connectivity | SMA Plug 50 Ohm .062 PCB Edge Mount RF Interface: SMA RF Connector Style: Plug Impedance: 50 Ω RF Connector Coupling Mechanism: Threaded Operating Frequency Range: 18 GHz SMA Plug 50 Ω Threaded | Coax Connector | Part Number: CONSMA013.062-G | Internal Number: L9000276-01 | TE Connectivity RoHS : Compliant |
| 494 | ||
| 2377130-6 | TE Connectivity | EP II plug housing, 6P, NON-GWT Number of Positions: 6 Connector & Housing Type: Plug Connector Product Type: Housing Mating Alignment: With Mating Alignment Type: Polarization Standard Rectangular Connector | 6 Plug Housing With | Part Number: 2377130-6 | Internal Number: 2377130-6 | TE Connectivity RoHS : Compliant |
| 158 | ||
| FN3041-30-61-C21-R65 | TE Connectivity | FN3041-30-61-C21-R65 Current Rating: 30 A Input Termination Type: Ring Terminal Output Termination Type: Ring Terminal Wiring Configuration: DELTA (3 wire + ground) Operating Voltage: 530 VAC 3-Phase Filters & Low Leakage Emc Filter For High Reliability Application | 30 A Ring Terminal DELTA (3 wire + ground) | Part Number: FN3041-30-61-C21-R65 | Internal Number: 823542-SF | FN3041-30-61-C21-R65 Current Rating: 30 A Input Termination Type: Ring Terminal Output Termination Type: Ring Terminal Wiring Configuration: DELTA (3 wire + ground) Operating Voltage: 530 VAC 3-Phase Filters & Low Leakage Emc Filter For High Reliability Application | 30 A Ring Terminal DELTA (3 wire + ground) | Part# FN3041-30-61-C21-R65 RoHS : Compliant |
| 16 | ||
![]() Teledyne HiRel | 5962-8871306RA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | ||
| 5962-8871306SA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | |||
| 5962-8871306XA | Teledyne HiRel | PROG. LOGIC DEVICE, 16-INPUT 8-OUTPUT AND-OR-INVERT RoHS : Not Compliant | 0 | |||
![]() Waytek, Inc. | 21306-P5 | FTZ Industries | FTZ Industries 21306-6 extra heavy-duty heat shrink kit refill is red adhesive-lined tubing with a .750" size for rugged cable, splice, and termination protection. Its thick-wall construction supports strong moisture sealing and abrasion resistance, and this refill pack includes 5 pieces for restocking heat-shrink kits. |
| 0 |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |