 |
Datenblatt-Suchmaschine für elektronische Bauteile |
|
|
Datenblatt-Suchmaschine für elektronische Bauteile |
|
1490-RGN Verteiler |
| Verteiler | Teilenummer | Hersteller | Bauteilbeschribung | Price | Qty. BuyNow | |
 NexGen Digital | MC1490P | Motorola Semiconductor Products | RoHS : Not Compliant | 10 | ||
| LT1490ACS8#TRPBF | Analog Devices Inc | RoHS : Compliant | 8 | |||
| LT1490AIMS8#TRPBF | Analog Devices Inc | RoHS : Compliant | 6 | |||
| LT1490AIS8#PBF | Analog Devices Inc | RoHS : Compliant | 6 | |||
 Richardson RFPD | LT1490IS8#TRPBF | Analog Devices Inc | Op Amp Dual Micropower Amplifier R-R I/O ±22V/44V RoHS : Compliant |
| 0 | |
| 20001149-00 | TE Connectivity | Ultra-Small, Gel-Filled, Pressure Sensor RoHS : Compliant | 0 | |||
| SI5395A-A14908-GMR | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 1028MHz-OUT RoHS : Compliant | 0 | |||
| 227-1490/ST=PS | Amphenol Corporation | HDBNC Spanner Nut Tool RoHS : Compliant |
| 0 | ||
| LT1490AHS8#TRPBF | Analog Devices Inc | Op Amp Dual Micropower Amplifier R-R I/O ±22V/44V RoHS : Compliant |
| 0 | ||
| LT1490AIMS8#TRPBF | Analog Devices Inc | Op Amp Dual Micropower Amplifier R-R I/O ±22V/44V RoHS : Compliant |
| 0 | ||
| LT1490IS8#PBF | Analog Devices Inc | Op Amp Dual Micropower Amplifier R-R I/O ±22V/44V RoHS : Compliant |
| 0 | ||
| LT1490AIDD#PBF | Analog Devices Inc | Op Amp Dual Micropower Amplifier R-R I/O ±22V/44V RoHS : Compliant |
| 0 | ||
| 149-0701-601 | Cinch Connectivity Solutions | 1.0mm Female Panel End Launch Jack - 110 GHz RoHS : Compliant |
| 0 | ||
| 2001481490914ZT | Radiall | FD/PD 1,85 TestPro 2 914mm RoHS : Compliant |
| 0 | ||
| 1490-4 | Spectrum Control | RF COAX TERMINATION RoHS : Compliant |
| 0 | ||
| LT1490ACDD#PBF | Analog Devices Inc | Op Amp Dual Micropower Amplifier R-R I/O ±22V/44V RoHS : Compliant |
| 0 | ||
| LT1490AIN8#PBF | Analog Devices Inc | Op Amp Dual Micropower Amplifier R-R I/O ±22V/44V RoHS : Compliant |
| 0 | ||
| 149-0901-811 | Cinch Connectivity Solutions | 1.0mm Male to Female Adapter RoHS : Not Compliant |
| 0 | ||
| LT1490AIDD#TRPBF | Analog Devices Inc | Op Amp Dual Micropower Amplifier R-R I/O ±22V/44V RoHS : Compliant |
| 0 | ||
 EBV Elektronik | TDA21490AUMA1 | Infineon Technologies AG | MOSFET Driver Dual High Side and Low Side 425 V to 16 V 50 ns 39 Pins PQFN (Alt: SP002504078) RoHS : Compliant | 0 | ||
| BX8071514900KF S RN49 | Intel Corporation | (Alt: 99CFZ1) RoHS : Compliant | 0 | |||
| BX8071514900K S RN48 | Intel Corporation | (Alt: 99CFXV) RoHS : Compliant | 0 | |||
| BX8071514900 S RN3V | Intel Corporation | (Alt: 99CG5P) RoHS : Compliant | 0 | |||
 ECCO | 0970149000 | ITT Interconnect Solutions |
| 234 | ||
| 097-0149-000 | ITT Interconnect Solutions |
| 234 | |||
 Maritex | 1-2333149-0 | TE Connectivity | Rectangular Connector Housings; 1-2333149-0; TE CONNECTIVITY; 2; 20; 20; Yes RoHS : Compliant |
| 274 | |
| 5031481490 | Molex | Female Socket Headers; 5031481490; MOLEX; 2; 14; Tin; Yes RoHS : Compliant |
| 60 | ||
 Pasternack Enterprises US | PE3C1490/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. N Male to N Male Right Angle Low Loss Cable Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly N male to N male right angle low loss cable using LMR-240-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable using LMR-240-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C1490/HS can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1490/HS RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C1490/HS is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1490/HS can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 7,236 | ||
| PE3W14905-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Male to BNC Male Low Loss Cable 12 Inch Length Using LMR-LW195 Coax., Radio frequency assembly BNC male to BNC male low loss cable 12 inch length using LMR-LW195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 12 inch length using LMR-LW195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3W14905-12 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14905-12 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3W14905-12 is built with LMR-LW195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 2,742 | ||
| PE3C1490/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to N Male Right Angle Low Loss Cable 36 Inch Length Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly N male to N male right angle low loss cable 36 inch length using LMR-240-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 36 inch length using LMR-240-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C1490/HS-36 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1490/HS-36 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C1490/HS-36 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1490/HS-36 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,675 | ||
| PE3C1490/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Male Right Angle Low Loss Cable 12 Inch Length Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly N male to N male right angle low loss cable 12 inch length using LMR-240-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 12 inch length using LMR-240-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C1490/HS-12 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1490/HS-12 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C1490/HS-12 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1490/HS-12 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,675 | ||
| PE3C1490/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Right Angle Low Loss Cable 60 Inch Length Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly N male to N male right angle low loss cable 60 inch length using LMR-240-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 60 inch length using LMR-240-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C1490/HS-60 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1490/HS-60 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C1490/HS-60 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1490/HS-60 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,675 | ||
| PE3W14905-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. BNC Male to BNC Male Low Loss Cable 24 Inch Length Using LMR-LW195 Coax., Radio frequency assembly BNC male to BNC male low loss cable 24 inch length using LMR-LW195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 24 inch length using LMR-LW195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3W14905-24 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14905-24 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3W14905-24 is built with LMR-LW195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,371 | ||
| PE3W14905-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. BNC Male to BNC Male Low Loss Cable 36 Inch Length Using LMR-LW195 Coax., Radio frequency assembly BNC male to BNC male low loss cable 36 inch length using LMR-LW195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 36 inch length using LMR-LW195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3W14905-36 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14905-36 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3W14905-36 is built with LMR-LW195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 914 | ||
| PE3W14905-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. BNC Male to BNC Male Low Loss Cable 60 Inch Length Using LMR-LW195 Coax., Radio frequency assembly BNC male to BNC male low loss cable 60 inch length using LMR-LW195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 60 inch length using LMR-LW195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3W14905-60 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14905-60 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3W14905-60 is built with LMR-LW195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 548 | ||
| PE3W01490 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm. SMA Female to SMP Female Right Angle Cable Using PE-SR047FL Coax. PE3W01490 is a SMA female to SMP female right angle cable using PE-SR047FL coax. This Pasternack SMA female to SMP female right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMP for connector 2. SMA to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA to female SMP right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W01490 SMA female to SMP female right angle cable assembly is constructed with PE-SR047FL coax. | 0 | |||
| PE3W14906 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. Limited Detent SMP Male 2 Hole Flange to SMP Female Cable Using PE-SR405AL Coax. PE3W14906 is a SMP male 2 hole flange to SMP female cable using PE-SR405AL coax. This Pasternack SMP male 2 hole flange to SMP female cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMP for connector 2. Our male SMP 2 hole flange to female SMP cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W14906 SMP male 2 hole flange to SMP female cable assembly is constructed with PE-SR405AL coax. | 0 | |||
| PE3W14904/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. 1.85mm Male to SMP Female Cable Using PE-P086HF Coax with HeatShrink. PE3W14904/HS is a 1.85mm male to SMP female cable using PE-P086HF coax. This Pasternack 1.85mm male to SMP female cable assembly uses a 50 Ohm 1.85mm for connector 1 and a 50 Ohm SMP for connector 2. Our male 1.85mm to female SMP cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14904/HS 1.85mm male to SMP female cable assembly is constructed with PE-P086HF coax. | 0 | |||
| PE3W14902/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SSMA Female Bulkhead to Black FAKRA Jack Cable Using RG174 Coax with HeatShrink. PE3W14902/HS is a SSMA female bulkhead to FAKRA jack cable using RG174 coax. This Pasternack SSMA female bulkhead to FAKRA jack cable assembly uses a 50 Ohm SSMA for connector 1 and a 50 Ohm FAKRA for connector 2. Our female SSMA bulkhead to jack FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14902/HS SSMA female bulkhead to FAKRA jack cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W11490 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. N Male to SMA Male Cable Using PE-P195 Coax. PE3W11490 is a N male to SMA male cable using PE-P195 coax. This Pasternack N male to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our male N to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11490 N male to SMA male cable assembly is constructed with PE-P195 coax. | 0 | |||
| PE3W21490 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P047HF, RF Cable Type: PE-P047HF, RF Cable Impedance: 50 Ohm. 2.92mm Female to 2.92mm Female Cable Using PE-P047HF Coax. PE3W21490 is a 2.92mm female to 2.92mm female cable using PE-P047HF coax. This Pasternack 2.92mm female to 2.92mm female cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm 2.92mm for connector 2. Our female 2.92mm to female 2.92mm cable assembly uses a high flex cable type that is 50 Ohm. Pasternack PE3W21490 2.92mm female to 2.92mm female cable assembly is constructed with PE-P047HF coax. | 0 | |||
| PE3W14907LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm. N Female Bulkhead to TNC Male Cable Using LMR-LW195 Coax with HeatShrink, LF Solder. PE3W14907LF/HS is a N female bulkhead to TNC male cable using LMR-LW195 coax. This Pasternack N female bulkhead to TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our female N bulkhead to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14907LF/HS N female bulkhead to TNC male cable assembly is constructed with LMR-LW195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
 TE Connectivity | 2149027-1 | TE Connectivity | MiniSAS HD 1x1 Rec Assy Pluggable Form Factor: Mini-SAS HD Pluggable I/O Product Type: Cage Centerline (Pitch): .03 mm Centerline (Pitch): .75 in Circuit Application: Signal Mini-SAS HD Cage .03 mm .75" | High Speed I/o | Part Number: 2149027-1 | Internal Number: 2149027-1 | TE Connectivity RoHS : Compliant |
| 447 | |
| 2-221149-0 | TE Connectivity | CONTACT,JACK,COML BNC,GOLD PL RF Contact Style: Coax Contact Type: Socket Contact Orientation: Horizontal Contact Mating Area Plating Material: Gold (Au) Coax Socket Horizontal Gold (Au) | Rf Contact | Part Number: 2-221149-0 | Internal Number: 2-221149-0 | TE Connectivity RoHS : Compliant |
| 191 | ||
| 5414907-1 | TE Connectivity | JACK,PCB,75 OHM,NC RF Interface: BNC RF Connector Style: Jack RF Connector Mated Outer Diameter (Approximate): .572 in RF Connector Mated Outer Diameter (Approximate): 14.53 mm Impedance: 75 Ω BNC Jack .572" 14.53 mm | Coax Connector | Part Number: 5414907-1 | Internal Number: 5414907-1 | TE Connectivity RoHS : Compliant |
| 154 | ||
| T1490100125-000 | TE Connectivity | H10B-SDRH-BO-M25 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Base Housing Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1490100125-000 | Internal Number: T1490100125-000 | TE Connectivity RoHS : Compliant |
| 14 | ||
| T1490100221-000 | TE Connectivity | H10B-SDRH-BO-2PG21 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Hood & Base Locking Device Type: Locking Sealable: Yes Base Housing Side Locking | Rectangular Connector Hoods & Base | Part Number: T1490100221-000 | Internal Number: T1490100221-000 | TE Connectivity RoHS : Compliant |
| 7 | ||
| T1490240232-000 | TE Connectivity | H24B-SDRH-BO-2M32 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Hood & Base Locking Device Type: Locking Sealable: Yes Base Housing Side Locking | Rectangular Connector Hoods & Base | Part Number: T1490240232-000 | Internal Number: T1490240232-000 | TE Connectivity RoHS : Compliant |
| 6 | ||
| T1490160129-000 | TE Connectivity | H16B-SDRH-BO-PG29 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Hood & Base Locking Device Type: Locking Sealable: Yes Base Housing Side Locking | Rectangular Connector Hoods & Base | Part Number: T1490160129-000 | Internal Number: T1490160129-000 | TE Connectivity RoHS : Compliant |
| 6 | ||
| 1490414-2 | TE Connectivity | HYP10 SOLIS HD 6-4AWG INDENTER Tool Grade: Premium Crimp Tooling Die Sets Type: Removable/Interchangeable Specification Type: TE Product Specification (114-) TE Certification: Cannot be Certified Power Technology Type: Manual Hydraulic Battery Premium Crimp Tooling Removable/Interchangeable Cannot be Certified | Hand Crimping Tool | Part Number: 1490414-2 | Internal Number: 1490414-2 | TE Connectivity RoHS : Compliant |
| 4 | ||
| T1490240129-000 | TE Connectivity | H24B-SDRH-BO-PG29 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Hood & Base Locking Device Type: Locking Sealable: Yes Base Housing Side Locking | Rectangular Connector Hoods & Base | Part Number: T1490240129-000 | Internal Number: T1490240129-000 | TE Connectivity RoHS : Compliant |
| 4 | ||
| 1490414-3 | TE Connectivity | HYP10 SOLIS HD 1/0AWG INDENTER Tool Grade: Premium Crimp Tooling Die Sets Type: Removable/Interchangeable Specification Type: TE Product Specification (114-) TE Certification: Cannot be Certified Power Technology Type: Hydraulic Manual Battery Premium Crimp Tooling Removable/Interchangeable Cannot be Certified | Hand Crimping Tool | Part Number: 1490414-3 | Internal Number: 1490414-3 | TE Connectivity RoHS : Compliant |
| 3 | ||
| 1490700-1 | TE Connectivity | HYP10 TERMINYL 1/0AWG DIE SET Tool Grade: Premium Crimp Tooling Die Sets Type: Removable/Interchangeable Specification Type: TE Product Specification (114-) TE Certification: Yes – Certificate Included Power Technology Type: Hydraulic Manual Battery Premium Crimp Tooling Removable/Interchangeable – Certificate Included | Hand Crimping Tool | Part Number: 1490700-1 | Internal Number: 1490700-1 | TE Connectivity RoHS : Compliant |
| 3 | ||
| 1490413-6 | TE Connectivity | HYP10 SOLIS 2/0AWG NEST Tool Grade: Premium Crimp Tooling Die Sets Type: Removable/Interchangeable Specification Type: TE Product Specification (114-) TE Certification: Cannot be Certified Power Technology Type: Manual Hydraulic Battery Premium Crimp Tooling Removable/Interchangeable Cannot be Certified | Hand Crimping Tool | Part Number: 1490413-6 | Internal Number: 1490413-6 | TE Connectivity RoHS : Compliant |
| 2 | ||
| T1490160221-000 | TE Connectivity | H16B-SDRH-BO-2PG21 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Hood & Base Locking Device Type: Locking Sealable: Yes Base Housing Side Locking | Rectangular Connector Hoods & Base | Part Number: T1490160221-000 | Internal Number: T1490160221-000 | TE Connectivity RoHS : Compliant |
| 2 | ||
| 1490413-3 | TE Connectivity | HYP10 SOLIS HD 1/0-4/0 AWG INDENTER Tool Grade: Premium Crimp Tooling Die Sets Type: Removable/Interchangeable Specification Type: TE Product Specification (114-) TE Certification: Cannot be Certified Power Technology Type: Hydraulic Battery Manual Premium Crimp Tooling Removable/Interchangeable Cannot be Certified | Hand Crimping Tool | Part Number: 1490413-3 | Internal Number: 1490413-3 | Alias Number: EP8473-000 | TE Connectivity RoHS : Compliant |
| 1 | ||
 Teledyne HiRel | 5962-9314901MRA | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | ||
5962-9314901M2A | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-9314901QSA | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
5962-9314901MSA | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-9314901QRA | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-9314901Q2A | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
 Venkel Ltd. | UPTF1206-8W-P-1490BT-1K | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;5PPM;149R;�0.1% RoHS : Compliant | 0 | ||
| UPTF1206-8W-P-1490UT | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;5PPM;149R;�0.01% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-1490CT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;149R;�0.25% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-1490DT | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;149R;�0.5% RoHS : Compliant | 0 | |||
| TFCR0603-10W-E-1490FT-1K | VENKEL LTD | Thin Film CR;0603;1/10W;�25PPM;149R;�1% RoHS : Compliant | 0 | |||
| TFCR0603-16W-K-1490BT-1K | VENKEL LTD | Thin Film CR;0603;1/16W;�100PPM;149R;�0.1% RoHS : Compliant | 0 | |||
| TFCR2512-2W-K-1490CT | VENKEL LTD | Thin Film CR;2512;1/2W;�100PPM;149R;�0.25% RoHS : Compliant | 0 | |||
| TFCR2512-2W-K-1490DT-1K | VENKEL LTD | Thin Film CR;2512;1/2W;�100PPM;149R;�0.5% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-1490CT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;149R;�0.25% RoHS : Compliant | 0 | |||
| UPTF0603-16W-N-1490UT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�10PPM;149R;�0.01% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-1490CT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;149R;�0.25% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-1490DT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;149R;�0.5% RoHS : Compliant | 0 | |||
| UPTF2010-2W-N-1490CT | VENKEL LTD | Ultra Precision Thin Film CR;2010;1/2W;�10PPM;149R;�0.25% RoHS : Compliant | 0 | |||
| TFCR0603-16W-K-1490DT-1K | VENKEL LTD | Thin Film CR;0603;1/16W;�100PPM;149R;�0.5% RoHS : Compliant | 0 | |||
| TFCR0805-8W-E-1490CT-1K | VENKEL LTD | Thin Film CR;0805;1/8W;�25PPM;149R;�0.25% RoHS : Compliant | 0 | |||
 Vyrian | LT1490IS8#TRPBF | Analog Devices Inc | Operational Amplifier, 2 Func, 1500uV Offset-Max, BIPolar, PDSO8 RoHS : Compliant | 11,486 | ||
| LT1490AIN8#TRPBF | Analog Devices Inc | Operational Amplifier, 2 Func, 1100uV Offset-Max, BIPolar, PDIP8 RoHS : Compliant | 11,277 | |||
| MAX14900EAGM-CKT | Analog Devices (Maxim Integrated) | 11,034 | ||||
AT49BV1614-90TI | Atmel Corporation | Flash, 1MX16, 90ns, PDSO48 RoHS : Not Compliant | 9,793 | |||
| MAX14900EAGM-TCKH | Analog Devices (Maxim Integrated) | 9,346 | ||||
| LT1490ACMS8-TRPBF | Analog Devices Inc | 8,687 | ||||
| LT1490IS8-TRPBF | Analog Devices Inc | 8,464 | ||||
| MAX1490AEPI | Analog Devices Inc | Line Driver/Receiver, 1 Driver, PDIP24 RoHS : Not Compliant | 7,709 | |||
| CT149026 | Micron Technology, Inc | 6,634 | ||||
| CT149008 | Micron Technology, Inc | 6,206 | ||||
| MAX14908ETK+ | Analog Devices Inc | Analog Circuit, 1 Func, 12 Channel, BICMOS RoHS : Compliant | 6,066 | |||
| LT1490AHMS8 | Analog Devices Inc | Operational Amplifier, 2 Func, 3200uV Offset-Max, BIPolar, PDSO8 RoHS : Not Compliant | 5,443 | |||
| CT149007 | Micron Technology, Inc | 4,898 | ||||
| 114903 | Micron Technology, Inc | 2,707 | ||||
| 114902 | Micron Technology, Inc | 2,437 | ||||
 Waytek, Inc. | 7158-3114-90 | Yazaki Corp | Yazaki 2.8 Blue Cavity Plug |
| 21,103 | |
| 149045-91W | General Cable Technologies Corporation | 12GA SXL White Cross-Link Automotive Wire XLPE -51C to 125C |
| 4,750 | ||
 Win Source Electronics | TDA21490AUMA1 | Infineon Technologies AG | IFX POWERSTAGE/DRIVER RoHS : Compliant |
| 27,390 | |
LT1490ACMS8 | Linear Technology | Dual Over-The-Top Micropower Rail-to-Rail Input and Output Op Amp RoHS : Not Compliant |
| 4,282 | ||
| LT1490ACMS8#PBF | Linear Technology | IC OPAMP GP 200KHZ RRO 8MSOP RoHS : Compliant |
| 3,920 | ||
MAX1490BEPG | Maxim Integrated Products | IC TRANSCEIVER FULL 1/1 24DIP RoHS : Not Compliant |
| 2,880 | ||
| LT1490ACMS8#TRPBF | Linear Technology | IC OPAMP GP 200KHZ RRO 8MSOP RoHS : Compliant |
| 2,500 | ||
| LT1490ACS8 | Linear Technology | Dual Over-The-Top Micropower Rail-to-Rail Input and Output Op Amp RoHS : Not Compliant |
| 2,500 | ||
| MAX1490AEPG+ | Maxim Integrated Products | IC RS485/RS422 DATA INTRFC 24DIP RoHS : Compliant |
| 2,044 | ||
LT1490AIDD | Linear Technology | Dual/Quad Over-The-Top Micropower Rail-to-Rail Input and Output Op Amps RoHS : Not Compliant |
| 1,504 | ||
| LT1490AIDD#PBF | Linear Technology | IC OPAMP GP 200KHZ RRO 8DFN RoHS : Compliant |
| 1,400 | ||
| LT1490AIDD#TRPBF | Linear Technology | Op Amp Dual Micropower Amplifier R-R I/O ±22V/44V Automotive 8-Pin DFN EP T/R / IC OPAMP GP 200KHZ RRO 8DFN RoHS : Compliant |
| 1,400 | ||
| LT1490IS8 | Analog Devices Inc | IC OP-AMP R-R IN/OUT DUAL 8-SOIC RoHS : Not Compliant |
| 1,046 | ||
| LT1490IS8#PBF | Linear Technology | IC OPAMP GP 200KHZ RRO 8SO RoHS : Compliant |
| 980 | ||
| LT1490IS8#TRPBF | Linear Technology | IC OPAMP GP 200KHZ RRO 8SO RoHS : Compliant |
| 970 | ||
| LT1490CMS8#TR | Linear Technology | RoHS : Not Compliant |
| 500 | ||
| LT1490CMS8#PBF | Linear Technology | IC OPAMP GP 200KHZ RRO 8MSOP RoHS : Compliant |
| 490 |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
German ▼ 
English
Chinese
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand