1545-R3B Price, Verteiler, Stock

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Plug to SMA Female Cable Using PE-SR405FL Coax with HeatShrink., Radio frequency assembly reverse polarity SMA plug to SMA female cable using PE-SR405FL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The reverse polarity SMA plug to SMA female cable using PE-SR405FL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a reverse polarity SMA cable connection on one end and a SMA cable connection on the other. Our reverse polarity SMA to SMA cable assembly has a plug gender on end 1 and a female on end 2. PE3W15458/HS can also be known as a reverse polarity SMA male to SMA jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has an in-series connection. Our SMA plug to SMA female cable has a maximum VSWR of 1.4:1. Reverse polarity SMA male to SMA jack cable assembly PE3W15458/HS is built with PE-SR405FL which is a formable coax type. The Pasternack formable reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a stainless steel body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W15458/HS can also be used in the other direction and will be a SMA female to reverse polarity SMA plug cable assembly if the opposite connectivity is required. SMA reverse polarity male to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.

350

PE3C1545

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMA Female 4 Hole Flange to Straight Cut Lead Test Probe Cable Using PE-SR405FL Coax., Radio frequency assembly SMA female 4 hole flange to straight cut lead test probe cable using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 4 hole flange to straight cut lead test probe cable using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax test probe cable assembly is built with SMA 4 hole flange cable connection on one end and straight cut lead cable connection on the other. Our test probe SMA to straight cut lead cable assemblies have a female gender on end 1 and sexless on end 2. This SMA to straight cut lead cable is a female to sexless coax assembly, PE3C1545, can also be known as a test probe SMA jack to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. SMA jack to straight cut lead sexless cable assembly PE3C1545 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to straight cut lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 4 hole flange to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1545 can also be used in the other direction and will be straight cut lead sexless to SMA female 4 hole flange cable assembly if the opposite connectivity is required. Test probe SMA jack 4 hole flange to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to straight cut lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 4 hole flange to straight cut lead test probe cable using PE-SR405FL coax.

196

PE3W15458/HS-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. Reverse Polarity SMA Plug to SMA Female Cable 6 Inch Length Using PE-SR405FL Coax with HeatShrink., Radio frequency assembly reverse polarity SMA plug to SMA female cable 6 inch length using PE-SR405FL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The reverse polarity SMA plug to SMA female cable 6 inch length using PE-SR405FL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a reverse polarity SMA cable connection on one end and a SMA cable connection on the other. Our reverse polarity SMA to SMA cable assembly has a plug gender on end 1 and a female on end 2. PE3W15458/HS-6 can also be known as a reverse polarity SMA male to SMA jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has an in-series connection. Our SMA plug to SMA female cable has a maximum VSWR of 1.4:1. Reverse polarity SMA male to SMA jack cable assembly PE3W15458/HS-6 is built with PE-SR405FL which is a formable coax type. The Pasternack formable reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a stainless steel body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W15458/HS-6 can also be used in the other direction and will be a SMA female to reverse polarity SMA plug cable assembly if the opposite connectivity is required. SMA reverse polarity male to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.

1 : $105.99
25 : $100.69
50 : $95.39
100 : $91.15

PE3W15458/HS-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Reverse Polarity SMA Plug to SMA Female Cable 36 Inch Length Using PE-SR405FL Coax with HeatShrink., Radio frequency assembly reverse polarity SMA plug to SMA female cable 36 inch length using PE-SR405FL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The reverse polarity SMA plug to SMA female cable 36 inch length using PE-SR405FL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a reverse polarity SMA cable connection on one end and a SMA cable connection on the other. Our reverse polarity SMA to SMA cable assembly has a plug gender on end 1 and a female on end 2. PE3W15458/HS-36 can also be known as a reverse polarity SMA male to SMA jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has an in-series connection. Our SMA plug to SMA female cable has a maximum VSWR of 1.4:1. Reverse polarity SMA male to SMA jack cable assembly PE3W15458/HS-36 is built with PE-SR405FL which is a formable coax type. The Pasternack formable reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a stainless steel body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W15458/HS-36 can also be used in the other direction and will be a SMA female to reverse polarity SMA plug cable assembly if the opposite connectivity is required. SMA reverse polarity male to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.

1 : $156.99
25 : $149.14
50 : $141.29
100 : $135.01

PE3W15458/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Reverse Polarity SMA Plug to SMA Female Cable 12 Inch Length Using PE-SR405FL Coax with HeatShrink., Radio frequency assembly reverse polarity SMA plug to SMA female cable 12 inch length using PE-SR405FL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The reverse polarity SMA plug to SMA female cable 12 inch length using PE-SR405FL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a reverse polarity SMA cable connection on one end and a SMA cable connection on the other. Our reverse polarity SMA to SMA cable assembly has a plug gender on end 1 and a female on end 2. PE3W15458/HS-12 can also be known as a reverse polarity SMA male to SMA jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has an in-series connection. Our SMA plug to SMA female cable has a maximum VSWR of 1.4:1. Reverse polarity SMA male to SMA jack cable assembly PE3W15458/HS-12 is built with PE-SR405FL which is a formable coax type. The Pasternack formable reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a stainless steel body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W15458/HS-12 can also be used in the other direction and will be a SMA female to reverse polarity SMA plug cable assembly if the opposite connectivity is required. SMA reverse polarity male to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.

1 : $115.99
25 : $110.19
50 : $104.39
100 : $99.75

PE3W15458/HS-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Reverse Polarity SMA Plug to SMA Female Cable 24 Inch Length Using PE-SR405FL Coax with HeatShrink., Radio frequency assembly reverse polarity SMA plug to SMA female cable 24 inch length using PE-SR405FL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The reverse polarity SMA plug to SMA female cable 24 inch length using PE-SR405FL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a reverse polarity SMA cable connection on one end and a SMA cable connection on the other. Our reverse polarity SMA to SMA cable assembly has a plug gender on end 1 and a female on end 2. PE3W15458/HS-24 can also be known as a reverse polarity SMA male to SMA jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has an in-series connection. Our SMA plug to SMA female cable has a maximum VSWR of 1.4:1. Reverse polarity SMA male to SMA jack cable assembly PE3W15458/HS-24 is built with PE-SR405FL which is a formable coax type. The Pasternack formable reverse polarity SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a stainless steel body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W15458/HS-24 can also be used in the other direction and will be a SMA female to reverse polarity SMA plug cable assembly if the opposite connectivity is required. SMA reverse polarity male to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.

1 : $136.99
25 : $130.14
50 : $123.29
100 : $117.81

PE3C1545-3

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 3 inches. SMA Female 4 Hole Flange to Straight Cut Lead Test Probe Cable 3 Inch Length Using PE-SR405FL Coax., Radio frequency assembly SMA female 4 hole flange to straight cut lead test probe cable 3 inch length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 4 hole flange to straight cut lead test probe cable 3 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax test probe cable assembly is built with SMA 4 hole flange cable connection on one end and straight cut lead cable connection on the other. Our test probe SMA to straight cut lead cable assemblies have a female gender on end 1 and sexless on end 2. This SMA to straight cut lead cable is a female to sexless coax assembly, PE3C1545-3, can also be known as a test probe SMA jack to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. SMA jack to straight cut lead sexless cable assembly PE3C1545-3 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to straight cut lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 4 hole flange to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1545-3 can also be used in the other direction and will be straight cut lead sexless to SMA female 4 hole flange cable assembly if the opposite connectivity is required. Test probe SMA jack 4 hole flange to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to straight cut lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 4 hole flange to straight cut lead test probe cable 3 inch length using PE-SR405FL coax.

1 : $100.99
25 : $95.94
50 : $90.89
100 : $86.85

PE3C1545-6

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Female 4 Hole Flange to Straight Cut Lead Test Probe Cable 6 Inch Length Using PE-SR405FL Coax., Radio frequency assembly SMA female 4 hole flange to straight cut lead test probe cable 6 inch length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 4 hole flange to straight cut lead test probe cable 6 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax test probe cable assembly is built with SMA 4 hole flange cable connection on one end and straight cut lead cable connection on the other. Our test probe SMA to straight cut lead cable assemblies have a female gender on end 1 and sexless on end 2. This SMA to straight cut lead cable is a female to sexless coax assembly, PE3C1545-6, can also be known as a test probe SMA jack to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. SMA jack to straight cut lead sexless cable assembly PE3C1545-6 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to straight cut lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 4 hole flange to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1545-6 can also be used in the other direction and will be straight cut lead sexless to SMA female 4 hole flange cable assembly if the opposite connectivity is required. Test probe SMA jack 4 hole flange to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to straight cut lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 4 hole flange to straight cut lead test probe cable 6 inch length using PE-SR405FL coax.

1 : $97.39
25 : $92.52
50 : $87.65
100 : $83.76

PE3C1545-9

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 9 inches. SMA Female 4 Hole Flange to Straight Cut Lead Test Probe Cable 9 Inch Length Using PE-SR405FL Coax., Radio frequency assembly SMA female 4 hole flange to straight cut lead test probe cable 9 inch length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 4 hole flange to straight cut lead test probe cable 9 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax test probe cable assembly is built with SMA 4 hole flange cable connection on one end and straight cut lead cable connection on the other. Our test probe SMA to straight cut lead cable assemblies have a female gender on end 1 and sexless on end 2. This SMA to straight cut lead cable is a female to sexless coax assembly, PE3C1545-9, can also be known as a test probe SMA jack to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. SMA jack to straight cut lead sexless cable assembly PE3C1545-9 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to straight cut lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 4 hole flange to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1545-9 can also be used in the other direction and will be straight cut lead sexless to SMA female 4 hole flange cable assembly if the opposite connectivity is required. Test probe SMA jack 4 hole flange to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to straight cut lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 4 hole flange to straight cut lead test probe cable 9 inch length using PE-SR405FL coax.

1 : $97.39
25 : $92.52
50 : $87.65
100 : $83.76

PE3W15457

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. MCX Plug to SMB Jack Cable Using LMR-100 Coax. PE3W15457 is a MCX plug to SMB jack cable using LMR-100A coax. This Pasternack MCX plug to SMB jack cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm SMB for connector 2. Our plug MCX to jack SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15457 MCX plug to SMB jack cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C11545/HS2

Pasternack Enterprises

PE3W01545

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using PE-SR402FL Coax., Radio frequency assembly N male to N male cable using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N male cable using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W01545 can also be known as a type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.57-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W01545 is built with PE-SR402FL which is a formable coax type. The Pasternack formable type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. Type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N RF cable assembly as per your requirements.

PE3W15450

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMA Female to SMP Female Right Angle Cable Using RG178 Coax. PE3W15450 is a SMA female to SMP female right angle cable using RG178 coax. This Pasternack SMA female to SMP female right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMP for connector 2. SMA to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA to female SMP right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15450 SMA female to SMP female right angle cable assembly is constructed with RG178 coax.

PE3W21545

Pasternack Enterprises

Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. 1.0/2.3 Male Right Angle to TNC Male Cable Using RG58 Coax. PE3W21545 is a 1.0/2.3 male right angle to TNC male cable using RG58 coax. This Pasternack 1.0/2.3 male right angle to TNC male cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm TNC for connector 2. 1.0/2.3 right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 1.0/2.3 right angle to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21545 1.0/2.3 male right angle to TNC male cable assembly is constructed with RG58 coax.

PE3W15451

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to SMB Jack Bulkhead Cable Using RG58 Coax. PE3W15451 is a BNC male right angle to SMB jack bulkhead cable using RG58 coax. This Pasternack BNC male right angle to SMB jack bulkhead cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMB for connector 2. BNC right angle to SMB coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to jack SMB bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15451 BNC male right angle to SMB jack bulkhead cable assembly is constructed with RG58 coax.

TE Connectivity

2-881545-2

TE Connectivity

AMP SHUNT LOW PROFI Shunt Type: Novo Shunt Style: Open Top Number of Positions: 2 Centerline (Pitch): .1 in Centerline (Pitch): 2.54 mm Novo Open Top 2 .1" | .1" | TE Connectivity
RoHS : Compliant

25,000 : $0.37
10,000 : $0.38
5,000 : $0.39
2,500 : $0.4
1,000 : $0.4
500 : $0.41
250 : $0.42
100 : $0.43
50 : $0.43
25 : $0.44
10 : $0.45
1 : $0.46

83,761

881545-2

TE Connectivity

SHUNT LP W/HANDLE 2 POS 30AU Shunt Type: Novo Shunt Style: Open Top Number of Positions: 2 Centerline (Pitch): .1 in Centerline (Pitch): 2.54 mm Novo Open Top 2 .1" | .1" | TE Connectivity
RoHS : Compliant

25,000 : $0.51
10,000 : $0.52
5,000 : $0.53
2,500 : $0.54
1,000 : $0.55
500 : $0.56
250 : $0.58
100 : $0.59
50 : $0.6
25 : $0.61
10 : $0.62
1 : $0.63

49,816

881545-1

TE Connectivity

SHUNT LP W/HANDLE 2POS 15AU Shunt Type: Novo Shunt Style: Open Top Number of Positions: 2 Centerline (Pitch): .1 in Centerline (Pitch): 2.54 mm Novo Open Top 2 .1" | .1" | TE Connectivity
RoHS : Compliant

25,000 : $0.43
10,000 : $0.44
5,000 : $0.44
2,500 : $0.45
1,000 : $0.46
500 : $0.47
250 : $0.48
100 : $0.49
50 : $0.5
25 : $0.51
10 : $0.51
1 : $0.52

46,933

1-881545-1

TE Connectivity

AMP SHUNT ASS'Y Shunt Type: Novo Shunt Style: Open Top Number of Positions: 2 Centerline (Pitch): .1 in Centerline (Pitch): 2.54 mm Novo Open Top 2 .1" | .1" | TE Connectivity
RoHS : Compliant

25,000 : $0.47
10,000 : $0.48
5,000 : $0.49
2,500 : $0.5
1,000 : $0.51
500 : $0.52
250 : $0.53
100 : $0.54
50 : $0.55
25 : $0.56
10 : $0.57
1 : $0.58

26,943

881545-5

TE Connectivity

AMP SHUNT ASS'Y Shunt Type: Novo Shunt Style: Open Top Number of Positions: 2 Centerline (Pitch): .1 in Centerline (Pitch): 2.54 mm Novo Open Top 2 .1" | .1" | TE Connectivity
RoHS : Compliant

10,000 : $0.62
5,000 : $0.63
2,500 : $0.65
1,000 : $0.66
500 : $0.67
250 : $0.69
100 : $0.7
50 : $0.71
25 : $0.73
10 : $0.74
1 : $0.76

14,048

4-881545-2

TE Connectivity

AMP SHUNT ASS'Y Shunt Type: Novo Shunt Style: Open Top Number of Positions: 2 Centerline (Pitch): .1 in Centerline (Pitch): 2.54 mm Novo Open Top 2 .1" | .1" | TE Connectivity
RoHS : Compliant

25,000 : $0.48
10,000 : $0.49
5,000 : $0.5
2,500 : $0.51
1,000 : $0.52
500 : $0.53
250 : $0.54
100 : $0.55
50 : $0.56
25 : $0.57
10 : $0.58
1 : $0.59

13,350

1-881545-2

TE Connectivity

AMP SHUNT ASS'Y Shunt Type: Novo Shunt Style: Open Top Number of Positions: 2 Centerline (Pitch): .1 in Centerline (Pitch): 2.54 mm Novo Open Top 2 .1" | .1" | TE Connectivity
RoHS : Compliant

25,000 : $0.67
10,000 : $0.68
5,000 : $0.7
2,500 : $0.71
1,000 : $0.73
500 : $0.74
250 : $0.75
100 : $0.77
50 : $0.78
25 : $0.79
10 : $0.81
1 : $0.82

5,325

2441545-1

TE Connectivity

SMA F ST FOR PCB, 2 HOLES FLANGE RFSC RF Interface: SMA RF Connector Style: Jack Impedance: 50 Ω RF Connector Coupling Mechanism: Screw Operating Frequency Range: 27 GHz SMA Jack 50 Ω Screw | TE Connectivity
RoHS : Compliant

1,000 : $17.83
50 : $18.67
1 : $18.74

994

5102154-5

TE Connectivity

A/L UNIV HDR 24P VERT Connector System: Wire-to-Board Number of Positions: 24 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: With Wire-to-Board 24 2.54 mm .1" | Ampseal Header | TE Connectivity
RoHS : Compliant

1,000 : $2.52
500 : $2.59
250 : $2.67
100 : $2.76
50 : $2.84
1 : $3.12

176

Teledyne HiRel

5962-9154501MQA

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR, 35 NS ACCESS TIME
RoHS : Not Compliant

5962-9154506MQA

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR
RoHS : Not Compliant

5962-9154507MYA

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR
RoHS : Not Compliant

5962-9154505MXA

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR
RoHS : Not Compliant

5962-9154506MYA

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR
RoHS : Not Compliant

5962-9154501MYA

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR, 35 NS ACCESS TIME
RoHS : Not Compliant

5962-9154502MQA

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR, 25 NS ACCESS TIME
RoHS : Not Compliant

5962-9154504MXA

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR
RoHS : Not Compliant

5962-9154503MQA

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR, 35 NS ACCESS TIME
RoHS : Not Compliant

5962-9154502MXA

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR, 25 NS ACCESS TIME
RoHS : Not Compliant

5962-9154505MYA

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR
RoHS : Not Compliant

5962-9154501MXA

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR, 35 NS ACCESS TIME
RoHS : Not Compliant

5962-9154506MXA

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR
RoHS : Not Compliant

5962-9154504MYA

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR
RoHS : Not Compliant

5962-9154502MYA

Teledyne HiRel

LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR, 25 NS ACCESS TIME
RoHS : Not Compliant

Venkel Ltd.

CR1206-8W-1545FT

VENKEL LTD

Chip Resistor;1206;1/8W;15.4M;�1%
RoHS : Compliant

CR0805-10W-1545FT

VENKEL LTD

Chip Resistor;0805;1/10W;15.4M;�1%
RoHS : Compliant

PWCR2512-ZK-1545DT

VENKEL LTD

Pulse Withstanding CR;2512;1.5W;�100PPM;15.4M;�0.5%
RoHS : Compliant

PWCR1206-UK-1545FT

VENKEL LTD

Pulse Withstanding CR;1206;1/3W;�100PPM;15.4M;�1%
RoHS : Compliant

CR0603-16W-1545FT

VENKEL LTD

Chip Resistor;0603;1/16W;15.4M;�1%
RoHS : Compliant

PWCR2010-WK-1545FT

VENKEL LTD

Pulse Withstanding CR;2010;3/4W;�100PPM;15.4M;�1%
RoHS : Compliant

PWCR0805-RK-1545FT

VENKEL LTD

Pulse Withstanding CR;0805;1/8W;�100PPM;15.4M;�1%
RoHS : Compliant

SVM1545LB-UVL

VENKEL LTD

Rectifier;TO-277;45V;15A
RoHS : Not Compliant

CR0603-10W-1545FT

VENKEL LTD

Chip Resistor;0603;1/10W;15.4M;�1%
RoHS : Compliant

PWCR1206-UK-1545DT

VENKEL LTD

Pulse Withstanding CR;1206;1/3W;�100PPM;15.4M;�0.5%
RoHS : Compliant

PWCR1210-VK-1545DT

VENKEL LTD

Pulse Withstanding CR;1210;1/2W;�100PPM;15.4M;�0.5%
RoHS : Compliant

CR0402-16W-1545FT

VENKEL LTD

Chip Resistor;0402;1/16W;15.4M;�1%
RoHS : Compliant

CR2010-2W-1545FT

VENKEL LTD

Chip Resistor;2010;1/2W;15.4M;�1%
RoHS : Compliant

PWCR2010-WK-1545DT

VENKEL LTD

Pulse Withstanding CR;2010;3/4W;�100PPM;15.4M;�0.5%
RoHS : Compliant

CR2512-1W-1545FT

VENKEL LTD

Chip Resistor;2512;1W;15.4M;�1%
RoHS : Compliant

Vyrian

VS-MBR1545CT-1-M3

Vishay Intertechnologies

Rectifier Diode, Schottky, 1 Phase, 2 Element, 7.5A, 45V V(RRM), Silicon, TO-262AA
RoHS : Compliant

18,427

SK1545-TP

Micro Commercial Components

Rectifier Diode, Schottky, 1 Phase, 1 Element, 15A, 45V V(RRM), Silicon, DO-214AB
RoHS : Compliant

14,558

MBRB1545CTHE3_B/P

Vishay Intertechnologies

Rectifier Diode, Schottky, 1 Phase, 2 Element, 7.5A, 45V V(RRM), Silicon, TO-263AB
RoHS : Compliant

14,220

SBRB1545CTG

onsemi

Rectifier Diode, Schottky, 1 Phase, 2 Element, 7.5A, 45V V(RRM), Silicon
RoHS : Compliant

12,660

DC1545A-A

Analog Devices Inc

10,155

MC1545J

Texas Instruments

Video Amplifier, Bipolar, CDIP14
RoHS : Not Compliant

9,218

ADM6315-45D2ARTZR7

Analog Devices Inc

Power Supply Support Circuit, Fixed, 1 Channel, +4.5V, PDSO4
RoHS : Compliant

9,187

MC1545W/883B

Texas Instruments

Video Amplifier, Bipolar, CDFP14

8,795

LTC1545IG-TRPBF

Analog Devices Inc

6,967

LTC1545IG#PBF

Analog Devices Inc

Line Transceiver, 5 Func, 5 Driver, 5 Rcvr, PDSO36
RoHS : Compliant

5,881

NTS1545MFST3G

onsemi

Rectifier Diode, Schottky, 1 Phase, 1 Element, 15A, 45V V(RRM), Silicon
RoHS : Compliant

4,916

4-881545-1

TE Connectivity

Board Connector, 2 Contact(s), 1 Row(s), Female, Straight
RoHS : Compliant

4,486

NRVTS1545EMFST3G

onsemi

Rectifier Diode, Schottky, 1 Phase, 1 Element, 15A, 45V V(RRM), Silicon
RoHS : Compliant

4,281

1881545

Phoenix Contact

Strip Terminal Block, 4A, 1 Row(s), 1 Deck(s)
RoHS : Compliant

3,543

MAX1545ETL-T

Maxim Integrated Products

Switching Controller, Current-mode, 550kHz Switching Freq-Max, BICMOS
RoHS : Not Compliant

1,103

Win Source Electronics

STPS1545CG-TR

STMicroelectronics

DIODE ARRAY SCHOTTKY 45V D2PAK
RoHS : Compliant

965 : $0.3114
720 : $0.3473
560 : $0.3593
405 : $0.3713
265 : $0.3832
110 : $0.4671

32,000

NRVTS1545EMFST1G

onsemi

RoHS : Compliant

35 : $9.823
26 : $10.9563
20 : $11.3341
15 : $11.712
10 : $12.0897
4 : $14.7344

30,000

STPS1545CT

STMicroelectronics

DIODE ARRAY SCHOTTKY 45V TO220AB
RoHS : Compliant

765 : $0.394
570 : $0.4394
440 : $0.4546
320 : $0.4697
210 : $0.4849
85 : $0.591

25,932

MBR1545CTG

onsemi

Rectifier Diode Schottky 45V 15A 3-Pin(3+Tab) TO-220AB Tube / DIODE ARRAY SCHOTTKY 45V TO220AB
RoHS : Compliant

630 : $0.4793
470 : $0.5346
365 : $0.553
265 : $0.5714
170 : $0.5899
70 : $0.7189

10,000

NTS1545MFST1G

onsemi

DIODE SCHOTTKY 45V 15A 5DFN / Diode Schottky 45 V 15A Surface Mount 5-DFN (5x6) (8-SOFL)
RoHS : Compliant

26 : $13.0388
20 : $14.5433
15 : $15.0447
11 : $15.5463
7 : $16.0477
3 : $19.5581

6,018

0154.500DR

Littelfuse Inc

FUSE BOARD MNT 500MA 125VAC/VDC
RoHS : Compliant

340 : $0.8864
255 : $0.9887
200 : $1.0228
145 : $1.0569
95 : $1.091
40 : $1.3296

6,000

0154.500DRT

Littelfuse Inc

FUSE BOARD MNT 500MA 125VAC/VDC
RoHS : Compliant

340 : $0.8864
255 : $0.9887
200 : $1.0228
145 : $1.0569
95 : $1.091
40 : $1.3296

5,550

MBR1545CT-E3/45

Vishay Huntington

Dual Common-Cathode Schottky Rectifier

795 : $0.425
595 : $0.4741
460 : $0.4904
335 : $0.5068
215 : $0.5232
90 : $0.6376

3,853

1545-R3B Verteiler

Link URL