1782G-R-AE3-R Price, Verteiler, Stock

Key Specifications, Polarity: Standard, Connector Series: SMA, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp, Mount Method: Bulkhead, Minimum Frequency: DC, Maximum Frequency: 9 GHz, Interface Type 1: RG55, Interface Type 2: RG142, Interface Type 3: RG223, Interface Type 4: RG400. SMA Female Bulkhead Connector Crimp Attachment For RG223, RG55, RG142, and RG400, .268 inch D Hole, IP67 Mated. PE517821 SMA female bulkhead coaxial connector has an interface type of SMA female which is compatible with RG55, RG142, RG223 and RG400 cables and has an impedance of 50 Ohms. Pasternack’s SMA female bulkhead connector uses crimp as an attachment method. Our female SMA coaxial connector provides a maximum frequency of 9 GHz. This SMA female IP67 mated RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online cable creator. The Pasternack SMA female bulkhead coaxial connector has a PTFE dielectric type. Pasternack’s SMA coaxial connector has a brass body with gold over nickel over copper plating. Our PE517821 SMA connector uses a gold over nickel over copper-plated beryllium copper contact. The Pasternack RF connector has a maximum inner and outer conductor resistance of 3 mOhms and 2 mOhms respectively. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 100 cycles or more. The PE517821 SMA bulkhead connector operates at a temperature range of -65 to 165 deg C. This SMA connector has a gold over nickel over copper inner contact plating. The Pasternack SMA female connector has a dielectric withstanding voltage of 1,000 Vrms. This coaxial RF connector comes with a minimum insulation resistance of 5,000 MOhms. Our SMA female connector has a length of 0.823 inches, a width of 0.433 inches, and a weight of 0.011 lbs. This Pasternack female SMA bulkhead connector will ship the same business day as purchased. Our bulkhead SMA female connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements.

1 : $21.59
5 : $21.16
10 : $20.73
25 : $20.29

PE517826

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: SMA, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp, Mount Method: Bulkhead, Minimum Frequency: DC, Maximum Frequency: 2.5 GHz, Interface Type 1: RG178, Interface Type 2: RG178-DS. SMA Female Bulkhead Connector Crimp Attachment For RG178, RG178-DS, .268 inch D Hole, IP67 Mated. PE517826 SMA female bulkhead coaxial connector has an interface type of SMA female which is compatible with RG178 and RG178-DS cables and has an impedance of 50 Ohms. Pasternack’s SMA female bulkhead connector uses crimp as an attachment method. Our female SMA coaxial connector provides a maximum frequency of 2.5 GHz. This SMA female IP67 mated RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online cable creator. The Pasternack SMA female bulkhead coaxial connector has a PTFE dielectric type. Pasternack’s SMA coaxial connector has a brass body with gold over nickel over copper plating. Our PE517826 SMA connector uses a gold over nickel over copper-plated beryllium copper contact. The Pasternack RF connector has a maximum inner and outer conductor resistance of 3 mOhms and 2 mOhms respectively. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 100 cycles or more. The PE517826 SMA bulkhead connector operates at a temperature range of -65 to 165 deg C. This SMA connector has a gold over nickel over copper inner contact plating. The Pasternack SMA female connector has a dielectric withstanding voltage of 750 Vrms. This coaxial RF connector comes with a minimum insulation resistance of 5,000 MOhms. Our SMA female connector has a length of 0.827 inches, a width of 0.433 inches, and a weight of 0.011 lbs. This threaded SMA female coaxial connector features a gold over nickel over copper plated brass coupling nut. This Pasternack female SMA bulkhead connector will ship the same business day as purchased. Our bulkhead SMA female connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements.

1 : $19.59
5 : $19.2
10 : $18.81
25 : $18.41

PE517820

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: SMA, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp, Mount Method: Bulkhead, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: RG58, Interface Type 2: LMR-195. SMA Female Bulkhead Connector Crimp Attachment For RG58, LMR-195, .268 inch D Hole, IP67 Mated. PE517820 SMA female bulkhead coaxial connector has an interface type of SMA female which is compatible with RG58 and LMR®-195 cables and has an impedance of 50 Ohms. Pasternack’s SMA female bulkhead connector uses crimp as an attachment method. Our female SMA coaxial connector provides a maximum frequency of 6 GHz. This SMA female IP67 mated RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online cable creator. The Pasternack SMA female bulkhead coaxial connector has a PTFE dielectric type. Pasternack’s SMA coaxial connector has a brass body with gold over nickel over copper plating. Our PE517820 SMA connector uses a gold over nickel over copper-plated beryllium copper contact. The Pasternack RF connector has a maximum inner and outer conductor resistance of 3 mOhms and 2 mOhms respectively. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 100 cycles or more. The PE517820 SMA bulkhead connector operates at a temperature range of -65 to 165 deg C. This SMA connector has a gold over nickel over copper inner contact plating. The Pasternack SMA female connector has a dielectric withstanding voltage of 1,000 Vrms. This coaxial RF connector comes with a minimum insulation resistance of 5,000 MOhms. Our SMA female connector has a length of 0.823 inches, a width of 0.433 inches, and a weight of 0.011 lbs. This Pasternack female SMA bulkhead connector will ship the same business day as purchased. Our bulkhead SMA female connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements. * LMR® is a registered trademark of Times Microwave Systems.

1 : $21.59
5 : $21.16
10 : $20.73
25 : $20.29

PE517824

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: SMA, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder, Mount Method: Bulkhead, Minimum Frequency: DC, Maximum Frequency: 27 GHz, Interface Type 1: RG405, Interface Type 2: PE-SR405AL, Interface Type 3: PE-SR405FL. SMA Female Bulkhead Connector Solder Attachment For RG405, PE-SR405AL, PE-SR405FL, .236 inch D Hole, IP67 Mated. PE517824 SMA female bulkhead coaxial connector has an interface type of SMA female which is compatible with RG405, PE-SR405AL and PE-SR405FL cables and has an impedance of 50 Ohms. Pasternack’s SMA female bulkhead connector uses solder as an attachment method. Our female SMA coaxial connector provides a maximum frequency of 27 GHz. This SMA female IP67 mated RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online cable creator. The Pasternack SMA female bulkhead coaxial connector has a PTFE dielectric type. Pasternack’s SMA coaxial connector has a brass body with gold over nickel over copper plating. Our PE517824 SMA connector uses a gold over nickel over copper-plated beryllium copper contact. The Pasternack RF connector has a maximum inner and outer conductor resistance of 3 mOhms and 2 mOhms respectively. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 100 cycles or more. The PE517824 SMA bulkhead connector operates at a temperature range of -65 to 165 deg C. This SMA connector has a gold over nickel over copper inner contact plating. The Pasternack SMA female connector has a dielectric withstanding voltage of 1,000 Vrms. This coaxial RF connector comes with a minimum insulation resistance of 5,000 MOhms. Our SMA female connector has a length of 0.748 inches, a width of 0.433 inches, and a weight of 0.008 lbs. This Pasternack female SMA bulkhead connector will ship the same business day as purchased. Our bulkhead SMA female connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements.

1 : $17.39
5 : $17.04
10 : $16.69
25 : $16.35

PE517822

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: SMA, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp, Mount Method: Bulkhead, Minimum Frequency: DC, Maximum Frequency: 11 GHz, Interface Type 1: RG174, Interface Type 2: RG188, Interface Type 3: RG316. SMA Female Bulkhead Connector Crimp Attachment For RG174, RG188, RG316, .268 inch D Hole, IP67 Mated. PE517822 SMA female bulkhead coaxial connector has an interface type of SMA female which is compatible with RG174, RG188 and RG316 cables and has an impedance of 50 Ohms. Pasternack’s SMA female bulkhead connector uses crimp as an attachment method. Our female SMA coaxial connector provides a maximum frequency of 11 GHz. This SMA female IP67 mated RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online cable creator. The Pasternack SMA female bulkhead coaxial connector has a PTFE dielectric type. Pasternack’s SMA coaxial connector has a brass body with gold over nickel over copper plating. Our PE517822 SMA connector uses a gold over nickel over copper-plated beryllium copper contact. The Pasternack RF connector has a maximum inner and outer conductor resistance of 3 mOhms and 2 mOhms respectively. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 100 cycles or more. The PE517822 SMA bulkhead connector operates at a temperature range of -65 to 165 deg C. This SMA connector has a gold over nickel over copper inner contact plating. The Pasternack SMA female connector has a dielectric withstanding voltage of 750 Vrms. This coaxial RF connector comes with a minimum insulation resistance of 5,000 MOhms. Our SMA female connector has a length of 0.787 inches, a width of 0.433 inches, and a weight of 0.011 lbs. This Pasternack female SMA bulkhead connector will ship the same business day as purchased. Our bulkhead SMA female connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements.

1 : $20.39
5 : $19.98
10 : $19.57
25 : $19.17

PE517827

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: SMA, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp, Mount Method: Bulkhead, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: RG178, Interface Type 2: RG178-DS. SMA Female Bulkhead Connector Press Fit Attachment For RG178, RG178-DS, .236 inch D Hole, IP67 Mated. PE517827 SMA female bulkhead coaxial connector has an interface type of SMA female which is compatible with RG178 and RG178-DS cables and has an impedance of 50 Ohms. Pasternack’s SMA female bulkhead connector uses crimp as an attachment method. Our female SMA coaxial connector provides a maximum frequency of 6 GHz. This SMA female IP67 mated RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online cable creator. The Pasternack SMA female bulkhead coaxial connector has a PTFE dielectric type. Pasternack’s SMA coaxial connector has a brass body with gold over nickel over copper plating. Our PE517827 SMA connector uses a gold over nickel over copper-plated beryllium copper contact. The Pasternack RF connector has a maximum inner and outer conductor resistance of 3 mOhms and 2 mOhms respectively. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 100 cycles or more. The PE517827 SMA bulkhead connector operates at a temperature range of -65 to 165 deg C. This SMA connector has a gold over nickel over copper inner contact plating. The Pasternack SMA female connector has a dielectric withstanding voltage of 750 Vrms. This coaxial RF connector comes with a minimum insulation resistance of 5,000 MOhms. Our SMA female connector has a length of 0.618 inches, a width of 0.433 inches, and a weight of 0.009 lbs. This Pasternack female SMA bulkhead connector will ship the same business day as purchased. Our bulkhead SMA female connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements.

1 : $19.59
5 : $19.2
10 : $18.81
25 : $18.41

PE3W17826

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG303HV, RF Cable Type: RG303 Hi Voltage, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to TNC Female Bulkhead Cable Using RG303HV Coax. PE3W17826 is a TNC female bulkhead to TNC female bulkhead cable using RG303 Hi Voltage coax. This Pasternack TNC female bulkhead to TNC female bulkhead cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our female TNC bulkhead to female TNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17826 TNC female bulkhead to TNC female bulkhead cable assembly is constructed with RG303 Hi Voltage coax.

PE3W17829-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 3.5mm Male to TNC Female Cable 6 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly 3.5mm male to TNC female cable 6 inch length using PE-SR402FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to TNC female cable 6 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a TNC cable connection on the other. Our a 3.5mm to a TNC cable assembly has male gender on end 1 and female on end 2. PE3W17829-6 can also be known as a 3.5mm plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17829-6 RF cable has a FEP jacket of 0.161-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. 3.5mm plug to TNC jack cable assembly PE3W17829-6 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17829-6 can also be used in the other direction and will be TNC female to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements.

1 : $259.99
25 : $246.99
50 : $233.99
100 : $223.59

PE3W11782

Pasternack Enterprises

Key Specifications, Connector Series 1: FME, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. FME Jack to SMA Female Bulkhead Cable Using LMR-100 Coax. PE3W11782 is a FME jack to SMA female bulkhead cable using LMR-100A coax. This Pasternack FME jack to SMA female bulkhead cable assembly uses a 50 Ohm FME for connector 1 and a 50 Ohm SMA for connector 2. Our jack FME to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11782 FME jack to SMA female bulkhead cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE34178-24

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male to N Female Bulkhead Cable 24 Inch Length Using PE-P195 Coax., Radio frequency assembly SMA male to N female bulkhead cable 24 inch length using PE-P195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to N female bulkhead cable 24 inch length using PE-P195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and type N bulkhead cable connection on the other. Our SMA to type N cable assemblies have a male gender on end 1 and female on end 2. This SMA to N type cable is a male to female coax assembly, PE34178-24, can also be known as a SMA plug to type N jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE34178-24 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this SMA male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34178-24 can also be used in the other direction and will be type N female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N female bulkhead cable 24 inch length using PE-P195 coax.

1 : $69.99
25 : $66.49
50 : $62.99
100 : $60.19

PE3W17822

Pasternack Enterprises

Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. QMA Male to SMA Male Cable Using PE-P195 Coax. PE3W17822 is a QMA male to SMA male cable using PE-P195 coax. This Pasternack QMA male to SMA male cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm SMA for connector 2. Our male QMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17822 QMA male to SMA male cable assembly is constructed with PE-P195 coax.

PE3W21782

Pasternack Enterprises

Key Specifications, Connector Series 1: C, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: C, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. C Male Right Angle to C Male Right Angle Cable Using RG400 Coax. PE3W21782 is a C male right angle to C male right angle cable using RG400 coax. This Pasternack C male right angle to C male right angle cable assembly uses a 50 Ohm C for connector 1 and a 50 Ohm C for connector 2. C right angle to C right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male C right angle to male C right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21782 C male right angle to C male right angle cable assembly is constructed with RG400 coax.

PE3W17829

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. 3.5mm Male to TNC Female Cable Using PE-SR402FLJ Coax., Radio frequency assembly 3.5mm male to TNC female cable using PE-SR402FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to TNC female cable using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a TNC cable connection on the other. Our a 3.5mm to a TNC cable assembly has male gender on end 1 and female on end 2. PE3W17829 can also be known as a 3.5mm plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17829 RF cable has a FEP jacket of 0.161-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. 3.5mm plug to TNC jack cable assembly PE3W17829 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17829 can also be used in the other direction and will be TNC female to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements.

PE3W17829-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. 3.5mm Male to TNC Female Cable 9 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly 3.5mm male to TNC female cable 9 inch length using PE-SR402FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to TNC female cable 9 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a TNC cable connection on the other. Our a 3.5mm to a TNC cable assembly has male gender on end 1 and female on end 2. PE3W17829-9 can also be known as a 3.5mm plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17829-9 RF cable has a FEP jacket of 0.161-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. 3.5mm plug to TNC jack cable assembly PE3W17829-9 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17829-9 can also be used in the other direction and will be TNC female to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements.

1 : $261.99
25 : $248.89
50 : $235.79
100 : $225.31

PE3C1782

Pasternack Enterprises

Sager

1-178293-3

TE Connectivity

Headers & Wire Housings HDR 3 POS R/A 30 AU KEY-X
RoHS : Compliant

1,840 : $3.63

70178-2183

OMRON Electronic Components

Specialty Controllers SGE-245-2-1200 01800C

0011311782

Molex

Other Tools AM60510-81 SHUTTLE FRONT GUARD

1 : $287.48
3 : $266.94
5 : $257.74
11 : $249.15
27 : $241.11

HLCD-40-17.82-TR-TR-1

Samtec Inc

Rectangular Cable Assemblies
RoHS : Compliant

1 : $101.89
10 : $94.76
25 : $87.18
50 : $82.82
100 : $78.68

AP1-782-1

Sensata Circuit Breakers

Circuit Breakers

2381178-2

TE Connectivity

COVER,HC-STACK35,1POS,CABLE,95MM2

725 : $0.7237
2,175 : $0.7036

1617827-5

TE Connectivity

Time Delay & Timing Relays 1621-C-0700 1600 FIXED OPERA
RoHS : Not Compliant

1 : $3,834.66
4 : $3,690.87

1782006

Phoenix Contact

Pluggable Terminal Blocks 11 Pos 3.81mm pitch Through Hole Header
RoHS : Unknown

1782132

Phoenix Contact

Pluggable Terminal Blocks 2 Pos 3.81mm pitch Through Hole Header
RoHS : Compliant

1782213

Phoenix Contact

Pluggable Terminal Blocks 10 Pos 3.81mm pitch Through Hole Header
RoHS : Compliant

1782420

Phoenix Contact

Pluggable Terminal Blocks 9 Pos 3.81mm pitch Through Hole Header
RoHS : Compliant

50 : $4.59
100 : $4.41
200 : $4.25
400 : $4.09

219-3-21782-6

Sensata Circuit Breakers

Circuit Breakers

A17820-05

Qnity Laird

Thermal Interface Products TFLEX HD91250,DC1

2 : $184.12
5 : $175.75
10 : $168.11
25 : $161.1

0011217828

Molex

0011317827

Molex

Cable Mounting & Accessories WIRE CLAMP COVER

1 : $966.52
3 : $934.31
7 : $904.17

TE Connectivity

1971782-1

TE Connectivity

PTL TAB CONTACT, 14 AWG Contact Mating Area Plating Material: Tin (Sn) Contact Type: Tab Wire Contact Termination Area Plating Material: Pre-Tin Wire Size: 14 AWG Operating Voltage: 600 VAC Tin (Sn) Tab Pre-Tin 14 AWG | Tab Contact — Power Triple Lock | Part Number: 1971782-1 | Internal Number: 1971782-1 | TE Connectivity
RoHS : Compliant

1,000 : $0.05
100 : $0.07
10 : $0.09
1 : $0.12

41,890

1-178288-7

TE Connectivity

DYNAMIC D3100S REC HSG 8P X Number of Positions: 8 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Termination Method to Wire & Cable: Crimp Receptacle And Tab Housing: 3.81 Mm Pitch & 250V | 8 Receptacle Housing With | Part Number: 1-178288-7 | Internal Number: 1-178288-7 | TE Connectivity
RoHS : Compliant

1,000 : $1.64
500 : $1.69
250 : $1.74
100 : $1.79
50 : $1.84
25 : $1.89
10 : $1.94
1 : $1.99

23,007

1-178288-4

TE Connectivity

DYNAMIC 3100 REC HSG 4P Number of Positions: 4 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Termination Method to Wire & Cable: Crimp Receptacle And Tab Housing: 3.81 Mm Pitch & 250V | 4 Receptacle Housing With | Part Number: 1-178288-4 | Internal Number: 1-178288-4 | TE Connectivity
RoHS : Compliant

1,000 : $1.25
500 : $1.28
250 : $1.32
100 : $1.36
50 : $1.4
25 : $1.43
10 : $1.47
1 : $1.51

12,810

2-178293-2

TE Connectivity

DYNAMIC D3100 HDR H 3P ASSY PdNi PCB Connector Type: PCB Mount Header PCB Mount Orientation: Horizontal Connector System: Wire-to-Board Number of Positions: 3 Number of Rows: 1 PCB Mount Header Horizontal Wire-to-Board 3 | Header Assembly: Wire-To-Board & 15A & Gold Or Tin Plated | Part Number: 2-178293-2 | Internal Number: 2-178293-2 | TE Connectivity
RoHS : Compliant

5,000 : $4.21
2,500 : $4.31
1,000 : $4.42
500 : $4.52
250 : $4.62
100 : $4.73
50 : $4.83
25 : $4.93
10 : $5.03
1 : $5.14

5,298

178289-8

TE Connectivity

DYNAMIC D3100 REC HSG 20P Number of Positions: 20 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Termination Method to Wire & Cable: Crimp Receptacle And Tab Housing: 3.81 Mm Pitch & 250V | 20 Receptacle Housing With | Part Number: 178289-8 | Internal Number: 178289-8 | TE Connectivity
RoHS : Compliant

2,500 : $2.64
1,000 : $2.71
500 : $2.78
250 : $2.85
100 : $2.92
50 : $2.99
25 : $3.06
10 : $3.14
1 : $3.21

3,559

1-178293-2

TE Connectivity

DYNAMIC D3100 HDR H 3P ASSY PdNi & Au PL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Horizontal Connector System: Wire-to-Board Number of Positions: 3 Number of Rows: 1 PCB Mount Header Horizontal Wire-to-Board 3 | Header Assembly: Wire-To-Board & 15A & Gold Or Tin Plated | Part Number: 1-178293-2 | Internal Number: 1-178293-2 | TE Connectivity
RoHS : Compliant

5,000 : $4.04
2,500 : $4.14
1,000 : $4.24
500 : $4.34
250 : $4.44
100 : $4.53
50 : $4.63
25 : $4.73
10 : $4.83
1 : $4.93

3,543

1-178293-5

TE Connectivity

DYNAMIC D3100 HDR H 3P ASSY PCB Connector Type: PCB Mount Header PCB Mount Orientation: Horizontal Connector System: Wire-to-Board Number of Positions: 3 Number of Rows: 1 PCB Mount Header Horizontal Wire-to-Board 3 | Header Assembly: Wire-To-Board & 15A & Gold Or Tin Plated | Part Number: 1-178293-5 | Internal Number: 1-178293-5 | TE Connectivity
RoHS : Compliant

5,000 : $2.49
2,500 : $2.55
1,000 : $2.61
500 : $2.67
250 : $2.73
100 : $2.79
50 : $2.85
25 : $2.92
10 : $2.98
1 : $3.04

3,341

1-178296-5

TE Connectivity

DYNAMIC D3100 HDR ASSY 6P H K/X PCB Connector Type: PCB Mount Header PCB Mount Orientation: Horizontal Connector System: Wire-to-Board Number of Positions: 6 Number of Rows: 1 PCB Mount Header Horizontal Wire-to-Board 6 | Header Assembly: Wire-To-Board & 15A & Gold Or Tin Plated | Part Number: 1-178296-5 | Internal Number: 1-178296-5 | TE Connectivity
RoHS : Compliant

5,000 : $3.74
2,500 : $3.83
1,000 : $3.92
500 : $4.01
250 : $4.1
100 : $4.19
50 : $4.28
25 : $4.37
10 : $4.46
1 : $4.56

2,882

1-178293-3

TE Connectivity

DYNAMIC D3100 HDR H 3P ASSY PdNI PCB Connector Type: PCB Mount Header PCB Mount Orientation: Horizontal Connector System: Wire-to-Board Number of Positions: 3 Number of Rows: 1 PCB Mount Header Horizontal Wire-to-Board 3 | Header Assembly: Wire-To-Board & 15A & Gold Or Tin Plated | Part Number: 1-178293-3 | Internal Number: 1-178293-3 | TE Connectivity
RoHS : Compliant

1,000 : $6.17
500 : $6.35
250 : $6.54
100 : $6.73
50 : $6.92
25 : $7.1
10 : $7.29
1 : $7.48

2,272

178216-3

TE Connectivity

DYNAMIC 3400 HDR H 12P ASSY PdNi PL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Horizontal Connector System: Wire-to-Board Number of Positions: 12 Number of Rows: 4 PCB Mount Header Horizontal Wire-to-Board 12 | Header Assembly: Wire-To-Board & 15A & Gold Or Tin Plated | Part Number: 178216-3 | Internal Number: 178216-3 | TE Connectivity
RoHS : Compliant

500 : $18.96
250 : $19.61
100 : $20.26
50 : $20.92
25 : $21.57
10 : $22.23
1 : $22.88

1,683

2-178288-4

TE Connectivity

DYNAMIC 3100 REC HSG 4P BLACK Number of Positions: 4 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Termination Method to Wire & Cable: Crimp Receptacle And Tab Housing: 3.81 Mm Pitch & 250V | 4 Receptacle Housing With | Part Number: 2-178288-4 | Internal Number: 2-178288-4 | TE Connectivity
RoHS : Compliant

1,000 : $0.79
500 : $0.82
250 : $0.84
100 : $0.87
50 : $0.89
25 : $0.92
10 : $0.94
1 : $0.96

1,634

178289-6

TE Connectivity

DYNAMIC 3100 REC HSG 12P DBL Number of Positions: 12 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Termination Method to Wire & Cable: Crimp Receptacle And Tab Housing: 3.81 Mm Pitch & 250V | 12 Receptacle Housing With | Part Number: 178289-6 | Internal Number: 178289-6 | TE Connectivity
RoHS : Compliant

1,000 : $2.0
500 : $2.06
250 : $2.12
100 : $2.18
50 : $2.24
25 : $2.31
10 : $2.37
1 : $2.43

1,585

1-178288-6

TE Connectivity

DYNAMIC D3100 REC HSG 6P Number of Positions: 6 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Termination Method to Wire & Cable: Crimp Receptacle And Tab Housing: 3.81 Mm Pitch & 250V | 6 Receptacle Housing With | Part Number: 1-178288-6 | Internal Number: 1-178288-6 | TE Connectivity
RoHS : Compliant

1,000 : $1.47
500 : $1.51
250 : $1.56
100 : $1.6
50 : $1.65
25 : $1.69
10 : $1.73
1 : $1.78

1,491

1-178294-5

TE Connectivity

DYNAMIC D3100 HDR ASY 4P H K/X PCB Connector Type: PCB Mount Header PCB Mount Orientation: Horizontal Connector System: Wire-to-Board Number of Positions: 4 Number of Rows: 1 PCB Mount Header Horizontal Wire-to-Board 4 | Header Assembly: Wire-To-Board & 15A & Gold Or Tin Plated | Part Number: 1-178294-5 | Internal Number: 1-178294-5 | TE Connectivity
RoHS : Compliant

2,500 : $3.15
1,000 : $3.23
500 : $3.32
250 : $3.4
100 : $3.49
50 : $3.57
25 : $3.66
10 : $3.74
1 : $3.83

1,213

111782-8

TE Connectivity

039/040 LOPRO HDR SP 15DP Connector System: Board-to-Board Number of Positions: 40 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Board-to-Board 40 2.54 mm .1" | Ribbon Cable Connector | Part Number: 111782-8 | Internal Number: 111782-8 | TE Connectivity
RoHS : Compliant

1,000 : $2.7
500 : $2.78
250 : $2.86
100 : $2.96
50 : $3.04
1 : $3.34

352

Venkel Ltd.

MELFC0204-TN-1782FT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�10PPM;17.8K;�1%
RoHS : Compliant

MELFC0204-TP-1782BT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�5PPM;17.8K;�0.1%
RoHS : Compliant

MELFC0204-ZN-1782DT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�10PPM;17.8K;�0.5%
RoHS : Compliant

MELFC0207-XK-1782FT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�100PPM;17.8K;�1%
RoHS : Compliant

HPTF0603-QN-1782UT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�10PPM;17.8K;�0.01%
RoHS : Compliant

HPTF0805-RE-1782AT

VENKEL LTD

High Power Thin Film CR;0805;1/8W;�25PPM;17.8K;�0.05%
RoHS : Compliant

HPTF1206-TN-1782DT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�10PPM;17.8K;�0.5%
RoHS : Compliant

HPTF2010-UP-1782CT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�5PPM;17.8K;�0.25%
RoHS : Compliant

AGCR0402-PK-1782FT

VENKEL LTD

Auto Grade Resistor;0402;1/16W;�100PPM;17.8K;�1%
RoHS : Compliant

MELFC0102-RE-1782CT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�25PPM;17.8K;�0.25%
RoHS : Compliant

MELFC0102-UE-1782FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/5W;�25PPM;17.8K;�1%
RoHS : Compliant

MELFC0204-TC-1782DT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�50PPM;17.8K;�0.5%
RoHS : Compliant

MELFC0204-ZC-1782BT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�50PPM;17.8K;�0.1%
RoHS : Compliant

MELFC0207-XN-1782BT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�10PPM;17.8K;�0.1%
RoHS : Compliant

TFCR0603-16W-C-1782FT

VENKEL LTD

Thin Film CR;0603;1/16W;�50PPM;17.8K;�1%
RoHS : Compliant

Vyrian

LT1782IS6#TR

Analog Devices Inc

Operational Amplifier, 1 Func, 1200uV Offset-Max, BIPolar, PDSO6
RoHS : Not Compliant

11,514

MAX17823HGCB/V+

Analog Devices Inc

ADC, Successive Approximation, 12-Bit, 1 Func, 12 Channel, PQFP64
RoHS : Compliant

10,773

MAX17823BGCB/V+

Analog Devices Inc

A/D Converter
RoHS : Compliant

10,045

1782501

Phoenix Contact

Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

9,695

PCM1782DBQG4

Texas Instruments

D/A Converter, 1 Func, Serial Input Loading, PDSO16
RoHS : Compliant

7,597

PIC16F1782-I/MV

Microchip Technology Inc

RISC Microcontroller, 8-Bit, FLASH, PIC16 CPU, 32MHz, CMOS, PQCC28
RoHS : Compliant

7,064

PCM1782DBQRG4

Texas Instruments

D/A Converter, 1 Func, Serial Input Loading, PDSO16
RoHS : Compliant

6,817

TC1782N320F180HRBAKXUMA1

Infineon Technologies AG

RISC Microcontroller, 32-Bit, 133MHz, CMOS
RoHS : Compliant

6,668

1782598

Phoenix Contact

Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

4,397

XCVH1782-1MSILSVA4737

AMD Xilinx

Microprocessor
RoHS : Compliant

4,023

SN65HVD1782DG4

Texas Instruments

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO8
RoHS : Compliant

3,257

XCVH1782-1MSELSVA4737

AMD Xilinx

Microprocessor Circuit, CMOS, PBGA4737
RoHS : Compliant

2,497

XCVH1782-3HSELSVA4737

AMD Xilinx

Microprocessor Circuit, CMOS, PBGA4737
RoHS : Compliant

2,133

SAK-TC1782N-320F180HRBA

Infineon Technologies AG

RISC Microcontroller, 32-Bit, 133MHz, CMOS
RoHS : Unknown

819

PTN0805E1782BBT1

Vishay Intertechnologies

Fixed Resistor, Thin Film, 0.2W, 17800ohm, 100V, 0.1% +/-Tol, 25ppm/Cel, Surface Mount, 0805
RoHS : Not Compliant

633

1782G-R-AE3-R Verteiler

Link URL