18S-R22 Price, Verteiler, Stock

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm. SMA Male to Trimmed Lead Cable Using RG196 Coax., Radio frequency assembly SMA male to trimmed lead cable using RG196 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to trimmed lead cable using RG196 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to trimmed lead cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and trimmed lead cable connection on the other. Our SMA to trimmed lead cable assembly has male gender on end 1 and sexless on end 2. PE3C5018/S can also be known as a SMA plug to trimmed lead sexless cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA plug to trimmed lead sexless cable assembly PE3C5018/S is built with RG196 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to trimmed lead cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C5018/S RF cable are available on our downloadable PDF datasheet.PE3C5018/S can also be used in the other direction and will be trimmed lead sexless to SMA male cable assembly if the opposite connectivity is required. SMA plug to trimmed lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to trimmed lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

405

PE3C5018/S-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to Trimmed Lead Cable 12 Inch Length Using RG196 Coax., Radio frequency assembly SMA male to trimmed lead cable 12 inch length using RG196 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to trimmed lead cable 12 inch length using RG196 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to trimmed lead cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and trimmed lead cable connection on the other. Our SMA to trimmed lead cable assembly has male gender on end 1 and sexless on end 2. PE3C5018/S-12 can also be known as a SMA plug to trimmed lead sexless cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA plug to trimmed lead sexless cable assembly PE3C5018/S-12 is built with RG196 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to trimmed lead cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C5018/S-12 RF cable are available on our downloadable PDF datasheet.PE3C5018/S-12 can also be used in the other direction and will be trimmed lead sexless to SMA male cable assembly if the opposite connectivity is required. SMA plug to trimmed lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to trimmed lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

1 : $58.89
25 : $55.95
50 : $53.0
100 : $50.65

PE3C5018/S-72

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. SMA Male to Trimmed Lead Cable 72 Inch Length Using RG196 Coax., Radio frequency assembly SMA male to trimmed lead cable 72 inch length using RG196 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to trimmed lead cable 72 inch length using RG196 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to trimmed lead cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and trimmed lead cable connection on the other. Our SMA to trimmed lead cable assembly has male gender on end 1 and sexless on end 2. PE3C5018/S-72 can also be known as a SMA plug to trimmed lead sexless cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA plug to trimmed lead sexless cable assembly PE3C5018/S-72 is built with RG196 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to trimmed lead cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C5018/S-72 RF cable are available on our downloadable PDF datasheet.PE3C5018/S-72 can also be used in the other direction and will be trimmed lead sexless to SMA male cable assembly if the opposite connectivity is required. SMA plug to trimmed lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to trimmed lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

1 : $72.79
25 : $69.15
50 : $65.51
100 : $62.6

PE3C5018/S-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to Trimmed Lead Cable 24 Inch Length Using RG196 Coax., Radio frequency assembly SMA male to trimmed lead cable 24 inch length using RG196 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to trimmed lead cable 24 inch length using RG196 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to trimmed lead cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and trimmed lead cable connection on the other. Our SMA to trimmed lead cable assembly has male gender on end 1 and sexless on end 2. PE3C5018/S-24 can also be known as a SMA plug to trimmed lead sexless cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA plug to trimmed lead sexless cable assembly PE3C5018/S-24 is built with RG196 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to trimmed lead cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C5018/S-24 RF cable are available on our downloadable PDF datasheet.PE3C5018/S-24 can also be used in the other direction and will be trimmed lead sexless to SMA male cable assembly if the opposite connectivity is required. SMA plug to trimmed lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to trimmed lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

1 : $62.09
25 : $58.99
50 : $55.88
100 : $53.4

PEANGPS1018-SM-060

Pasternack Enterprises

Key Specifications, Antenna Type: GPS/GNSS Active, Polarization: RHCP, Minimum Frequency: 1.56 GHz, Maximum Frequency: 1.61 GHz, Connector Series: SMA, Connector Gender: Male, Maximum Input VSWR: 1.8:1. L1 GNSS Antenna, LNA, Magnet Mount, 5ft Pigtail w/ SMA Male., The PEANGPS1018-SM-060 from Pasternack is a GPS/GNSS active antenna with an integrated low noise amplifier (LNA) that we offer with global same-business-day shipping. Our RHCP polarized L1 GNSS antenna has a maximum input VSWR of 1.8:1. Our GPS/GNSS active patch antenna is designed to operate within a DC voltage range of 2.5 to 16 Volts. Pasternack’s PEANGPS1018-SM-060 GNSS antenna can operate at frequencies ranging from 1.56 to 1.61 GHz. Our antenna can withstand temperatures ranging from -40 to 85 deg C. This GPS/GNSS active antenna has a 60-inch long pigtail with an SMA male connector. Our RHCP polarized antenna features a magnetic mount base. This RHCP polarized antenna has an overall length of 2.25 inches, a width of 2.25 inches, and a weight of 0.33 lbs. Our PEANGPS1018-SM-060 L1 GNSS antenna has a nominal gain of 30.8 dBic. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of GPS/GNSS active antennas for international and domestic orders. Make your online purchase right now to take advantage of our same business day shipping with no MOQs (minimum order quantities). For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal GNSS antenna for your requirements.

1 : $128.45
10 : $125.88
25 : $123.31
100 : $120.74

PE3W10718/SP

Pasternack Enterprises

PE3W10718/SP1-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male Right Angle to N Male Right Angle Low Loss Cable 60Inch Using LMR-400 Coax With Times Microwave Parts HeatShrink and 180 Deg. Clock., Radio frequency assembly TNC male right angle to N male right angle low loss cable 60Inch using LMR-400 coax with Times Microwave parts heatshrink and 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to N male right angle low loss cable 60Inch using LMR-400 coax with Times Microwave parts heatshrink and 180 deg. clock, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle N type cable connection on the other. Our low loss right angle TNC to right angle type N cable assemblies have a male gender on end 1 and male on end 2. PE3W10718/SP1-60 can also be known as a low loss right angle TNC plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. TNC plug to N type plug cable assembly PE3W10718/SP1-60 is built with LMR-400 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC right angle male to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10718/SP1-60 can also be used in the other direction and will be right angle type N male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to N male right angle low loss cable 60Inch using LMR-400 coax with Times Microwave parts heatshrink and 180 deg. clock.

1 : $162.99
25 : $154.84
50 : $146.69
100 : $140.17

PE3W10718/SP1

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to N Male Right Angle Low Loss Cable Using LMR-400 Coax With Times Microwave Parts with HeatShrink and 180 Deg. Clock., Radio frequency assembly TNC male right angle to N male right angle low loss cable using LMR-400 coax with Times Microwave parts with heatshrink and 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to N male right angle low loss cable using LMR-400 coax with Times Microwave parts with heatshrink and 180 deg. clock, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle N type cable connection on the other. Our low loss right angle TNC to right angle type N cable assemblies have a male gender on end 1 and male on end 2. PE3W10718/SP1 can also be known as a low loss right angle TNC plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. TNC plug to type N plug cable assembly PE3W10718/SP1 is built with LMR-400 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC right angle male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10718/SP1 can also be used in the other direction and will be right angle N type male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to N male right angle low loss cable using LMR-400 coax with Times Microwave parts with heatshrink and 180 deg. clock.

PE3C7918/SP

Pasternack Enterprises

PE3W10718/SP1-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Male Right Angle to N Male Right Angle Low Loss Cable 48Inch Using LMR-400 Coax With Times Microwave Parts HeatShrink and 180 Deg. Clock., Radio frequency assembly TNC male right angle to N male right angle low loss cable 48Inch using LMR-400 coax with Times Microwave parts heatshrink and 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to N male right angle low loss cable 48Inch using LMR-400 coax with Times Microwave parts heatshrink and 180 deg. clock, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle type N cable connection on the other. Our low loss right angle TNC to right angle type N cable assemblies have a male gender on end 1 and male on end 2. PE3W10718/SP1-48 can also be known as a low loss right angle TNC plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. TNC plug to type N plug cable assembly PE3W10718/SP1-48 is built with LMR-400 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC right angle male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10718/SP1-48 can also be used in the other direction and will be right angle type N male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to N male right angle low loss cable 48Inch using LMR-400 coax with Times Microwave parts heatshrink and 180 deg. clock.

1 : $160.99
25 : $152.94
50 : $144.89
100 : $138.45

PE3W10718/SP1-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Male Right Angle to N Male Right Angle Low Loss Cable 36Inch Using LMR-400 Coax With Times Microwave Parts HeatShrink and 180 Deg. Clock., Radio frequency assembly TNC male right angle to N male right angle low loss cable 36Inch using LMR-400 coax with Times Microwave parts heatshrink and 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to N male right angle low loss cable 36Inch using LMR-400 coax with Times Microwave parts heatshrink and 180 deg. clock, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle type N cable connection on the other. Our low loss right angle TNC to right angle N type cable assemblies have a male gender on end 1 and male on end 2. PE3W10718/SP1-36 can also be known as a low loss right angle TNC plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. TNC plug to type N plug cable assembly PE3W10718/SP1-36 is built with LMR-400 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC right angle male to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10718/SP1-36 can also be used in the other direction and will be right angle type N male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to N male right angle low loss cable 36Inch using LMR-400 coax with Times Microwave parts heatshrink and 180 deg. clock.

1 : $158.99
25 : $151.04
50 : $143.09
100 : $136.73

PE3W03818/SP

Pasternack Enterprises

PEANGPS1018-SM-180

Pasternack Enterprises

Key Specifications, Antenna Type: GPS/GNSS Active, Polarization: RHCP, Minimum Frequency: 1.56 GHz, Maximum Frequency: 1.61 GHz, Connector Series: SMA, Connector Gender: Male, Maximum Input VSWR: 1.8:1. L1 GNSS Antenna, LNA, Magnet Mount, 15ft Pigtail w/ SMA Male., The PEANGPS1018-SM-180 from Pasternack is a GPS/GNSS active antenna with an integrated low noise amplifier (LNA) that we offer with global same-business-day shipping. Our RHCP polarized L1 GNSS antenna has a maximum input VSWR of 1.8:1. Our GPS/GNSS active patch antenna is designed to operate within a DC voltage range of 2.5 to 16 Volts. Pasternack’s PEANGPS1018-SM-180 GNSS antenna can operate at frequencies ranging from 1.56 to 1.61 GHz. Our antenna can withstand temperatures ranging from -40 to 85 deg C. This GPS/GNSS active antenna has a 180-inch long pigtail with an SMA male connector. Our RHCP polarized antenna features a magnetic mount base. This RHCP polarized antenna has an overall length of 2.25 inches, a width of 2.25 inches, and a weight of 0.33 lbs. Our PEANGPS1018-SM-180 L1 GNSS antenna has a nominal gain of 30.8 dBic. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of GPS/GNSS active antennas for international and domestic orders. Make your online purchase right now to take advantage of our same business day shipping with no MOQs (minimum order quantities). For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal GNSS antenna for your requirements.

1 : $128.45
25 : $123.31
50 : $119.46
100 : $116.89

PE3W10718/SP1-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Male Right Angle to N Male Right Angle Low Loss Cable 12Inch Using LMR-400 Coax With Times Microwave Parts HeatShrink and 180 Deg. Clock., Radio frequency assembly TNC male right angle to N male right angle low loss cable 12Inch using LMR-400 coax with Times Microwave parts heatshrink and 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to N male right angle low loss cable 12Inch using LMR-400 coax with Times Microwave parts heatshrink and 180 deg. clock, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle N type cable connection on the other. Our low loss right angle TNC to right angle type N cable assemblies have a male gender on end 1 and male on end 2. PE3W10718/SP1-12 can also be known as a low loss right angle TNC plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. TNC plug to type N plug cable assembly PE3W10718/SP1-12 is built with LMR-400 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC right angle male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10718/SP1-12 can also be used in the other direction and will be right angle type N male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to N type cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to N male right angle low loss cable 12Inch using LMR-400 coax with Times Microwave parts heatshrink and 180 deg. clock.

1 : $158.99
25 : $151.04
50 : $143.09
100 : $136.73

PE3W10718/SP1-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Male Right Angle to N Male Right Angle Low Loss Cable 24Inch Using LMR-400 Coax With Times Microwave Parts HeatShrink and 180 Deg. Clock., Radio frequency assembly TNC male right angle to N male right angle low loss cable 24Inch using LMR-400 coax with Times Microwave parts heatshrink and 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to N male right angle low loss cable 24Inch using LMR-400 coax with Times Microwave parts heatshrink and 180 deg. clock, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle N type cable connection on the other. Our low loss right angle TNC to right angle type N cable assemblies have a male gender on end 1 and male on end 2. PE3W10718/SP1-24 can also be known as a low loss right angle TNC plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. TNC plug to type N plug cable assembly PE3W10718/SP1-24 is built with LMR-400 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC right angle male to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10718/SP1-24 can also be used in the other direction and will be right angle type N male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to N male right angle low loss cable 24Inch using LMR-400 coax with Times Microwave parts heatshrink and 180 deg. clock.

1 : $160.99
25 : $152.94
50 : $144.89
100 : $138.45

Vyrian

ZTX718STZ

Diodes Incorporated

Power Bipolar Transistor, 2.5A I(C), 20V V(BR)CEO, 1-Element, PNP, Silicon, Plastic/Epoxy, 3 Pin

17,531

ADM8618SCXAKSZ-RL7

Analog Devices Inc

Power Management Circuit, CMOS, PDSO4
RoHS : Compliant

10,010

LMP92018SQX/NOPB

Texas Instruments

Power Supply Support Circuit, Adjustable, 12 Channel
RoHS : Compliant

9,841

BCM54618SA2IFBG

Broadcom Limited

8,897

DS18S20-C01-W

Analog Devices Inc

Serial Switch/Digital Sensor

8,559

MT28C256532W18SFT-F605P85BBWT

Micron Technology Inc

Memory Circuit, 8MX16, CMOS, PBGA88

7,091

MT28C256564W18SFT-F60P70BTWT

Micron Technology Inc

Memory Circuit, 8MX16, CMOS, PBGA88

6,858

MT28C256532W18SBT-F605P85BTWT

Micron Technology Inc

Memory Circuit, 8MX16, CMOS, PBGA88

6,391

MT28C256564W18SBT-F606P85TTWT

Micron Technology Inc

Memory Circuit, 8MX16, CMOS, PBGA88

6,226

MT28C256532W18SBT-F605P70TTWT

Micron Technology Inc

Memory Circuit, 8MX16, CMOS, PBGA88

5,639

MT28C256532W18SFT-F70P85TBWT

Micron Technology Inc

Memory Circuit, Flash+PSRAM, 8MX16, CMOS, PBGA88
RoHS : Not Compliant

5,328

MT28C256564W18SFT-F606P85TBWT

Micron Technology Inc

Memory Circuit, 8MX16, CMOS, PBGA88

4,224

MT28C256564W18SFT-F705P70TTWT

Micron Technology Inc

Memory Circuit, Flash+PSRAM, 8MX16, CMOS, PBGA88
RoHS : Not Compliant

3,892

MT28C256532W18SBT-F706P85BBWT

Micron Technology Inc

Memory Circuit, 8MX16, CMOS, PBGA88

3,883

MT28C256564W18SBT-F606P70TBWT

Micron Technology Inc

Memory Circuit, 8MX16, CMOS, PBGA88

3,774

Waytek, Inc.

AWV-18S

Amphenol Sine Systems

Amphenol Sine Systems AWV-18S ATV Series wedgelock is an 18-way plug wedgelock for ATV connector plugs. It supports the compact sealed ATV system, works with the 18-circuit ATV06 plug, and helps secure contacts in harsh-environment assemblies.

1 : $0.531
10 : $0.5081
50 : $0.4966
100 : $0.485
200 : $0.4735
500 : $0.462

1,442

53-3318-S

Eaton Electronics

Eaton Bussmann Series 53-3318 Euro SR panel plug is a black panel-mount filler for 8006 and 8007 Euro SR rocker switch openings. It fits the standard 37 mm x 21 mm opening and is RoHS compliant for clean switch-panel layouts.

4 : $1.8768
50 : $1.8105
100 : $1.7442
200 : $1.6559
500 : $1.6008

1,134

AT16-18SB-K004

Amphenol Sine Systems

Amphenol Sine Systems AT16-18SB-K004 AT Series connector plug is an 18-way, Key B housing for Deutsch DT-compatible assemblies. It supports 20-14 gauge wire and uses durable thermoplastic with front and rear silicone seals for environmental protection.

1 : $7.3
10 : $7.02
50 : $6.8
100 : $6.44
200 : $6.2
500 : $6.03

498

ATHD06-1-8S

Amphenol Sine Systems

Amphenol Sine Systems ATHD06-1-8S ATHD plug is a 1-position, size 8 power connector. This sealed thermoplastic housing uses ATHD contacts, supports field-installable heavy-duty power connections, and operates from -67F (-55C) to 257F (125C).

3 : $3.1
10 : $2.825
50 : $2.6
100 : $2.25
200 : $2.125
500 : $2.0375

315

AT16-18SA-EK02

Amphenol Sine Systems

Amphenol Sine Systems AT16-18SA-EK02 AT Series connector plug is an 18-way, Key A housing for Deutsch DT-compatible assemblies. It supports 20-14 gauge wire and uses durable thermoplastic with front and rear silicone seals for environmental protection.

1 : $9.78
10 : $8.96
50 : $8.15
100 : $7.59
200 : $7.03
500 : $6.68

147

ATV06-18SA

Amphenol Sine Systems

Amphenol Sine Systems ATV06-18SA ATV Series connector plug is an 18-way, Key A plug housing rated 13A with size 16 contacts. It supports 20-14 Ga. wire, provides IP67 protection when mated, and operates from -67F (-55C) to 257F (125C).

1 : $8.12
10 : $7.49
50 : $6.86
100 : $6.43
200 : $6.0
500 : $5.73

18S-R22 Verteiler

Link URL